Showing 580–590 of 1189 results

"The RAM-VP-SW1-4 consists of a 4"" upper male Tele-Pole, double swing arm and 2.5"" round base that contains the universal AMPs hole pattern. The Tele-Pole can be easily adjusted by turning the knob at the top of the post. Once the knob has been tightened, the Tele-Pole becomes a rigid support for connecting devices or cradles. The Tele-Pole will connect to any RAM vehicle base with a welded female Tele-Pole. The double swing arm with rotating plate, allows you to twist and tilt the viewing angle of your connected electronic device, when mounted on your RAM Vehicle Mount. The rotating swivel arm gives you even more viewing positions for your mounted electronic device while holding everything firmly in place. The length of the double swing arm is 12""."

"The RAM-VPR-107-1 uses a unique spring loaded mechanism that holds strong, yet provides easy removal for printer storage. At each end of the spring loaded cradle are small side clamp plates that are designed to fit cleanly around either edge of the printer. Included is a standard length arm and round pipe base, which will connect to any RAM® Tele-Pole™ and other poles with a diameter from 1.25"" to 1.5"". Hardware Included: - (2) 1/4""-20 U-Bolts for 1.25"" - 1.5"" Rails - (4) 1/4""-20 Nylock Nuts - (4) Rubber Caps"

"The RAM Quick Draw Jr. holder uses a unique patent pending spring loaded mechanism that holds strong, yet provides easy removal for printer storage. At each end of the cradles are side clamping plates that are designed to fit cleanly around the edges of a printer. Clamping Dimensions: Width: Min 6.625"" to Max 10.5 Height: Max 2.5"" Compatible Devices: Brother - MW-100 Brother - MW-120 Brother - MW-140 Brother - MW-260 Zebra - QL 220 Zebra - QL 320 Zebra - QL 420 Plus Zebra - RP4T Printronix - M4L"

"The RAM-VPR-103-1 uses a unique spring loaded mechanism that holds strong, yet provides easy removal for printer storage. At each end of the spring loaded cradle are small side clamp plates that are designed to fit cleanly around either edge of the printer. Included is a standard length arm and round pipe base, which will connect to any RAM Tele-Pole and other poles with a diameter from 1.25"" to 1.88"". Patent Pending Compatible Devices HP DeskJet 450 HP DeskJet 460 HP DeskJet 470 HP OfficeJet 100 HP OfficeJet 250 Cradle Clamping Dimensions: Width: Min 9"" to Max 15.5"" Height: Max 2.5"" Cradle Dimensions: (13.3W x 6.5D x 3.2H) U-Bolt Dimensions: 0.75"" to 1.88"" in diameter"

The RAM-VPR-101 is designed to hold Brother PocketJet Series portable printers. A custom fit enclosure, the cradle is form fitting with no sharp edges and adds little to the overall size of the printer. Key features are full view of LED's, sight hole to check paper level, and a caddy to store pens, cell phone, paper clips, glasses and other useful items. Complete kits are available as stand alone systems or integrate one with your existing RAM products.

The perfect compliment to the popular No-Drill line of products is our new adjustable leg. Very easy to install, this versatile accessory can be used as a No-Drill or a bolt down option. If the mounted device is heavier than normal, this stabilizer is a simple solution to add rigidity to your laptop mounting system.

This locking, spring-loaded cradle with stylus holder allows you to secure your Zebra TC70, TC72, TC75, or TC77 with or without the Zebra Handstrap accessory. To lock, simply insert the device and push the button. The cradle is compatible with RAM two-hole AMPS pattern diamond bases that will connect to B and C size ball mounts, allowing for a wide variety of mounting options (hardware included). For charging capabilities, this cradle is compatible with the RAM-GDS-CHARGE-V7B1U for hardwire applications or the RAM-POW-CIG-M55 cigarette charger.

"Available in lengths ranging from 4"" to 30"", the RAM Hand-Track is an ideal track and handrail solution for ATVs, boats, kayaks and more. Compatible with all RAM track mounts, the Hand-Track includes two top-loading end caps for attaching to a flat surface. To combine multiple tracks, pair with any top-loading Hand-Track Extension with Center Connector. Dimensions: Overall height: 2.5"" Overall length: 24"" Track length: 18"""

RAM Mounts RAM-TRACK-EXA-5U mounting kit

"This No-Drill Laptop Stand System installs quickly and easily into the specified vehicles using the existing hardware of the passenger side seat rails. This configuration provides a telescoping feature that ranges from 12 to 18 inches. Dual swing arms provide articulation and 12 inches of reach for passenger and driver access to the mounted device. Patented rubber ball and socket joint provides additional adjustment as well as shock and vibration isolation. The RAM Tough-Tray is spring loaded to accommodate 10"" to 16"" wide laptops & (17"" wide screens) . The tray features four adjustable retaining arms with rubber grip feature. These arms can be moved both vertically and horizontally. This allows for a custom fit for varying thicknesses of laptops and the freedom of not blocking ports or drives. A screen support and USB light are also available to accessorize the tray. Hole patterns on perimeter of tray facilitate the mounting of additional RAM systems to support GPS or other electronics."