Showing 1310–1320 of 2623 results

Strengthen your high-speed network with the N235-001-SH-6AD Cat6a Straight-Through Modular Shielded In-Line Snap-In Coupler (F/F). It connects two Cat6a patch cords to create one longer cable. Its keystone design is perfect for convenient feed-through patching when used with a standard data wallplate (such as N042-001-WH). One RJ45 port is angled down at a 90-degree angle for easy installation in hard-to-reach spaces. Built for ultra-fast performance, this is an ideal coupler when setting up premise wiring, telecommunications, data networking and Ethernet connections.Compatible with all Cat6a cables, the N235-001-SH-6AD’s protective metal housing is fully shielded to reduce EMI/RFI interference that can damage or degrade data. This coupler features straight-through wiring and 50-µin gold-plated contacts designed to resist corrosion. The N235-001-SH-6AD is UL-listed and meets all requirements for EIA/TIA Category 6A compliance. It’s also backward compatible with Cat6, Cat5e and Cat5 LANs.

Combines 6 Certified Cat6a Cables in One Bundle100% terminated, bundled and tested at the factoryIdeal for data centers and other areas where quick installation and consistent network connection are importantDesigned for easy connection in switches and patch panelsSaves time, space and labor costsTop-of-the-Line ConstructionUnshielded female RJ45 keystone jackMale RJ45 plug with gold-plated 50µ contacts23 AWG solid conductor wireBlue CMR-rated PVC jacketBlack mesh tubing keeps cables neat18 in. breakout legs labeled on ends for quick IDFully Compliant and CompatibleMeets or exceeds ANSI/TIA-568-C.2 category requirements for performanceBackward compatible with Cat6 and Cat5e installations

The N261-010-6FF-BL Augmented Cat6/Cat6a Pre-Terminated Copper Trunk Bundle (F/F) makes installation a breeze and saves you time, space and money. All termination, bundling and testing is done at the factory, so almost anyone can do the installation in your data center in less time. Six certified and channel-tested Cat6a cables are bundled together, which cuts down on cable clutter in your cabinet. Both ends feature an unshielded female RJ45 keystone jack.Designed for easy patching in switches and patch panels, this 10-ft. (3.05 m) assembly is constructed using 23 AWG solid conductor wire with a blue CMR-rated PVC jacket. Black mesh tubing keeps the cable neat and protects against fraying and damage. The 18-inch breakout legs are labeled on the ends for quick identification. System components meet or exceed ANSI/TIA-568-C.2 category requirements for performance. Backward compatible with Cat6 and Cat5e installations.

This N261-010-AQ Aqua Augmented Cat6 (Cat6a) Unshielded (UTP) Snagless Ethernet cable allows 10 Gbps data transmission over 4-pair copper. Each Cat6a cable is individually tested and certified on Fluke test equipment. Snag-free strain relief boot provides the most secure and accurate connections.

This N262-001-BL Blue Augmented Cat6 (Cat6a) Shielded (STP) Snagless Ethernet cable allows 10 Gbps data transmission over 4-pair copper. Each Cat6a cable is individually tested and certified on Fluke test equipment. Snag-free strain relief boot provides the most secure and accurate connections.

This N262-003-BL Blue Augmented Cat6 (Cat6a) Shielded (STP) Snagless Ethernet cable allows 10 Gbps data transmission over 4-pair copper. Each Cat6a cable is individually tested and certified on Fluke test equipment. Snag-free strain relief boot provides the most secure and accurate connections.

These T1, RJ45-RJ45 ( RJ48C ) cross-over Ethernet cables are constructed with premium Quabbin 9720, T1 certified cable. Two individually shielded, 22 AWG, 100 ohm pairs maximize the performance of your expensive T1 circuits and equipment. Beware of generic T1 Ethernet cables made with inexpensive Cat5 unshielded Ethernet cable. The American National Standards Institute (ANSI) states in ANSI T1.403 that T1 cable be constructed of two balanced pairs, 22 AWG Solid conductor, 100 ohm impedance, with a loss budget of 5.5 db. Cross-over wiring configuration available in 3-foot (0.9-meter), 5-foot (1.5-meter), 7-foot (2.1-meter) and 10-foot (3.1-meter) lengths. Custom lengths available. Consult your reseller. Also available in straight-through wiring configuration. See N265-Series T1 Ethernet cables.

1 m. (3 ft.) Green 30Awg SFP+ High Speed Passive Copper 10Gbps CableFully compliant to MSA SFF-8431 specificationEquivalent to Cisco SFP-H10GB-CU1M (See the Support tab on this web page for additional cross references)Use in 10Gbps Ethernet and Fibre Channel applications100ohm Twinaxial cable, Diecast metal shells, pull-to-release latchingSupport for 1x, 2x, 4x and 8x Fiber Channel data ratesHot-Pluggable SFP 20PIN footprintLow power consumption

5M (16.4-ft.) Black 24Awg SFP+ High Speed Passive Copper 10Gbps CableFully compliant to MSA SFF-8431 specificationEquivalent to Cisco SFP-H10GB-CU5M (See the Support tab on this web page for additional cross references)Use in 10Gbps Ethernet and Fibre Channel applications100ohm Twinaxial cable, Diecast metal shells, pull-to-release latchingSupport for 1x, 2x, 4x and 8x Fiber Channel data ratesHot-Pluggable SFP 20PIN footprintLow power consumption

20-in. (50.8 cm) 30 AWG SFP+ high-speed passive copper cable is fully compliant to MSA SFF-8431 specificationSupports 1x, 2x, 4x and 8x Fiber Channel data ratesLow-power equivalence to Cisco SFP-H10GB-CU1-5MIdeal for 10G Ethernet and Fibre Channel applications100-ohm twinaxial cable with die-cast metal shells and pull-tab latches