Showing 3790–3800 of 9438 results

The SNE Series is the most advanced security and network rack enclosure available. This purpose-built series was designed to meet the specific requirements of IP (networking), analog, digital and hybrid systems.

The SNE Series is the most advanced security and network rack enclosure available. This purpose-built series was designed to meet the specific requirements of IP (networking), analog, digital and hybrid systems.

Bracket for Top Cable Pass-Through Enclosure To Enclosure. Provides ability to pass cables from enclosure to enclosure when ganged together.

These cable chase panels were designed specifically for the SNE Series. Top panel sells separately from the front and back panels to increase installation flexibility.

EIA compliant 19” gangable digital security network enclosure shall be Middle Atlantic Products model # SNE__D-__-P_ (refer to chart). Overall dimensions shall be __”H x __”W x __”D (refer to chart). Useable height shall be __ rackspaces, useable depth shall be __” (refer to chart). Fully welded construction shall provide a static capacity of 12,000 lbs., a UL Listed load capacity of 3,000 lbs., and casters shall provide a capacity of 1,600 lbs. SNE shall come equipped with two pairs of fully adjustable steel cage nut rackrail with 6MM mounting hardware in universal EIA spacing, black e-coat finish and numbered rackspaces. SNE shall include 70% vented front door, __rear doors (refer to chart), and flush locking split side panels. SNE shall include pair of Lever Lock™ mounting brackets. SNE shall have pre-threaded 5/16”-18 ganging holes. SNE shall be capable of ganging while fully loaded, using bolts only. SNE shall have passive cooling, front to rear. SNE shall have marked rackrail depth indicators. SNE shall be of fully welded construction. SNE shall be finished in an environmentally friendly, durable black powder coat. SNE Series enclosures shall satisfy the 2007 & 2010 CBC; 2006, 2009 & 2012 IBC; ASCE 7-05 (2005 Edition) & ASCE 7-10 (2010 Edition) and the 2006 & 2009 editions of NFPA 5000 for use in areas of high seismicity, Seismic Use Group III, Zone 4 or Seismic Design Category (SDC) “D” with lateral force requirements for protecting 1,050 lbs. of essential equipment in locations with the highest level of seismicity and top floor or rooftop installations with an Importance factor (Ip) of 1.5 when used with SNE-Z4 seismic floor anchor bracket. SNE shall be UL Listed in the US and Canada to the UL-2416 (NWIN) category. SNE shall be GREENGUARD Gold Certified. SNE enclosure shall be RoHS EU Directive 2002 / 95 / EC compliant. SNE shall be manufactured by an ISO 9001 and ISO 14001 registered company. SNE enclosure shall be warrantied to be free from defects in material or workmanship under normal use and conditions for the lifetime of the rack. The SNE Series Hybrid is configured for hybrid security systems consisting of a mix of analog and digital equipment and cabling. Accommodates small devices including encoders, power supplies and access control systems on the patented Zero-U Tool-Free Lever Lock™ system. • Fully configured Security Network Enclosure w/active ventilation for equipment rooms o 70% open area vented front door o Pair of split flush mount locking side panels o (2) vertical 10” wide Lever Lock™ accessory mounting plate o (1) 6” wide vertical wire grid lace o 30” width o 36” overall depth o 45 rackspace o 2 pair of tapped 10-32 adjustable rail o 4 space cage-nut adapter (pair) SNE Series Hybrid with Top Active Ventilation • Fan top with proportional speed thermostatic control provides 660 CFM ventilation • Solid split door

The SNE Series is the most advanced security and network rack enclosure available. This purpose-built series was designed to meet the specific requirements of IP (networking), analog, digital and hybrid systems.

SNE Series 27 Inch Wide Full Plexi, Front / Rear Door, 42 U, Black Finish

The SNE Series Digital is configured for digital (IP based) security systems consisting of high-density cabling, network equipment, and servers. Optional Tool-Free Lever Lock system accommodates small devices including encoders, power supplies, and Access Control Systems. Fully configured Security Network Enclosure with passive ventilation for data centers o 70% open area vented front door o 2 pair of adjustable cage-nut rackrail (including 6mm hardware) o Lever Lock compatible (accepts all Lever Lock vertical 21” accessories) o 27” width o 42” overall depth o 45 rackspace o 100 6mm cage-nuts/rack screws included SNE Series Digital with passive cooling (front to rear) 70% open area split rear door. Solid top with brush cable pass-through

Timesaving and practical, the Raised Floor Enclosure System™ consists of 2-1/2” high riser bases, which provide the ability to perform field rough-in procedures prior to the arrival of the racks and enclosures. Also handy as a lower cable chase for passing cables between racks in multi-bay applications, riser bases feature 1/8” thick fully welded construction and an attractive black powder coat finish. Riser bases feature knockouts for passing cables between joined riser bases. Riser feet bring riser bases to a 12” height for use with raised floors. Raised floor support angles support floor tiles when used with riser bases and feet. Custom width, depth and height RIB Series riser bases are also available, please call for details.

The SNE Series is the most advanced security and network rack enclosure available. This purpose-built series was designed to meet the specific requirements of IP (networking), analog, digital and hybrid systems.