Showing 1430–1440 of 2623 results

10-ft. (3.05 m) Blue Cat6, Right Angle to Straight RJ45 - RJ45 Patch cablePVC 4 Pair Stranded Conductors, 24AWGFully Molded EndsETL Verified to TIA/EIA -568-B550Mhz Gigabit Speed Rated

This Gray Cat6 crossover molded cable has two standard RJ45 molded male connectors featuring integral strain relief. The cable is designed to connect hub-to-hub, PC-to-PC or Mac-to-Mac and is perfect in conjunction with 10/100/1000Base-T networks. Molded connectors are a different color to help identify this cable as a crossover cable and not a standard Ethernet cable. Manufactured from PVC 4-pair stranded UTP and rated for 550 MHz/1 Gbps communication. Snagless Cat6 cables are also available. Meets most current industry standards, including IEEE 802.3ab, IEEE 802.5, ANSI/EIA/TIA 568, ISO/IEC 11801 and ETL.

Designed for premise (in-wall) cabling applications in air ducts and drop ceilingsPremium cabling for category 6, category 5e and category 5 applicationsColor: Gray / Length: 1000-ft.24 AWG 4-pair solid cable with Gray Plenum ( CMP ) jacketDeliver stable performance up to 550MHz/ 1 Gbps communicationMeets most current industry standards including IEEE 802.3ab, IEEE 802.5, ANSI/EIA/TIA 568, ISO/IEC 11801 and ETL (category 6 draft 11)Available in PVC cable as well (N222-01K-GY and N222-01K-BL)Compliant with the Federal Trade Agreements Act (TAA) for GSA Schedule purchases

Use this Cat6 Straight-Through Shielded Coupler to extend the length of Cat6 shielded Ethernet cables or use in standard data wall plates to provide feed-through patching. Keystone design allows the coupler to be used as a stand-alone unit, mounted in a face plate or blank keystone-type patch panel. Meets EIA/TIA Cat6 specifications. Compliant with the Federal Trade Agreements Act (TAA) for GSA Schedule purchases.

Strengthen your high-speed network with the N235-001-SH-D Cat6 Straight-Through Modular Shielded In-Line Snap-In Coupler (F/F). It connects two Cat6 patch cords to create one longer cable. Its keystone design is perfect for convenient feed-through patching when used with a standard data wallplate (such as N042-001-WH). One RJ45 port is angled down at a 90-degree angle for easy installation in hard-to-reach spaces. Built for ultra-fast performance, this is an ideal coupler when setting up premise wiring, telecommunications, data networking and Ethernet connections.Compatible with all Cat6 cables, the N235-001-SH-D’s protective metal housing is fully shielded to reduce EMI/RFI interference that can damage or degrade data. This coupler features straight-through wiring and 50-µin gold-plated contacts designed to resist corrosion. The N235-001-SH-D is UL-listed and meets all requirements for EIA/TIA Category 6 compliance. It’s also backward compatible with Cat5e and Cat5 LANs.

These T1, RJ45-RJ45 ( RJ48C ) cross-over Ethernet cables are constructed with premium Quabbin 9720, T1 certified cable. Two individually shielded, 22 AWG, 100 ohm pairs maximize the performance of your expensive T1 circuits and equipment. Beware of generic T1 Ethernet cables made with inexpensive Cat5 unshielded Ethernet cable. The American National Standards Institute (ANSI) states in ANSI T1.403 that T1 cable be constructed of two balanced pairs, 22 AWG Solid conductor, 100 ohm impedance, with a loss budget of 5.5 db. Cross-over wiring configuration available in 3-foot (0.9-meter), 5-foot (1.5-meter), 7-foot (2.1-meter) and 10-foot (3.1-meter) lengths. Custom lengths available. Consult your reseller. Also available in straight-through wiring configuration. See N265-Series T1 Ethernet cables.

These T1, RJ45-RJ45 ( RJ48C ) cross-over Ethernet cables are constructed with premium Quabbin 9720, T1 certified cable. Two individually shielded, 22 AWG, 100 ohm pairs maximize the performance of your expensive T1 circuits and equipment. Beware of generic T1 Ethernet cables made with inexpensive Cat5 unshielded Ethernet cable. The American National Standards Institute (ANSI) states in ANSI T1.403 that T1 cable be constructed of two balanced pairs, 22 AWG Solid conductor, 100 ohm impedance, with a loss budget of 5.5 db. Cross-over wiring configuration available in 3-foot (0.9-meter), 5-foot (1.5-meter), 7-foot (2.1-meter) and 10-foot (3.1-meter) lengths. Custom lengths available. Consult your reseller. Also available in straight-through wiring configuration. See N265-Series T1 Ethernet cables.

Splits a 40 GbE Network System to Four 10 GbE Servers, Switches and/or AdaptersIdeal for data centers, high-end servers and enterprise wiring closetsLower port cost and power budget when compared to fiber opticsMulti-platform support for 40GBASE-CR4, 10GBASE-CR4, 6G SAS, Fibre Channel and SONETTop-of-the-Line ConstructionZinc die-cast male connectors for superior EMI resistanceErgonomic pull-tab ejectors for quick, easy connections8-pair wire technology optimized for bandwidth-intense applicationsFlexible 30 AWG conductors maintain smooth high-frequency responseFully Compliant and CompatibleCompatible with SDR, DDR and QDRCompatible with all QSFP and QSRP+ portsComplies with latest MSA (Multi-Source Agreement) SFF-8431 and SFF-8436 architectureCompatible to Cisco QSFP-4SFP10G-CU1M

Connect Network Equipment at Speeds Up to 100 GbpsCombines four 28 Gbps SFP channels into single high-density cableIdeal for data centers, high-end servers and enterprise wiring closetsMulti-platform support for 128G Fibre Channel and EDR InfiniBandLower port cost and power budget when compared to fiber opticsTop-of-the-Line Construction100 GbE 38-position “board-as-connector” designZinc die-cast male QSFP+ connectors for superior EMI resistanceErgonomic pull-tab ejectors for quick, easy connections8-pair wire technology optimized for bandwidth-intense applicationsFlexible 26 AWG conductors maintain smooth high-frequency responseFully Compliant and CompatibleMeets or exceeds strict 100-Gigabit Ethernet (100GBASE-CR4) standardsComplies with IEEE 802.3bj and RoHSComplies with latest QSFP28 MSA (Multi-Source Agreement) SFF-8665 architectureCompatible with all QSFP and QSRP+ portsCompatible to Cisco QSFP-100G-CU2M

Manufactured from 62.5/125 duplex (zipcord) fiberPVC jacketLength: 5 m (16.4-ft.) - Connectors: 2 ST to 2 SC connectorsInsertion loss testing performed on every connector (0.2db typical) and provided with cableBeveled edge on ends of glass makes insertion of plug a breezeFiber made from glass (not a polymer)Color coded shrouds identify transmit and receiveDuplex multimode fiber is most commonly used in LAN applications where links are typically 10-ft. (3.05 m) or lessFiber optic distributed data interface (FDDI) ratedOFNR (riser rated)