Showing 30–40 of 46 results

- 12V DC or 120V AC input; 120V AC output (hardwired)- 1250 watts continuous and 2500 watts DoubleBoost inverter output- 3 stage, 14/55 amp selectable wet/dry cell battery charger- Built-in Isobar® premium AC surge protection and Auto Transfer Switching option for battery backup / UPS operation- Tested to power inverter standards UL458 (USA) and CSA (Canada)- High reliability large-transformer design with protected DC and AC wiring terminals

Tripp Lite's RV3012OEM Inverter/Charger is the quiet alternative to gas generators with no fumes, fuel or noise to deal with! It provides equipment with utility- or generator-supplied AC electricity filtered through premium ISOBAR surge protection. This DC-to-AC inverter with automatic line-to-battery transfer and integrated charging system serves as an extended run UPS, a standalone power source or an automotive inverter suitable for rugged RV applications. Supplies up to 3000 watts of continuous 120V AC power from any 12V DC battery or automotive DC source. OverPower TM inverter output feature temporarily provides up to 150% of the continuous output for 1-60 minutes and DoubleBoost TM inverter output feature delivers up to 200% of the continuous output for up to 10 seconds, providing the extra power needed to cold start heavy-duty tools and motorized equipment. When hardwire AC input is energized, commercial power passes through to connected equipment and the battery set is recharged via 3 stage, selectable 35/140 amp charging system. Includes optional dual-circuit hardwire AC input to enable full charger output from circuit 1 with a 120V 20A input and full AC pass-through from circuit 2 with a second 120V 20A input feed. In UPS mode, the APS system responds to blackouts and voltage fluctuations with a near instantaneous automatic transfer to battery-derived AC output. Includes a set of high current DC input terminals for simple installation (user supplies batteries and cabling - see owner's manual for recommendations). Passes sine wave utility or generator power during battery charging and UPS line power operation, plus efficient PWM sine wave AC output in inverter and UPS backup modes. Reliable large transformer design, with frequency control powers resistive electronic loads or large inductive motors, compressors and other items with high current needs on startup. Optional APSRM4 wired remote power switch with full status LEDs provides remote power inverter on/off switching and continuous status information (APSRM4 sold separately). Supports an unlimited amount of runtime with any number of user-supplied batteries connected. Highly adaptable to a variety of applications and site conditions with adjustable charger settings for wet/gel battery types and selectable line to battery power transfer voltages.

- 12V DC or 120V AC input; 120V AC output; 2 outlets.- 750 watts continuous, 1125 watts OverPower™ and 1500 watts DoubleBoost inverter output.- 3 stage, 20 amp selectable wet/dry cell battery charger.- Auto Transfer Switching option for battery backup / UPS operation.- Reliability enhanced large-transformer design with protected DC wiring terminals.

The APSX3024SW 3000W APS X Series 24V DC 230V AC Inverter/Charger is a reliable power source for a wide variety of power tools, computers, audio/video components and other sensitive electronics at mobile, emergency and remote sites. With no fumes, fuel or excess noise, it’s an excellent alternative to generator power.The DC-to-AC pure sine-wave inverter delivers network-grade power to sensitive electronics. Its automatic line-to-battery transfer switch and integrated charging system allow the unit to work as a vehicle inverter, standalone AC power source or extended-run UPS. It delivers 3000W of continuous power, 4500W up to one minute or 6000W of peak power up to 10 seconds during equipment startup or cycling. An automatic overload detector, cooling fan and resettable AC circuit breakers protect the unit from damage.Designed for easy installation in RVs, commercial and fleet vehicles and emergency vehicles, the APSX3024SW converts stored power from any 24V battery or automotive DC source to safe, stable, computer-grade AC power for unlimited runtime. When hardwired to an external 230V AC source, the unit keeps the user-supplied battery charged via a three-stage 23/90A selectable charging system while simultaneously delivering AC power to connected equipment.When used as a UPS, the APSX3024SW responds to blackouts and brownouts with an automatic, instantaneous transfer to battery-derived AC output. LEDs on the unit indicate load percentage and battery charge level.

The APSX750 750W APS X Series 12V DC 230V AC Inverter/Charger is a reliable power source for a wide variety of equipment ranging from power tools and portable lighting to laptop computers and sensitive monitoring equipment. With no fumes, fuel or excess noise, it’s an excellent alternative to generator power.The DC-to-AC inverter features an automatic line-to-battery transfer switch and integrated charging system that allow it to work as a vehicle inverter, standalone AC power source or extended-run UPS. It delivers 750W of continuous power, 1125W up to one hour, or 1500W of peak power up to 10 seconds during equipment startup or cycling. An automatic overload detector, cooling fan and resettable AC circuit breakers protect the unit from damage.Designed for easy installation in RVs, over-the-road trucks, fleet vehicles and conversion vans, the APSX750 converts stored power from any 12V battery or automotive DC source to safe, stable, computer-grade AC power for unlimited runtime. When hardwired to an external 230V AC source, the unit keeps the user-supplied battery charged via a three-stage 5/20A selectable charging system while simultaneously delivering AC power to connected equipment.When used as a UPS, the APSX750 responds to blackouts and brownouts with an automatic, instantaneous transfer to battery-derived AC output. LEDs on the unit indicate load percentage and battery charge level.

"Tripp Lite's EMS1250UL inverter with integrated charging system provides automatic, uninterruptible DC-to-AC power for critical on-board equipment. Ideal for installation by ambulance/EMS vehicle manufacturers, dealer or EMS service for OEM, replacements and upgrades. Supplies up to 1250 watts of continuous 120V AC power to 2 AC outlets from any 12V battery or automotive DC source. When AC cable is connected to a shore power source, commercial power passes through to connected equipment and the battery set is recharged via 3 stage, 14/55 amp selectable charging system. This unit can also function as a UPS system, responding to blackouts and voltage fluctuations with a near instantaneous automatic transfer to battery-derived AC output. Convenient Anderson DC input quick connector on the unit with extra Anderson DC input connector included in the box (user supplies batteries and cabling). Reliable large transformer design with efficient PWM sine wave output and frequency control powers resistive electronic loads or large inductive motors, compressors and other items with high current needs on startup. Included APSRM4 wired remote power switch with full status LEDs provides remote power inverter on/off switching and continuous status information (APSRM4 included). Supports an unlimited amount of runtime with any number of user-supplied batteries connected. Highly adaptable to a variety of applications and site conditions with adjustable charger settings for wet/gel battery types and selectable line to battery power transfer voltages. Includes AC input surge suppression. Includes hospital grade plug and outlets with GFI (ground fault interrupter) protection. TUV tested to UL458 (mobile inverter) and CAN/CSA-C22.2 No. 107.1-01. Meets GSA ambulance specification KKK-A-1822. NOTE: To protect against high current draw that may occur during inverter failure, a fuse link rated at 200a should be positioned no more than 18"" from the EMS1250UL's battery in the positive line.- EMS1250UL serves as an automotive or stationary DC-to-AC inverter with automatic line-to-battery transfer and integrated battery charger- Supports 120V AC output from a 120V AC line power source or 12V DC battery source- 16.6 millisecond automatic transfer between line and battery power supports UPS protection during blackouts and voltage fluctuations for equipment compatible with a one cycle transfer time- 1250 watts continuous AC output in inverter mode, 1440 watts continuous AC output in AC mode- Double Boost™ inverter output supports momentary startup loads up to 200% of the continuous rating for up to 10 seconds- OverPower™ inverter output supports longer duration overloads to 150% for 1-60 minutes under ideal battery and temperature conditions. (For best results, utilize OverPower usage for as short of a duration as possible, ensure battery bank and cabling is able to provide full nominal DC voltage under load and allow inverter/charger to fully cool before and after OverPower usage.)- 3 stage, selectable 14/55 amp battery charger with adjustable settings for wet/gel battery types offers fast, reliable battery recharging- Anderson quick connect DC wiring terminals safely accept input from attached battery bank- Protected hardwire output passes 120V line power or inverter output through to connected equipment- Reliability enhanced large-transformer design tested to UL (USA) and CSA (Canada) standards- Moisture-resistant construction enables vehicular or marine operation in high humidity environments- 3 position operating mode switch supports ""AUTO"" mode to enable automatic transfer between DC and AC modes, CHARGE-ONLY to maintain a full battery charge when AC is present without auto transfer and SYSTEM OFF settings- Set of six front panel LEDs display AC/DC operational modes, overload status, DC voltage level, shutdown status and system fault status- Set of 4 configuration dipswitches support wet/gel battery charging profiles, adjustable 135/145V high voltage auto transfer during overvoltages and selectable 75/85/95/105V AC low voltage auto transfer during brownouts- Set of 4 additional configuration dipswitches support 4 levels of charger limiting relative to output load size, a battery equalization program and battery charger low/high/off settings- Resettable 12A charger AC input breaker and resettable 12A AC output breaker and automatic 2 speed cooling fan protect the inverter from load and temperature related failures- Grounding lug properly connects the inverter/charger system to earth ground or vehicle grounding system- Automatic overload and thermal shutoff safely turns off inverter as excessive loads or overheating conditions develop- Front panel remote control connector enables remote off/on switching (APSRM4 remote control switch with status LED display and 50 ft cable included). APSRM4 accessory also includes user configurable jacks to support inverter shutoff or startup as a vehicle ignition is engaged- Load sensing control dial enables adjustable load threshold required to automatically turn the inverter on and off in DC mode as load conditions changePackage Includes- EMS1250UL Inverter/Charger- Instruction manual with warranty information- Wired Remote Switch with full LED status indicators (model APSRM4)- 2 Anderson DC connectors (1 on the unit and 1 included in the box)- RoHS compliant"

"Tripp Lite PV2400FC. Input voltage: 24 V, Output power: 2400 W, Output voltage: 120 V. Product color: Black. Width: 8.5"" (215.9 mm), Depth: 16.3"" (412.8 mm), Height: 7.25"" (184.2 mm). Package width: 14.4"" (365.8 mm), Package depth: 21.3"" (541 mm), Package height: 12.9"" (327.7 mm). Master (outer) case width: 14.4"" (365.8 mm), Master (outer) case length: 21.3"" (541 mm), Master (outer) case height: 12.9"" (327.7 mm)"

- 12V DC input; 120V AC output; 2 outlet.- 1250 watts continuous output.- Peak surge output: OverPower (up to 1 hour) - 1875 watts, Double-Boost (up to 10 seconds) - 2500 watts.- High efficiency power conversion.- Automatic overload protection.

"Tripp Lite APS2012. Output power: 2000 W, Output voltage: 120 V, Output current: 25 A. Product color: Black. Width: 8.5"" (215.9 mm), Depth: 16.3"" (412.8 mm), Height: 7.25"" (184.2 mm). Package width: 14.4"" (365.8 mm), Package depth: 21.1"" (535.9 mm), Package height: 12.8"" (325.1 mm). Master (outer) case width: 14.4"" (365.8 mm), Master (outer) case length: 21.1"" (535.9 mm), Master (outer) case height: 12.8"" (325.1 mm)"

"Tripp Lite APS2448UL. Output power: 2400 W, Output voltage: 120 V, Country of origin: China. Product color: Black. Width: 8.5"" (215.9 mm), Depth: 16.7"" (425.4 mm), Height: 7.25"" (184.2 mm). Package width: 21.1"" (535.9 mm), Package depth: 14.5"" (368.3 mm), Package height: 12.9"" (327.7 mm). Master (outer) case width: 21.1"" (535.9 mm), Master (outer) case length: 14.5"" (368.3 mm), Master (outer) case height: 12.9"" (327.7 mm)"