Showing 60–70 of 273 results

20A C20-to-C19 Power Cable for Network Devices That Require a Heavy-Gauge ConnectionThis package of six heavy-duty extension cords features 12 AWG wire suitable for high power connections, making it a reliable solution for large server applications that require a higher-rated, heavier-gauge cable. These cords can be used to connect servers, routers, network switches and blade server enclosures to a UPS system or PDU or replace or upgrade the standard power cords provided by the devices' manufacturers. The 2-ft. (0.61 m) length helps reduce cable clutter and minimize the risk of tripping.

C14-to-C13 Power Cable Connects Computers, Printers, Servers and Other EquipmentThis IEC-320-C14 to IEC-320-C13 cable is designed for small data center, office workstation and other lower-amp applications. This C14 male to C13 female cord can be used to power a computer, server or monitor; attach a server or drive to a UPS system or PDU; or extend an existing connection up to 4-ft. (1.22 m). The 4-ft. (1.22 m) length helps reduce cable clutter and minimize the risk of tripping.

Heavy-duty extension cord transforms a C20 plug into a NEMA 5-20P plug and extends an existing connection up to 6 ft.Heavy-Duty Extension Cable Connects Devices That Require a Heavy-Gauge ConnectionThis heavy-duty extension cord features 12 AWG wire suitable for high power connections, making it a reliable solution for large server applications that require a higher-rated, heavier-gauge cable. This C19 to 5-20P cord can be used to connect a high-output device to a wall outlet or a PDU or UPS with 5-20R outlets. It is also a recommended replacement or upgrade of a standard power cord provided by the device’s manufacturer. The six-foot (1.8-meter) length allows you flexibility in placing equipment with respect to the power outlet.

13-amp extension cord connects two devices with 5-15P/5-15R power connectors or extends your existing power connection.15-Foot Extension Cord Connects Printers, Servers and Other EquipmentThis power extension cable is designed for small data center or office workstation applications that do not require a heavy-gauge connection. With a right-angle NEMA 5-15P plug on one end and a NEMA 5-15R receptacle on the other, this cord can be used to power a printer or monitor; attach a rack server to a UPS system or PDU; or extend an existing connection up to 15 feet (4.6 meters). The 15-foot length allows you great flexibility in placing equipment with respect to the power outlet.Right-Angle Plug Makes Connecting in Tight Spaces EasierThe space-saving right-angle NEMA 5-15P connector is easy to install in confined spaces, such as behind your computer desk or workstation. The right-angle construction also relieves strain on the cable and connector and prevents the cable from bending awkwardly.

Tripp Lite's line of AC power cords offer PC users a solution to their power connectivity problems. This 6.09 m (20-ft.) cable will replace the power cord on most computers and peripherals. Cable features an AC style plug (NEMA 5-15P) on one end and a computer style receptacle (IEC-320-C13) on the other end. UL Listed.- Plug Type - NEMA 5-15P (AC) to IEC-320-C13 (Device)- 18AWG, SJT, 10A, 125V- UL Listed- 6.09 m (20-ft.) replacement power cable for a PC, printer, monitor or any other device with like plugs - Universal design

Computer AC Power Cable Connects Computers, Monitors and Other EquipmentThis computer AC power cable is designed for low-voltage data center, server room or home/office applications. It converts a NEMA 5-15P plug into a C14 connector. You can use it to connect a computer, monitor, printer or other device with a NEMA 5-15P plug to a surge protector, UPS system or PDU with C13 power outlets. You can also connect your C13 printer or monitor to a switched source on your PC, allowing you to turn both devices on and off at the same time. The 2-ft. (0.61 m) length helps reduce cable clutter.

Tripp Lite's Heavy Duty C19 to L6-20P 6 ft. power cord is constructed with 3 x 12AWG copper conductors, fully molded ends, and 250V/20A rating.- Molded, Heavy-Duty Power Cord, 6 ft.- IEC-320-C19 to NEMA L6-20P- 12AWG, SJT, 20A, 250V- RoHS compliant

Hospital-Grade Power Cable is a Safe Solution for Medical FacilitiesThis hospital-grade IEC power cord is designed for computers, mobile carts, printers, scanners, monitors and other compatible equipment with a three-pin C14 inlet in a hospital or other medical facility. It features a locking C13 end for connecting to a device and a NEMA 5-15P-HG plug for connecting to a hospital-grade AC power source located outside patient care vicinities. The 10-foot length allows you great flexibility in placing equipment with respect to the power outlet.Locking C13 Connector Helps Prevent Accidental Disconnection and Expensive DowntimeHaving a cable come loose accidentally can mean the loss of power and costly downtime. The locking C13 connector helps you avoid such danger, protecting critical equipment by maintaining a secure link without failure. The locking cable is also invaluable when moving equipment in a rack or removing equipment from tight areas, ensuring the power cord always stays connected.Lifetime WarrantyThe P006-L10-HG10 is backed by a lifetime warranty, ensuring reliability and performance.- Connects a PC, printer, monitor, scanner or other hospital equipment with a C14 inlet to a grounded hospital-grade AC outlet- Recommended for connecting devices to power outlets outside patient care vicinities- 10 ft. length allows great flexibility in placing devices in relationship to AC outlet- Hospital-grade power cable replaces or upgrades power cord provided by manufacturer- NEMA 5-15P-HG plug connects to AC power; C13 plug connects to device’s C14 inlet- Locking C13 connector maintains secure link to avoid loss of power and costly downtime

13-amp extension cord connects two devices with 5-15P/5-15R power connectors or extends your existing power connection.12-Foot Extension Cord Connects Monitors, Printers, Servers and Other EquipmentThis power extension cable is designed for small data center or office workstation applications that do not require a heavy-gauge connection. With a NEMA 5-15P plug on one end and a NEMA 5-15R receptical on the other, this UL listed (UL 817) cord can be used to power a printer or monitor, attach a rack server to a PDU or extend an existing connection up to 12 feet (3.7 meters). The 12-foot length allows you more flexibility in placing equipment with respect to the power outlet.

Extends the length of your existing power cord with NEMA 5-15P plug by 15 ft.- Durable SJT jacket- UL listed- 15 ft. long- 120V/15A rating- 14 AWG