Showing 190–200 of 594 results

"The RAM-B-108BU consists of a 1"" diameter rubber ball connected at a right angle to a v-shaped base. The RAM-B-108BU accommodates rails from 1.0"" to a maximum of 2.1"" in diameter. To mount the RAM-B-108BU base, place the saddle shaped plate on the rail then wrap the metal clamp strap around the rail and plate. Tighten the screw knob on the metal strap with a screw driver until the strap has a firm hold on the rail. The RAM-B-108BU is an alternative mounting base for Beechcraft airplanes with a ""throw over yoke""."

With the Garmin spine mount adapter, make any Garmin handheld device featuring an integrated spine connection RAM Compatible. This spine mount adapter easily clips into the integrated spine connection on a wide variety of Garmin devices. For use in nearly any application, the included B size diamond base adapter and hardware allows you to connect your Garmin handheld to any RAM B size mounting base.

"The RAM-B-166-202U consists of a 3.3"" suction cup twist lock base, STANDARD length double socket arm and round base adapter that contains the universal AMPs hole pattern. The mount is designed with a RAM 1"" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm; this allowing for almost infinite adjustment and perfect viewing angles. The suction cup base is designed to have a strong hold on glass and non-porous plastic surfaces, including RAM adhesive disks. The hole pattern found on the round base adapter will connect to most RAM cradles and 3rd party cradles."

RAM Mounts RAM-202-153-202U mounting kit

"The RAM-B-231U consists of a 1"" rubber ball designed to sit at right angles to the mounting rail. The rust proof metal u-bolt accommodates rails in diameter from 0.5"" to 1"" in diameter. Included are black cover caps to be placed over the exposed ends of the u-bolt and a composite adapter that can narrow the rail to a minimum width of 0.5""."

"The RAM-B-316-1U consists of the RAM POD I universal No-Drill vehicle base, 18"" rigid aluminum rod and single 1"" ball socket arm. The base of the mount connects to your seat rail without any drilling necessary. The 18"" rigid aluminum rod can be bent to position your device to its optimum viewing location."

"The RAP-B-379U-252025 consists of a 1"" diameter rubber ball, connected to a 1/4""-20 X .25"" male threaded post. The male thread matches most standard camera and camcorder female threads found on the bottom of the camera. U.S. Standard Thread Diameter and Pitch Option: 1/4""-20 X .25"""

Have an M8 by 25, 30, or 35mm handlebar bolt? The RAM-B-367U will replace that bolt with a standard ball-mount to put just about anything there! This part is compatible with any motorcycle which employs an 8mm bolt or smaller on its structure. A smaller bolt can be used, though the load capacity decreases with the bolt size.

RAM Mounts RAP-B-200-2U mounting kit

"The RAM-B-348U includes a 1/4""-20 female thread connected to a 1"" rubber ball."