Showing 100–110 of 273 results

Connects network hardware with a C16 power inlet, such as an Ethernet switch, to a PDU, UPS system or other AC power source with a NEMA 5-15R outlet.- Right-angle C15 connector easy to connect in tight spaces- Flexible 14 AWG wire for easy routing- 125V/15A rating- UL-listed- Recommended for Cisco®, HP and other C15-compatible hardwareThe P019-008-C15RA Heavy-Duty Power Cord features molded NEMA 5-15P and C15 connectors for attaching network hardware with a C16 inlet to a PDU, UPS system or other AC power source with a NEMA 5-15R outlet. This eight-foot cord supports voltages up to 125V. It’s UL listed and features a flexible SJT jacket and 14 AWG wire for easy routing through tight areas. In addition, the C15 connector is fixed at a right angle to allow more room for the cord and allow equipment to be pushed against a wall. The P019-008-C15RA is recommended for Cisco, HP and other hardware that accept C15 power connectors.Heavy-Duty Power SolutionConnects network hardware with C16 power inlet to PDU, UPS system or AC wall socket with NEMA 5-15R outletIdeal for replacing an old or lost cordRecommended for Cisco, HP and other C15-compatible hardwareRight-Angle C15 ConnectorAllows more room for connecting in tight spaces and moving connected equipment against a wallOptimum Construction- Molded NEMA 5-15P and C15 connectors- Flexible SJT jacket and 14 AWG wire for easy routing- 125V/15A rating- UL-listed

20A C20-to-C21 Power Cable for Network Devices That Require a Heavy-Gauge ConnectionThis heavy-duty cord features 12 AWG wire suitable for high power connections, making it a reliable solution for large server applications that require a higher-rated, heavier-gauge cable. This cord can be used to connect a blade server, large router or network switch with a C22 inlet, usually found on high-powered, high-temperature (maximum pin 155°C/311°F) equipment, to a PDU or UPS system. It’s an ideal choice for upgrading or replacing the standard power cord provided by the device’s manufacturer. The three-foot (0.9-meter) length helps reduce cable clutter and minimize the risk of tripping.

20A C20-to-C21 Power Cable for Network Devices That Require a Heavy-Gauge ConnectionThis heavy-duty cord features 12 AWG wire suitable for high power connections, making it a reliable solution for large server applications that require a higher-rated, heavier-gauge cable. This cord can be used to connect a blade server, large router or network switch with a C22 inlet, usually found on high-powered, high-temperature (maximum pin 155°C/311°F) equipment, to a PDU or UPS system. It’s an ideal choice for upgrading or replacing the standard power cord provided by the device’s manufacturer. The 10-foot (3-meter) length allows you great flexibility in placing equipment with respect to the power outlet.

The P046-015-LL-30A Heavy-Duty Power Extension Cord features a NEMA L5-30P plug on one end and a NEMA L5-30R receptacle on the other, allowing you to extend the length of your existing power cord. Both molded connectors twist and lock into place, which prevents disconnection via jostling or other accidental impact. The 15-foot 10 AWG cord is rated for 125V and 30A. Its durable PVC jacket is designed to last a long time.- NEMA L5-30R receptacle at opposite end- Molded locking connectors prevent accidental disconnection- Integral strain relief- 125V/30A rating- Durable PVC jacket- 15 ft. long

The P046-006-LL-30A Heavy-Duty Power Extension Cord features a NEMA L5-30P plug on one end and a NEMA L5-30R receptacle on the other, allowing you to extend the length of your existing power cord. Both molded connectors twist and lock into place, which prevents disconnection via jostling or other accidental impact. The six-foot 10 AWG cord is rated for 125V and 30A. Its durable PVC jacket is designed to last a long time.- NEMA L5-30R receptacle at opposite end- Molded locking connectors prevent accidental disconnection- Integral strain relief- 125V/30A rating- Durable PVC jacket- 6 ft. long

13-amp extension cord connects two devices with 5-15P/5-15R power connectors or extends your existing power connection.3-Foot Extension Cord Connects Monitors, Printers, Servers and Other EquipmentThis power extension cable is designed for small data center or office workstation applications that do not require a heavy-gauge connection. With a NEMA 5-15P plug on one end and a NEMA 5-15R receptable on the other, this UL listed (UL 817) cord can be used to power a printer or monitor, attach a rack server to a PDU or extend an existing connection up to three feet (0.9 meters). The three-foot length allows you a bit more flexibility in placing equipment with respect to the power outlet.

13-amp extension cord connects two devices with 5-15P/5-15R power connectors or extends your existing power connection.6-Foot Extension Cord Connects Monitors, Printers, Servers and Other EquipmentThis power extension cable is designed for small data center or office workstation applications that do not require a heavy-gauge connection. With a NEMA 5-15P plug on one end and a NEMA 5-15R receptable on the other, this UL listed (UL 817) cord can be used to power a printer or monitor, attach a rack server to a PDU or extend an existing connection up to six feet (1.8 meters). The six-foot length allows you more flexibility in placing equipment with respect to the power outlet.

Safe, Reliable Power SolutionConnects PDU or UPS system with C14 input to network hardware with C15 power connectorsIdeal for replacing an old or lost cordRecommended for Cisco, HP and other C15-compatible hardwareColor-Coded Cable and ConnectorsColored red for easy identification in crowded rack or workstationOptimum Construction14 AWG wireFlexible SJT jacket250V/15A ratingUL-listed

C15 to C14 Power Cord for Network Devices That Require a Heavy-Gauge ConnectionThis 250V C15 to C14 cable features 14 AWG wire suitable for high power connections, making it reliable for large server applications that require a higher-rated, heavier-gauge cable. The C15 connector is designed for higher-temperature devices, such as electric kettles, PoE (Power over Ethernet) switches with high-wattage power supplies, and similar network components. This IEC C14 to IEC C15 cord can also replace or upgrade the standard power cord provided by the device's manufacturer. The 2-ft. (0.61 m) length helps reduce cable clutter and minimize the risk of tripping.Color-Coded to Avoid Misidentification That Can Cause Costly DowntimeThis C15 to C14 power cable features an orange SJT jacket and fully molded orange ends. The color-coding allows easy, fast identification in a crowded rack or workstation and helps prevent the cable from becoming inadvertently disconnected.

C15 to C14 Power Cord for Network Devices That Require a Heavy-Gauge ConnectionThis 250V C15 to C14 cable features 14 AWG wire suitable for high power connections, making it reliable for large server applications that require a higher-rated, heavier-gauge cable. The C15 connector is designed for higher-temperature devices, such as electric kettles, PoE (Power over Ethernet) switches with high-wattage power supplies, and similar network components. This IEC C14 to IEC C15 cord can also replace or upgrade the standard power cord provided by the device's manufacturer. The 2-ft. (0.61 m) length helps reduce cable clutter and minimize the risk of tripping.Color-Coded to Avoid Misidentification That Can Cause Costly DowntimeThis C15 to C14 power cable features a red SJT jacket and fully molded red ends. The color-coding allows easy, fast identification in a crowded rack or workstation and helps prevent the cable from becoming inadvertently disconnected.