Showing 3720–3730 of 9438 results

Specify an SRSR for easy rear access to equipment connections in millwork, cabinets and flush in-wall installations. Available with a 19” or 23” useable depth, the SRSR system extends and rotates 90º in either direction, making it ideal for smaller systems.

Specify an SRSR for easy rear access to equipment connections in millwork, cabinets and flush in-wall installations. Available with a 19” or 23” useable depth, the SRSR system extends and rotates 90º in either direction, making it ideal for smaller systems.

Specify an SRS for rear access to equipment connections in millwork and cabinets. System extends a full 19” but does not rotate. Good for smaller millwork and in-wall installations.

Specify an SRS for rear access to equipment connections in millwork and cabinets. System extends a full 19” but does not rotate. Good for smaller millwork and in-wall installations.

Triple hinged, full width carrier for reliable cable support

"Seismic certified riser base shall be Middle Atlantic Products model # SRB-3-WRK-2724 to accommodate 3 qty WRK Series racks. Seismic certified riser base shall be constructed of 11-gauge steel and shall be 24"" H x 72.81” W x 27.63” D. Seismic certified riser bases shall be finished with a durable textured black powder coat finish. Seismic Certified Riser Bases shall satisfy the 2007 & 2010 CBC; 2006, 2009 & 2012 IBC; ASCE 7-05 (2005 Edition) & ASCE 7-10 (2010 Edition) and the 2006 & 2009 editions of NFPA 5000 for use in areas of high seismicity, Seismic Use Group III, Zone 4 or Seismic Design Category (SDC) “D” with lateral force requirements for protecting 2,450 lbs. of essential equipment (3 Bay) in upper floor installations when used in conjunction with the WRK-Z4 floor anchor brackets. Rack shall be OSHPD approved for fixed equipment anchorage in California healthcare facilities. SRB shall be GREENGUARD Indoor Air Quality Certified for Children and Schools. SRB shall be RoHS EU Directive 2002 / 95 / EC compliant. Seismic certified riser base shall be warrantied to be free from defects in material or workmanship under normal use and conditions for the lifetime of the product."

"Designed to provide the same cable management facilities as our standard riser bases the SRB Series riser bases have been seismic certified to the following codes and standards: 2007 & 2010 CBC; 2006, 2009 & 2012 IBC; ASCE 7-05 (2005 Edition) & ASCE 7-10 (2010 Edition) and the 2006 & 2009 editions of NFPA 5000 for use in areas of high seismicity – Zone 4 or Seismic Design Category (SDC) “D”. These are designed for Mission Critical and/or High-Importance Installations in locations with the highest level of seismicity and top floor or rooftop installations including those within UBC and CBC Essential facilities or IBC, ASCE 7, and NFPA 5000 Seismic Use Group III facilities. For all codes, the Importance factor (Ip) is 1.5. Seismic Certified load capacity of 1,000 lbs (1 Bay), 1,750 lbs (2 Bay), and 2,450 lbs (3 Bay) when used with the appropriate seismic floor anchor brackets. With a standard 24"" height (custom heights from 9""-24""available upon request), these riser bases are constructed of rugged 11-gauge steel. OSHPD approved for fixed equipment anchorage in California healthcare facilities. Available for select enclosures, these riser bases require the use of seismic brackets."

Middle Atlantic Products SR28-IVCMF-46 rack accessory Finger kit

With the innovative RSH custom rackmounts, virtually any component can be installed in a standard 19” enclosure without modification. Custom cut to provide a perfect opening for the face of the component that is being mounted, each RSH unit provides a neatly-trimmed installation with a perfect fit and no gaps. With accurate details on over 9,500 components in our measured unit database, chances are we have the component needed on file. Unit assembles easily in minutes and includes rear brackets to prevent the mounted component from sliding back. Fully ventilated ears and bottom promote cooling. Depending on the needs of the installation, the units can be ordered with a black textured finish (model RSH4S) or a black brushed and anodized finish (model RSH4A). Bottom depths are automatically provided in 11-1/2”, 14”, 15-1/2”, 17-1/2”, or 20-1/2” styles. Custom rackmounts will accept any component up to 17-3/4” wide. Individual custom faces (less rack ears and shelf bottom) are also available in a black textured finish (model SFACE) or a black brushed and anodized finish (model AFACE). LCD rackmounts also available to mount most LCD monitors with up to a 17” screen size or with a maximum width of 17-3/8”. NOTE: custom rackshelf height is specified at the factory based on physical restrictions. Visit middleatlantic.com to find heights on all measured components, or design the system in RackTools® or Visio® Blocks, which are both updated regularly with the latest components.

With the innovative RSH custom rackmounts, virtually any component can be installed in a standard 19” enclosure without modification. Custom cut to provide a perfect opening for the face of the component that is being mounted, each RSH unit provides a neatly-trimmed installation with a perfect fit and no gaps. With accurate details on over 9,500 components in our measured unit database, chances are we have the component needed on file. Unit assembles easily in minutes and includes rear brackets to prevent the mounted component from sliding back. Fully ventilated ears and bottom promote cooling. Depending on the needs of the installation, the units can be ordered with a black textured finish (model RSH4S) or a black brushed and anodized finish (model RSH4A). Bottom depths are automatically provided in 11-1/2”, 14”, 15-1/2”, 17-1/2”, or 20-1/2” styles. Custom rackmounts will accept any component up to 17-3/4” wide. Individual custom faces (less rack ears and shelf bottom) are also available in a black textured finish (model SFACE) or a black brushed and anodized finish (model AFACE). LCD rackmounts also available to mount most LCD monitors with up to a 17” screen size or with a maximum width of 17-3/8”. NOTE: custom rackshelf height is specified at the factory based on physical restrictions. Visit middleatlantic.com to find heights on all measured components, or design the system in RackTools® or Visio® Blocks, which are both updated regularly with the latest components.