Showing 0–10 of 22 results

Wall mount box for keystone jacks Keystone Jack Wall Mount Boxes from Cables To Go are perfect for surface mount applications, especially in confined spaces. They are available in one and two module versions and can be mounted for either side or base entry of cables. Boxes come with mounting screws and adhesive tape, and a cable tie for strain relief. The snap-on cover allows for easy closure or access for quick installation. The box will accommodate Cables To Go's keystone jacks or inserts. Each box includes a write-on label with holder for easy designation of different system or station.

110/KRONE IDC punchdown; T568A/B Cat5e Surface Mount Boxes from Cables To Go are perfect for surface mount applications, especially in confined spaces. They are available in one and two module versions and can be mounted for either side or base entry of cables. Boxes include mounting screws and adhesive tape for quick and easy installation. They meet or exceed EIA/TIA 568A Category 5e specifications. Snap on cover provides for easy access; write-on labels with holders and port icons provide for easy designation of different systems or stations.

Quickly plugs into a standard two-line telephone jack to connect a device to either line one or line two. A combined line one plus line two allows you to keep your two-line telephone connected.

Wall mount box for keystone jacksKeystone Jack Wall Mount Boxes from Cables To Go are perfect for surface mount applications, especially in confined spaces. They are available in one and two module versions and can be mounted for either side or base entry of cables. Boxes come with mounting screws and adhesive tape, and a cable tie for strain relief. The snap-on cover allows for easy closure or access for quick installation. The box will accommodate Cables To Go's keystone jacks or inserts. Each box includes a write-on label with holder for easy designation of different system or station.

This 2-way splitter is compatible with digital broadcast television, digital cable television, off-air antennas and satellite distribution from 15 to 2,150 MHz. Zinc-plated, die-cast housing with precision-machined ports and a soldered back ensure 140 dB isolation against RF leakage. PC board technology eliminates low frequency hum for less noise, and provides a clean, stable return path for data from the cable box or cable modem. DC-passive for devices requiring DC power such as amplified antennas and DBS dishes.

Save yourself the time and cost of an extra service call! This easy-to-use tester helps novice home network users determine cable faults before calling for service. The SOHOTest-E (Small Office Home Office) tester is an economic solution to test the most commonly used cables in residential wiring, those with f-type and RJ45 connectors.Use this handy tester to determine wiring faults in network, phone and cable TV cables before or after installation in cable installations up to 200 meters (656 feet). Has a compact, lightweight design with a small form factor of 2in x 3in x 1in. Uses a pass/fail coaxial test. Includes a remote unit for single person testing.

The Network Controller for HDMI over IP is a Linux-based PC that allows users to control HDMI over IP products, supporting video wall and multiview connectivity. The Network Controller may be managed via a Web interface or the C2G AVoIP Control Smartphone & Tablet App.When installed on a local area network (LAN), the Network Controller will scan the LAN for connected C2G HDMI over IP products allowing the user to auto-discover, configure, manage connectivity and support firmware upgrades for the AV over IP devices through the Web interface. The Network Controller may also be managed by the C2G AVoIP Control App for a more user-friendly experience. An Application Program Interface (API) is available ― supporting several third-party partner control applications running on smartphones and tables.Note: When installed in an electrically noisy environment, an STP cable must be used. Also, cross-connection reduces the effective distance depending on the grade of twisted cable used.

This kit consists of the CT10 toner/blinker, the CT15 tone probe, the CC2 carrying case, and one RJ45 jumper cord; it is specifically designed for network managers and technicians. Toning an active LAN circuit can disrupt network traffic and is difficult to track due to cable twist and tone bleed. This test system works with both active and inactive (dark) cables, and features a port ID function that blinks the link light to verify cable connectivity. This feature also provides a simple and effective method to identify a connected hub or switch port assignment on active networks. This kit also detects shorts by using a built-in continuity check. Three different blink rates are provided to ensure compatibility with equipment from a wide range of manufacturers. Traditional toning (a total of four audible tones) with two different tone frequencies and patterns is provided for non-active circuit tracing. The CT10 toner/blinker has a female RJ45 connector for easy network connection to connect with the included RJ45 patch cord. It has a unique capability of user-selectable blink rates for compatibility with the widest range of LAN equipment. Detachable alligator clips can connect to punchdown blocks or unterminated cables. Auto power down extends battery life, and a built-in low battery indicator warns when battery replacement is required. The CT15 tone probe is ergonomically designed, and incorporates volume control, non-conductive plastic tip, and complete compatibility with existing toners.

Ready to work with multiple vendor's equipment, this patch panel is made for exceptional performance with black electrostatic powder-coated steel and 50 micron gold-plated contacts. Every panel comes with 110-type termination, while meeting and exceeding TIA/EIA-568-B Cat6 connecting hardware specifications. The clear numbering on both the front and back of each panel provides a quick, easy way to identify cable runs.Broken or damaged connectors are no longer a problem; you can quickly and easily replace them with Cables To Go keystone jacks. The high density 19-inch panel design lets you mount to any standard 19-inch rack or cabinet, accommodates top, bottom or side cable entry, and also saves valuable space in your rack. It also has a write-on designation label with a clear holder on the front and the rear.

Custom configure your patch panel for ethernet or multimedia Cables To Go's Blank Keystone/Multimedia Patch Panels offer you all the functionality and compatibility as any name brand at a fraction of the cost. Each panel has cutouts that accept virtually all snap-in jacks, making the panels perfect for ethernet, voice, audio/video, and/or other applications. The clear numbering on the front gives you a quick and easy way to identify cable runs. Designed to mount to any standard 19in Relay Rack, Cabinet or Wall Bracket.