Showing 570–580 of 1189 results

"The RAM-HOL-TABL3U consists of a spring loaded back plate, custom support cups and locking mechanism. This spring loaded design makes it easy to load and unload your iPad, along with keeping it secure while on the go. Cup ends are designed to optimize the functionality of your iPad, allowing access to audio jacks, usb, power, and other ports, your iPad can be used just as it was intended. Quickly lock the cradle, keeping your iPad secure and safe from theft. The included backplate is interchangeable with various size support cups, making it compatible with numerous tablet models. New detachable support cups are the only components needed for purchase, attach to the backplate for support of your new tablet. Included is a set of four nuts and bolts to connect the cradle to any RAM components or mounts that contain the universal AMPs hole pattern. The included back plate is interchangeable with various size support cups, making it compatible with numerous tablet models. New detachable support cups are the only components needed for purchase, attach to the back plate for support of your new tablet. The Tab-Lock cradle is compatible with any tablet that will fit the dimensions listed below. It is important to verify the dimensions of your tablet when determining the overall size. Cradle Dimensions: Height: 8.25"" to 9.875"" Width: 6.38"" to 7.75"" Depth: 0.13"" to 0.56"" Note: Product consists of holder only. Case not included."

Easily dock and remove your GDS® Keyboard™ with the spring-loaded RAM® Tab-Lock™ holder. Secured by the in-vehicle mounting bracket, simply dock your GDS® Keyboard™ by placing within the RAM® Tab-Lock™ end cups. With the keyed lock, prevent theft and keep your keyboard locked into place.

The RAM Side Arm Support Accessory attaches to the Tab-Lock and locking GDS vehicle docks and supports a tablet when in landscape mode. Utilize your tablet in any scenario in order to extend its functionality and ensure you can customize the ergonomics.

Included is a set of four nuts and bolts to connect the cradle to any RAM components or mounts that contain the universal AMPs hole pattern.

Now that you've got the right tablet for the job, you are going to need the right mounting system. Get the most out of your tablet with the Universal RAM Tab-Tite cradle. With 3 sets of interchangeable end cups, ranging from different sizes and features, you can fit the cradle to your tablet for a near custom fit. This spring loaded design makes it easy to load and unload your tablet, along with keeping it secure while on the go. The end cups are designed to optimize the functionality of your tablet, allowing access to audio jacks, usb, power, and other ports. Perfect for stationary or on the go applications, this new RAM product is just what you need to get the most out of your mobile device. Included is a set of four nuts and bolts to connect the cradle to any RAM components or mounts that contain the universal AMPs hole pattern. For off-road environments and extreme use, we recommended the use of a tether to assist in retaining your device. The Tab-Tite cradle is compatible with any tablet that will fit the dimensions listed below. It is important to verify the dimensions of your tablet when determining the overall size.

"Featuring GDS® Technology™ for data and charging capabilities, the GDS® Vehicle Dock for Zebra ET5x 8.3"" & 8.4"" series tablets allows you to connect a desired peripheral while keeping the device charged through the pogo pin contacts when the device is docked. Power is provided by connecting to the dock's 5.5mm DC power jack, while peripheral support is provided by the built-in USB Type A cable and DB9 male connector. The dock also allows the tablets scanning function to work through the cutout on the back which also accommodates tablet add-ons such as scanner, hand strap, keyboard, mouse, joystick and PowerPack battery. This vehicle dock is compatible with C and D size RAM® 4-hole AMPS and 75mm x 75mm VESA pattern bases for attaching a double socket arm in order to complete your mounting solution. Take the solution a step further by taking advantage of the built-in 2-hole mounting plate compatible with RAM® 2-hole diamond base for additional device mounting such as a phone, or other handheld device. An included optional accessory bracket will allow you to connect RAM® 2-hole diamond bases for device mounting and features a cable management system."

"Featuring GDS® Technology™ for data and charging capabilities and a key lock for theft deterrence, the GDS® Vehicle Dock for Zebra ET5x 8.3"" & 8.4"" series tablets allows you to connect a desired peripheral while keeping the device charged through the pogo pin contacts when the device is docked. Power is provided by connecting to the dock's 5.5mm DC power jack, while peripheral support is provided by the built-in USB Type A cable and DB9 male connector. The dock also allows the tablets scanning function to work through the cutout on the back which also accommodates tablet add-ons such as scanner, hand strap, keyboard, mouse, joystick and PowerPack battery. This vehicle dock is compatible with C and D size RAM® 4-hole AMPS and 75mm x 75mm VESA pattern bases for attaching a double socket arm in order to complete your mounting solution. Take the solution a step further by taking advantage of the built-in 2-hole mounting plate compatible with RAM® 2-hole diamond base for additional device mounting such as a phone, or other handheld device. An included optional accessory bracket will allow you to connect RAM® 2-hole diamond bases for device mounting and features a cable management system."

The RAM-VPR-101 is designed to hold Brother PocketJet Series portable printers. A custom fit enclosure, the cradle is form fitting with no sharp edges and adds little to the overall size of the printer. Key features are full view of LED's, sight hole to check paper level, and a caddy to store pens, cell phone, paper clips, glasses and other useful items. Complete kits are available as stand alone systems or integrate one with your existing RAM products.

"The RAM Quick Draw Jr. holder uses a unique patent pending spring loaded mechanism that holds strong, yet provides easy removal for printer storage. At each end of the cradles are side clamping plates that are designed to fit cleanly around the edges of a printer. Clamping Dimensions: Width: Min 6.625"" to Max 10.5 Height: Max 2.5"" Compatible Devices: Brother - MW-100 Brother - MW-120 Brother - MW-140 Brother - MW-260 Zebra - QL 220 Zebra - QL 320 Zebra - QL 420 Plus Zebra - RP4T Printronix - M4L"

"The RAM-VPR-103-1 uses a unique spring loaded mechanism that holds strong, yet provides easy removal for printer storage. At each end of the spring loaded cradle are small side clamp plates that are designed to fit cleanly around either edge of the printer. Included is a standard length arm and round pipe base, which will connect to any RAM Tele-Pole and other poles with a diameter from 1.25"" to 1.88"". Patent Pending Compatible Devices HP DeskJet 450 HP DeskJet 460 HP DeskJet 470 HP OfficeJet 100 HP OfficeJet 250 Cradle Clamping Dimensions: Width: Min 9"" to Max 15.5"" Height: Max 2.5"" Cradle Dimensions: (13.3W x 6.5D x 3.2H) U-Bolt Dimensions: 0.75"" to 1.88"" in diameter"