Showing 5690–5700 of 5742 results

- 2.2kVA / 2200VA / 1920W line interactive 2U rack/tower UPS, Sine Wave- 120V output, Corrects brownouts and overvoltages from 83V to 145V- 0.9 Power Factor, Interactive LCD interface- Extended runtime options up to 1920W- 4 post compatible mounting accessories- 96% line-mode efficiency, 2 switched load banks- USB, RS232, EPO and network management card slot- 120V NEMA 5-20P input, 4 NEMA 5-15R & 4 NEMA 5-15/20R outletsTripp Lite SmartPro Line Interactive UPS with enhanced LCD interface offers network-grade power protection for critical server, network and telecommunications equipment. Line Interactive Uninterruptible Power Supply (UPS) with built-in Auto-Voltage Regulation (AVR) actively corrects brownouts and overvoltages back to usable levels while maintaining a full battery charge in case of power failure. Tripp Lite's unique configuration excels in exceptionally poor-power environments with two separate levels of voltage boost to correct both slight undervoltages and severe brownout conditions. Interactive LCD interface reports UPS operating mode, detailed UPS and site-power data, plus enables a variety of UPS setup and configuration options. Super-fast switchover from line to battery power occurs within milliseconds to maintain operation of connected equipment without interruption or reboot. 96% line-mode efficiency offers reduced heat emissions and operating costs. Communications interfaces support communications via USB, DB9 serial and slot for optional network management card options. HID-compliant USB port enables integration with built-in power management and auto shutdown features of Windows and Mac OS X. Network communications ports enable detailed monitoring of equipment load levels, self-test data and utility power conditions. PowerAlert monitoring software is available for free download. Switched output load banks enable scheduled and real-time remote reboot and load shedding of select outlets. Emergency Power Off (EPO) interface. LCD display panel easily rotates for viewing in rackmount or tower configurations. Audible alarm with push-button momentary alarm-cancel and silent-mode configuration options. Programmable self-test. Field-replaceable, hot-swappable battery modules.- Tripp Lite SM2200RMXL2UP line interactive 2U rack/tower UPS with 2200VA / 2.2kVA / 1920W capacity and extended runtime options- Line interactive UPS with Automatic Voltage Regulation (AVR) corrects brownouts and overvoltages from 83 to 145V- NEMA 5-20P input plug; 4 NEMA 5-15/20R and 4 5-15R output receptacles, Two independently switched output load banks- Maintains uninterrupted operation of connected networking equipment during blackouts, surges, brownouts and overvoltages- High 96% efficiency rating in line-power mode offers reduced power consumption and BTU emisssions- Internal batteries offer 12 minutes at 50% load (960W) and 4.5 minutes at 100% load (1920W)- Extended runtime is available with optional BP48V24-2U (limit 1), BP48V60RT-3U (multi-pack compatible) and BP48V27-2US (multi-pack compatible), Supports 1920 watts in standalone or extended run configurations- External battery configurations require the use of Tripp Lite's External Battery Configuration Software (see manual)- Hot-swappable, user-replaceable internal batteries and external battery packs can be replaced with no disruption to connected equipment- Intelligent battery management system extends battery life- Front panel LCD monitoring screen with MODE and ENTER buttons reports operating mode with 5-bar battery charge graphic, plus 7 selectable screens of detailed UPS and site power information- LCD interface also supports a number of advanced user setup and operating preferences- Ships with 4 post rackmount installation hardware; Optional 2POSTRMKITWM enables 2 post rackmount/wallmount installation; Optional 2-9USTAND enables tower placement- Built-in USB, DB9 and EPO (Emergency Power Off) interfaces- Compatible with Tripp Lite UPS management card options TLNETCARD, WEBCARDLX and SNMPWEBCARD- HID-compliant USB port enables integration with built-in power management and auto shutdown features of Windows and Mac OS X- USB & DB9 ports enable data-saving unattended shutdown when used with Tripp Lite's PowerAlert software, available via FREE download from www.tripplite.com/poweralert- Built-in Emergency Power Off (EPO) interface with cable

Eaton PW9130 700W 120V Replacement Battery 12 V 9 Ah

The U280-016-RM2U 16-Port USB Charging Station charges and syncs up to 16 tablets, smartphones and other USB-equipped devices at the same time. Recommended for schools, offices and other environments where multiple USB devices are used, this unit provides up to 5V, 2.4A (12W) of power to each port—plenty for charging battery-intensive devices like the iPad®, iPod®, iPhone® and Android® tablets and smartphones. LED indicators signal the ports in use.This 16-port charging station supports USB 2.0 data transfer rates up to 480 Mbps and is backward compatible with previous USB generations. To keep up with current technology, a mini-USB firmware port enables software upgrades that allow the charging station to support newer devices.In addition to charging, the U280-016-RM2U syncs any USB device using its compatible software—Apple® iTunes® or Apple Configurator, for instance. An included USB cable attaches to the unit’s USB-B port and the USB-A port on a computer for syncing purposes. The durable steel housing mounts in 2U of an EIA-standard 19-inch rack using the included hardware. It also includes four rubber mounting feet for installing the unit on a level surface that can sustain its weight and the weight of the connected cables. An included power cord connects to both the unit’s C14 rear inlet and a standard AC power outlet.

Cisco PWR-66W-AC-V2= power adapter/inverter Indoor Black

The CSHANDLEKIT2 Mobile Cart Conversion Kit includes a reversible handle, rolling casters and a power cord manager that easily attach to your Tripp Lite 16-device AC or USB charging station, such as CSC16AC, CSC16ACW and CSC16USB. Perfect for schools, offices, warehouses, healthcare facilities and other locations where multiple tablets, laptops or Chromebooks are used regularly, the CSHANDLEKIT2 allows for smooth mobility of your charging station. The four rolling casters are non-marking for environments where this is mandatory. All four casters lock into place for maximum stability at rest. The casters, easy-grip handle and convenient power cord manager mount to the charging station using the included hardware. The CSHANDLEKIT2 supports a maximum load capacity of 158 kgs (350 lbs.) Converts Your 16-Device AC or USB Charging Station Into a Mobile Cart ● Adds reversible handle, rolling casters and power cord manager to CSC16AC, CSC16ACW, CSC16USB and other compatible charging stations ● Ideal for schools, offices, warehouses, healthcare facilities and other locations where multiple tablets, laptops or Chromebooks are used regularly ● Supports a maximum load capacity of 158 kg (350 lb.) ● 4 swivel/locking casters—all are non-marking ● Comes with all necessary installation hardware● Converts a 16-device charging station into a mobile cart ● Supports maximum load capacity of 350 lb. ● Includes reversible handle and power cord manager ● Includes 4 swivel/locking casters ● Comes with all necessary installation hardware Package Includes● Reversible handle ● Power cord manager ● (4) Non-marking casters, 4 in. ● (2) Caster-mounting brackets ● (2) Handle-mounting brackets ● (12) M5 screws ● (12) M5 locking washers ● (16) M6 screws ● (16) M6 locking washers ● (16) M6 flat washers ● Owner's manual

The U280-032-RM 32-Port USB Charging Station charges and syncs up to 32 tablets, smartphones and other USB-equipped devices at the same time. Recommended for schools, offices and other environments where multiple USB devices are used, this unit provides up to 5V, 2.4A (12W) of power to each port—plenty for charging battery-intensive devices like the iPad®, iPod®, iPhone® and Android® tablets and smartphones. LED indicators signal the ports in use.This 32-port charging station supports USB 2.0 data transfer rates up to 480 Mbps and is backward compatible with previous USB generations. To keep up with current technology, a mini-USB firmware port enables software upgrades that allow the charging station to support newer devices.In addition to charging, the U280-032-RM syncs any USB device using its compatible software—Apple® iTunes® or Apple Configurator, for instance. An included USB cable attaches to the unit’s USB-B port and the USB-A port on a computer for syncing purposes. The durable steel housing mounts in 2U of an EIA-standard 19-inch rack using the included hardware. It also includes four rubber mounting feet for installing the unit on a level surface that can sustain its weight and the weight of the connected cables. An included power cord connects to both the unit’s C14 rear inlet and a standard AC power outlet.Charges Up to 32 Tablets, Smartphones and Other USB Devices- Recommended for schools, offices and other environments where multiple USB devices are used- Compatible devices include iPad, iPod, iPhone and Android tablets and smartphones- Provides up to 5V, 2.4A (12W) of charging power to each port- LED indicators signal ports in use- Backward compatible with previous USB generations- Supports data transfer rates up to 480 MbpsAlso Syncs Devices via Connected Computer- Syncs USB devices using its compatible software, such as iTunes or Apple Configurator- Included USB cable connects USB-B port and computer’s USB-A portMini-USB Firmware Port- Enables future software upgrades to support newer devicesEasy Installation and Connection- Mounts in 2U of EIA-standard 19 in. rack using included hardware- Also installs on level surface using included rubber feet- Conveniently configures for professional, educational or personal installation- 10 ft. NEMA 5-15P to C13 power cord included- Durable steel housingTAA-Compliant- Complies with the Federal Trade Agreements Act (TAA) for GSA Schedule purchasesSystem Requirements- Tablet, smartphone or other smart device with USB port- Computer with available USB port (if syncing)Package Includes- U280-032-RM 32-Port USB Charging Station- NEMA 5-15P to C13 power cord, 10 ft.- USB 2.0 A/B cable, 6 ft.- (4) Rubber mounting feet- Mounting hardware- Owner’s manual

Recommended to protect mission-critical equipment, Liebert GXT4 is a true on-line UPS that delivers continuous, high-quality AC power with no break when transferring to battery. It protects equipment from all power disturbances due to blackouts, brownouts, sags, surges or noise interference.​Liebert® GXT4™ is a true on-line UPS that delivers continuous, high-quality AC power to IT equipment with no break when transferring to battery. It protects equipment from virtually all power disturbances due to blackouts, brownouts, sags, surges or noise interference.For robust protection from 500-10,000VA, these Liebert GXT4 UPS models provide industry leading features in a compact design.​Features​​- On-Line design means zero transfer time. When utility power fails, your critical load remains supported by a seamless flow of power.- Highest level of protection available in this UPS capacity range.- Eco mode option allows improved energy efficiency.- Easy serviceability with replaceable, hot swappable batteries.- Control power to multiple devices via two independently programmable pair of outlets (500-3000VA models only.)- Rack mount kit & batteries included as standard in all models- Web / SNMP communications card included as standard in 5-10kVA models- Energy Star qualified model- Intelligent-ready networkingBenefits- Intelligent-ready networking- Power factor correction- Frequency conversion- Internal automatic bypass to protect against adverse conditions- Manual bypass capability- Support for up to six external battery cabinets for extended run-time

Power Supply for LongView 3000/4000 series Products

Recommended to protect mission-critical equipment, Liebert GXT4 is a true on-line UPS that delivers continuous, high-quality AC power with no break when transferring to battery. It protects equipment from all power disturbances due to blackouts, brownouts, sags, surges or noise interference.​Liebert® GXT4™ is a true on-line UPS that delivers continuous, high-quality AC power to IT equipment with no break when transferring to battery. It protects equipment from virtually all power disturbances due to blackouts, brownouts, sags, surges or noise interference.For robust protection from 500-10,000VA, these Liebert GXT4 UPS models provide industry leading features in a compact design.​Features​​- On-Line design means zero transfer time. When utility power fails, your critical load remains supported by a seamless flow of power.- Highest level of protection available in this UPS capacity range.- Eco mode option allows improved energy efficiency.- Easy serviceability with replaceable, hot swappable batteries.- Control power to multiple devices via two independently programmable pair of outlets (500-3000VA models only.)- Rack mount kit & batteries included as standard in all models- Web / SNMP communications card included as standard in 5-10kVA models- Energy Star qualified model- Intelligent-ready networkingBenefits- Intelligent-ready networking- Power factor correction- Frequency conversion- Internal automatic bypass to protect against adverse conditions- Manual bypass capability- Support for up to six external battery cabinets for extended run-time

This specification defines the electrical and mechanical characteristics and requirements for a continuous-duty, single-phase, maintenance bypass / power output distribution system. This system, hereafter referred to as the POD, provides high-quality maintenance by pass capability for all micro UPS products up to and including 3kVA.The POD is designed in accordance with the applicable sections of the current revision of the following standards. Where a conflict arises between these standards and statements made herein, the statements in this specification shall govern. The POD is stand alone UL listed. The POD units can be used with any manufactures UPS that meets the UL standards listed below.