Showing 0–10 of 46 results

The PV150USB PowerVerter® Ultra-Compact Car Inverter provides 150 watts of portable power for charging and operating multiple devices in your vehicle. It converts 12V DC power into standard household 110V AC power to run a wide variety of electronics, such as smartphones, laptops, tablets, GPS units, game systems, portable TVs, DVD players and MP3 players, as well as low-power lights, camping accessories, battery rechargers for small battery-operated power tools, and mobile office equipment.This power inverter features a NEMA 5-15R outlet, a 2.1A USB charging port and a 1.0A USB charging port. Just plug the 12V DC input jack with convenient three-foot cord into the 12V outlet in your vehicle, and the PV150USB is ready to operate.To prevent you from running down your battery, the PV150USB turns off automatically when the input voltage falls to 10V. Likewise, the unit will also shut down if it gets too hot (for instance, because the connected devices exceed 150 watts). A built-in ventilation fan keeps the interior cool during extended use. The durable metal housing is engineered to withstand the rigors of road trips, campouts, business trips and family vacations. No maintenance is required.Powers and Charges Up to 3 Devices- Converts 12V DC battery power to standard 110V AC power- Runs smartphones, laptops, tablets, GPS units, game systems, portable TVs, DVD players, MP3 players and other electronics- Features NEMA 5-15R outlet and 2.1A and 1.0A USB charging ports- Outputs 150 watts (continuous); 300 watts (peak)Easy to Use- DC jack plugs into 12V DC cigarette lighter accessory outlet in your car, truck, boat or RV- Flexible 3 ft. cord allows devices to run in the back seatPremium Construction- Durable metal housing built to withstand rigors of travel- Built-in ventilation fan keeps the interior cool during extended use- Automatic low-voltage shutoff prevents deep vehicle battery discharge at 10V- No maintenance required

"Tripp Lite PV150. Input voltage: 12 V, Output voltage: 120 V, Country of origin: Taiwan. Width: 3.75"" (95.2 mm), Depth: 5.75"" (146 mm), Height: 1.75"" (44.4 mm). Package width: 2.25"" (57.2 mm), Package depth: 6.6"" (167.6 mm), Package height: 6.22"" (158 mm). Master (outer) case width: 7"" (177.8 mm), Master (outer) case length: 13.9"" (353.1 mm), Master (outer) case height: 7.48"" (190 mm). Dimensions (WxDxH): 3.74 x 5.75 x 1.75"" (95 x 146 x 44.5 mm), I/O ports: 1 x NEMA 5-15R, Weight (imperial): 1.2 lbs"

Mobile Sine Wave Inverter Charges and Powers Multiple Electronic Devices in Your VehicleYou don’t have to be near an AC power source to keep your mobile devices fully charged and your power tools operating. This 600W mobile inverter converts 12V DC power from your car, utility truck, fleet vehicle, boat or RV’s battery into pure sine wave 110V AC power. Just connect the included battery cables between the PINV600SW-120’s DC input terminals and the positive and negative terminals on your vehicle’s battery.AC Outlets Provide Portable Power for Your Mobile ApplicationsThis compact power inverter provides pure sine wave AC output for use at remote locations, such as campgrounds, construction sites and mobile offices. Two NEMA 5-15R outlets provide a continuous output of 600W and a peak output of 1200W. That’s plenty to operate a variety of appliances and power tools, such as low-power lights, telemetry equipment, smart battery rechargers for small battery-operated power tools, and mobile office equipment.USB Charging Ports Keep Your Devices at Full StrengthA 5V USB-A port outputs DC power up to 2.1A. A USB-C port outputs 5V/9V/12V fast-charging up to 18W maximum. Both USB ports remain active when the inverter’s on/off switch is set to Off. This allows you to charge your smartphone, tablet, laptop or GPS unit without draining too much power from the vehicle’s battery.Includes the Latest Safety Features to Protect Your Equipment and BatteryThe on/off switch offers one-touch control over both AC outlets. If the power input from the vehicle’s battery drops below 10V or exceeds 16V, the PINV600SW-120 will automatically shut down. Green and red LEDs indicate normal and improper operation. A load-controlled fan begins cooling automatically when the internal temperature rises to a certain level during extended use. An audible alarm sounds during excessively high/low voltage or fault conditions.Brackets Included for Permanent MountingThe durable aluminum housing withstands the rigors of worksites, construction sites, business trips and family vacations. Use the built-in mounting brackets and included hardware to permanently install the inverter in a horizontal position.

Tripp Lite's APS700HF Ultra-Compact DC-to-AC inverter with automatic line-to-battery transfer and integrated charging system serves as an extended run UPS, a standalone power source or an automotive inverter. Supplies up to 700 watts of continuous 120V AC power to 1 AC outlet from any 12V battery or automotive DC source. OverPower inverter output feature provides up to 120% of the continuous output for up to 5 seconds, and DoubleBoost inverter output feature delivers up to 200% of the continuous output for up to 2 seconds, providing the extra power needed to cold start heavy-duty tools and motorized equipment. When AC cable is connected to a live wall socket, commercial power passes through to connected equipment and the battery set is recharged via 3-stage, 6-amp charging system. In UPS mode, the APS system responds to blackouts and voltage fluctuations with a near instantaneous automatic transfer to battery-derived AC output. Includes a set of high current DC input terminals for simple installation (user supplies batteries and cabling - see owner's manual for recommendations). Passes sine wave utility or generator power during battery charging and UPS line power mode, plus efficient PWM sine wave AC output in inverter and UPS backup modes. Supports an unlimited amount of runtime with any number of user-supplied batteries connected.- 12V DC or 120V AC input; 120V AC output; 1 outlet- 700 watts continuous, 1050 watts OverPower and 1400 watts DoubleBoost inverter output- 6 amp rated, 3-stage, built-in battery charger- Auto Transfer Switching option for battery backup / UPS operation - with ISOBAR AC surge suppression- Ultra-compact, lightweight aluminum housing weighs only 4 lbs. / 1.8 kg

"- APS1250 serves as an automotive or stationary DC-to-AC inverter with automatic line-to-battery transfer and integrated battery charger.- Supports 120V AC output from a 120V AC line power source or 12V DC battery source.- 16.6 millisecond automatic transfer between line and battery power supports UPS protection during blackouts and voltage fluctuations for equipment compatible with a one cycle transfer time.- 1250 watts continuous AC output in inverter mode, 1440 watts continuous AC output in AC mode.- Double Boost™ inverter output supports momentary startup loads up to 200% of the continuous rating for up to 10 seconds.- OverPower™ inverter output supports longer duration overloads to 150% for 1-60 minutes under ideal battery and temperature conditions (For best results, utilize OverPower usage for as short of a duration as possible, ensure battery bank and cabling is able to provide full nominal DC voltage under load and allow inverter/charger to fully cool before and after OverPower usage).- 3 stage, 30 amp battery charger with adjustable settings for wet/gel battery types offers fast, reliable battery recharging.- Protected hardwire bolt-down input lugs safely accept heavy gauge input wiring from attached battery bank.- Two built-in NEMA 5-15R output receptacles pass 120V line power or inverter output through to connected equipment.- Reliability enhanced large-transformer design with secure mounting flanges and protected DC wiring terminals.- Moisture-resistant construction enables vehicular or marine operation in high humidity environments.- 3 position operating mode switch supports ""AUTO"" mode to enable automatic transfer between DC and AC modes, CHARGE-ONLY to maintain a full battery charge when AC is present without auto transfer and SYSTEM OFF settings.- Set of six front panel LEDs display AC/DC operational modes, overload status, DC voltage level, shutdown status and system fault status.- Set of 4 configuration dipswitches support wet/gel battery charging profiles, adjustable 135/145V high voltage auto transfer during overvoltages and selectable 75/85/95/105V AC low voltage auto transfer during brownouts.- Resettable 8A charger AC input breaker and resettable 12A AC output breaker and automatic 2 speed cooling fan protect the inverter from load and temperature related failures.- Grounding lug properly connects the inverter/charger system to earth ground or vehicle grounding system.- Automatic overload and thermal shutoff safely turns off inverter as excessive loads or overheating conditions develop.- Front panel remote control connector enables remote off/on switching (requires APSRM4 switch accessory). Optional APSRM4 accessory also includes user configurable jacks to support inverter shutoff or startup as a vehicle ignition is engaged."

Utilize your vehicle's battery to efficiently power office equipment on the road. Continuously supplies up to 375 watts of 120V AC power to 2 AC outlets from any 12V battery or automotive DC source. Convenient cigarette lighter DC input jack with 3-ft. cable provides 1-step installation. Portable and compact, the inverter's design is among the most rugged available thanks to its lightweight metal casing.- Allows users to run AC devices from any 12V cigarette lighter socket- Converts 12V DC battery power to 120V AC power- 375 watts continuous output power; 600 watts peak output power (instantaneous)- 2 outlets- 3-ft. cord with cigarette lighter plug- Ultra compact, lightweight design with all-metal housing- Low battery alarm with auto-shutoff preserves vehicle battery- Overload alarm with auto-shutoff prevents wattage overload- Replaceable 40amp fuse protects inverter from overload- Lighted power switch

The PV375USB PowerVerter® Ultra-Compact Car Inverter provides 375 watts of portable power for charging and operating multiple devices in your vehicle. It converts 12V DC power into standard household 110V AC power to run a wide variety of electronics, such as smartphones, laptops, tablets, GPS units, game systems, portable TVs, DVD players and MP3 players, as well as low-power lights, camping accessories, battery rechargers for small battery-operated power tools, and mobile office equipment.This power inverter features dual NEMA 5-15R outlets, a 2.1A USB charging port and a 1.0A USB charging port. Just plug the 12V DC input jack with convenient three-foot cord into the 12V outlet in your vehicle, and the PV375USB is ready to operate. Included three-foot battery cables with alligator clips also allow direct connection to your car battery’s DC terminals.To prevent you from running down your battery, the PV375USB turns off automatically when the input voltage falls to 10V. Likewise, the unit will also shut down if it gets too hot (for instance, because the connected devices exceed 375 watts). A built-in ventilation fan keeps the interior cool during extended use. The durable metal housing is engineered to withstand the rigors of road trips, campouts, business trips and family vacations. No maintenance is required.

All-in-One Charger Adapter Allows You to Charge up to 4 Devices at the Same TimeThis portable charger expansion hub attaches to the 61W or 87W AC wall charger that came with your Apple MacBook Pro to expand the number of charging ports from one to four. A white LED indicates sufficient charging power is available for your devices.Connect Your Devices to a USB-C Port and 3 USB-A Ports for Pure ChargingThe USB-C PD 3.0 port produces a maximum power output up to 20V 2.25A (45W). A USB-A Quick Charge 3.0 port offers charging speeds up to four times faster than conventional USB wall chargers for compatible devices. The remaining two USB-A BC 1.2 ports supply up to 5V 2.4A for charging. All four ports can be utilized simultaneously to keep your MacBook, Chromebook, smartphones and tablets ready to use.Dedicated to Keeping Your Expensive Gadgets SafeThe U280-A04-A3C1 protects your connected devices against overcharging, overheating, overvoltage and short circuits. The unit’s non-slip grip padding provides a secure connection to the power adapter. It is colored white and molded to integrate perfectly with the Apple charger and help you reduce unsightly cable clutter.

"Tripp Lite PV3000GFCI. Output power: 3000 W, Output voltage: 120 V, Country of origin: China. Product color: Black. Width: 10.5"" (266.7 mm), Depth: 13.5"" (342.9 mm), Height: 4"" (101.6 mm). Package width: 4.2"" (106.7 mm), Package depth: 16"" (406.4 mm), Package height: 11.1"" (281.9 mm). Master (outer) case width: 12.7"" (322.6 mm), Master (outer) case length: 16.6"" (421.6 mm), Master (outer) case height: 11.7"" (297.2 mm)"

Medical inverter/charger with IEC 60601-1 powers equipment used in healthcare facilities inside and outside patient care areas.- All-in-one inverter/charger/controller powers equipment on mobile medical carts- IEC 60601-1 compliance for use inside and outside patient care areas- Works with both SLA and LiFePhos batteries to best fit your power requirements- Internal ATS powers connected equipment and recharges battery simultaneously- Free PowerAlert® software protects valuable patient data from loss or corruption- 2-year limited warranty150W 120V Medical-Grade Mobile Power Inverter/Charger for Medical CartsThis cost-effective hospital-cart power inverter/charger for medical equipment integrates seamlessly into your existing system. The HC150SL medical inverter battery charger is the ideal solution for providing safe, compliant power to mobile medical equipment used both inside and outside patient care areas.Medical Inverter Provides IEC 60601-1 Compliance for All Connected Electronic DevicesAn isolation transformer reduces the cumulative shock potential of connected equipment, which helps ensure IEC 60601-1 compliance for use in every sector of healthcare facilities, including patient care areas. This unit is compatible with both sealed lead acid (SLA) and Lithium Ion Phosphate (LiFePhos) batteries, so you can determine which technology best fits your needs. In addition to IEC 60601-1, this module meets NFPA, NEC and JCAHO standards.Smart Charging System for Long Battery LifeThe advanced three-stage charger recharges batteries faster and more safely than conventional chargers. An internal automatic transfer switch (ATS) lets the module power connected equipment while also recharging the battery at the same time. The HC150SL can provide multiple hours of AC power in standard configuration, though runtime varies depending on battery condition and load.Combats Electromagnetic Interference That Can Harm EquipmentVarious electromagnetic and radio sources found in virtually every medical facility can cause disruptive interference on the AC line. Known as EMI (electromagnetic interference) and RFI (radio frequency interference), this line noise is a common cause of performance problems and can lead to incremental hardware damage and data corruption. The HC150SL incorporates technology that filters out disruptive line noise so that it won’t affect your equipment.Superior Design for Simple Fuss-Free UseThe HC150SL’s simple cart and fleet management lets you track usage data at a glance. Tripp Lite’s free downloadable PowerAlert software automatically saves valuable patient data from loss or corruption if the cart is left unattended and battery power is depleted. The included USB cable connects the module to any cart-mounted thin client or laptop computer. An optional remote user interface (RUI; sold separately) displays output and battery status and includes on/off and alarm-mute switches.Rugged Construction Sure to Stand Up to Demanding EnvironmentsThe compact steel housing features a USB communication port and one C13 AC outlet on a six-inch dongle for connecting a device’s power cord. It is designed to endure in severe medical environments where reliable power is essential.