Showing 10–20 of 22 results

This 2-way splitter is compatible with digital broadcast television, digital cable television, off-air antennas and satellite distribution from 15 to 2,150 MHz. Zinc-plated, die-cast housing with precision-machined ports and a soldered back ensure 140 dB isolation against RF leakage. PC board technology eliminates low frequency hum for less noise, and provides a clean, stable return path for data from the cable box or cable modem. DC-passive for devices requiring DC power such as amplified antennas and DBS dishes.

Wall mount box for keystone jacksKeystone Jack Wall Mount Boxes from Cables To Go are perfect for surface mount applications, especially in confined spaces. They are available in one and two module versions and can be mounted for either side or base entry of cables. Boxes come with mounting screws and adhesive tape, and a cable tie for strain relief. The snap-on cover allows for easy closure or access for quick installation. The box will accommodate Cables To Go's keystone jacks or inserts. Each box includes a write-on label with holder for easy designation of different system or station.

Cables To Go's Blank Keystone/Multimedia Patch Panels offer you all the functionality and compatibility as any name brand at a fraction of the cost. Each panel has cutouts that accept virtually all snap-in jacks, making the panels perfect for ethernet, voice, audio/video, and/or other applications. The clear numbering on the front gives you a quick and easy way to identify cable runs. Designed to mount to any standard 19in Relay Rack, Cabinet or Wall Bracket. - Ports: 24. - Size: 2U. - Perfect configurable solution for setting up a network. - Use keystone jacks and keystone inserts to configure your panel to accommodate a variety of schemes. - Mounts to all standard 19in racks and wall brackets.

The right tool to quickly test proper LAN operation after completing a move, add or change (MAC)The Pinger Plus is a unique handheld tester used for installing and maintaining computer Local Area Networks (LANs) running the TCP/IP protocol. It uses the powerful PING function at either 10 or 100 Mbps to verify connectivity, to check transmitted and received data integrity, to indicate network traffic loading by measuring round trip time, and to provide the MAC address of an IP address and warn when the default gateway cannot be located.The Pinger Plus can PING using variable packet sizes and up to 99 times consecutively. In addition, PING can be performed for a single IP address, or a range of IP addresses. The Pinger Plus also identifies reversed polarity for improperly connected wire pairs, and provides a port ID feature with selectable blink rates to identify to which port on a hub or switch the wall outlet is connected.This is the first handheld tester to provide gigabit over copper link detection. When connected to a hub, switch or NIC, the Pinger Plus displays the speed (10/100/1000 Mbps) and duplex mode (half or full) capabilities of the equipment. The Pinger Plus is an ideal tool for quickly testing proper LAN operation after completing a move, add or change (MAC). Trouble calls are easily handled by verifying link connection and running the comprehensive PING test. Resolve internet connectivity issues with the DHCP client mode that ensures a DHCP server is available and displays IP address assignment. Remote office support can be provided by connecting the Pinger Plus to the LAN at the remote office trouble point, and PINGing the tester over the internet.- PINGs at full 10/100 auto-negotiate speeds.- PINGs a single, a list, or a range of IP addresses.- Identifies 10/100/1000Base-TX link signals.- Stores up to 8 preprogrammed profiles that include Pinger Plus IP address, gateway address and 1 - 8 destination IP addresses that can be PINGed individually or successively.- Verifies LAN operation at a remote location over the internet.- Displays the MAC address for a tested IP address.- Provides port identification function (link light activation).- Identifies wire pair connections with reversed polarity.- DHCP client capability verifies DHCP server functioning and correct IP addresses are being provided.- Web browser interface for unit setup and software upgrade.- Alphanumeric keyboard for easy IP address entry.

The 1-Port USB-C Extender Transmitter to Receiver Kit is a perfect solution for classrooms, conference rooms, and huddle spaces needing an innovatively simple yet powerful solution for extending USB signals beyond their native 5m length limitation. Using USB 3.2 Gen 1, this solution provides increased bandwidth and faster data transfer speeds, up to 5Gbps, at lengths up to 10m. The solution offers bus power with optional 5V 3A DC input (not included). Plug and play installation is quick and easy, with no software or drivers required. Reduce cable clutter by running the included 33ft link cable between connections.

This 4-way splitter is compatible with digital broadcast television, digital cable television, off-air antennas and satellite distribution from 15 to 2,150 MHz. Zinc-plated, die-cast housing with precision-machined ports and a soldered back ensure 140 dB isolation against RF leakage. PC board technology eliminates low frequency hum for less noise, and provides a clean, stable return path for data from the cable box or cable modem. DC-passive for devices requiring DC power such as amplified antennas and DBS dishes.

This 24-Port Cat5E 110-Type Patch Panel is made for optimum performance with black electrostatic powder-coated steel and 50 micron gold-plated contacts. Every panel comes in traditional 6-port module format with 110-type terminations, and meets and exceeds EIA/TIA TSB-40 Cat5E connecting hardware specifications.This high density 19-inch 1RU panel design lets you mount in any standard 19-inch rack or cabinet, accommodates top, bottom or side cable entry, and also saves valuable space in your rack.The 24-Port Cat5E 110-Type Patch Panel enables effortless installation with easy identification vibrant color labels for 568 A or B specifications. Each terminal offers a wide 110 termination layout and a write-on designation label with a clear holder on the front and numbering on both the front and back to provide a quick, easy way to identify cable runs.

Cables To Go's Blank Keystone/Multimedia Patch Panels offer you all the functionality and compatibility as any name brand at a fraction of the cost. Each panel has cutouts that accept virtually all snap-in jacks, making the panels perfect for ethernet, voice, audio/video, and/or other applications. The clear numbering on the front gives you a quick and easy way to identify cable runs. Designed to mount to any standard 19in Relay Rack, Cabinet or Wall Bracket. - Ports: 12. - Size: 1U. - Perfect configurable solution for setting up a network. - Use keystone jacks and keystone inserts to configure your panel to accommodate a variety of schemes. - Mounts to all standard 19in racks and wall brackets.

C2G Blank Keystone/Multimedia Patch Panel 16-Port. Mounting: Rack mounting, Rack capacity: 1U

The LANtest Pro is a small hand-held tester that enables the user to quickly read the status of Ethernet twisted pair cables. It tests for faults such as open circuits, shorts, crossed pairs, reversed pairs and split pairs in seconds. The LANtest Pro includes one master unit and one remote unit easily operated by one person testing patch cords or installed cables. Moreover, the small remote unit is designed to slip into the master unit to prevent loss or damage. The compact design is also very user-friendly and can be conveniently carried to any job site.