Showing 2200–2210 of 2387 results

For network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications where cables are required.

For network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications where cables are required.

For voice/data/video distribution, this cable it will handle bandwidth-intensive applications up to 550 MHz. Meets all Cat6 TIA/EIA-568-B-2.1, draft 9 standards, and drastically reduces both impedance and structural return loss (SRL) when compared to standard 100 MHz wire. Each of the individual pairs is bonded together to help maintain the twist-spacing throughout the line right up to the termination point.Constructed from high-quality cable and a shortened body plug, this design minimizes Near-End Crosstalk (NEXT) levels. The moulded, snagless boot prevents unwanted cable snags during installation and provides extra strain relief. Available in a variety of Colours to easily colour-code your network installation.Connector 1: (1) RJ-45 MaleConnector 2: (1) RJ-45 Male

When working in a wiring closet or a cabinet space is limited and cords can easily be misidentified and disconnected causing detrimental downtime. Perform maintenance tasks with confidence by using color power cords in a data environment allowing for quick and accurate identification of equipment.Power UpConnect PDUs to servers, switches, or other data center equipment. This cable can deliver 15 Amps up to 250 Volts to any connected device ensuring correct operating powerLevel UpEach color power cable is constructed to the highest industry standards, to ensure high-quality installs and deliver the stability and durability that is needed for reliable network performance.Maintain ExcellenceAllow IT technicians to perform maintenance tasks with confidence and easily locate equipment based on functionality or location, saving both time and money using color coded power cables.

Today's advanced fast ethernet and gigabit computer networks require Enhanced Category 5 high-speed cabling to distrubute data, voice and video. Cables To Go's Enhanced Cat5 350Mhz Patch Cables will keep you ahead of the game. These cables will handle bandwidth intensive applications up to 350 Mhz and beyond. Each meets all Cat 5e TIA/EIA standards, and drastically reduce both impedance and structural return loss (SRL) as compared to standard 100 Mhz wire! Constructed with high-quality cable and a shortened body plug, this design will keep Near-End Crosstalk (NEXT) levels to a minimum. Cables To Go 350Mhz Patch cables are available in a variety of colors to easily color-code your network installation. - Connector: 50-micron gold plated RJ-45 Male to Male - Conductor: 4-pair 24 AWG Stranded Copper - Jacket: PVC Applications: - 1000 BASE-T; 100 BASE-T; 10 BASE-T (IEEE 802.3) - 4/16 Mbps Token Ring (IEEE 802.5); 100 VG-AnyLAN - 100 Mbps TP-PMD (ANSI X3T9.5); 55/155 Mbps ATM - Voice - Designed For: Network Adapters, Hubs, Switches, Routers, DSL/Cable Modems, Patch Panels and other twisted-pair applications - Exceeds Category 5e specifications - Wired: TSB 568B (AT&T 258A) - Certification: TIA/EIA

"These RG59 F-Type Cables are constructed with 75ohm coaxial cable that delivers high-quality video images. Low-loss 75ohm copper-clad wire and foam dielectric provides accurate picture resolution and color. A foil and braid shield protects against unwanted noise and interference. The molded connectors attach to a flexible jacket allowing for easy installation. The 24K gold plated heavy-duty connectors ensure long lasting, corrosion-free connections. Connect cable boxes, VCRs, WebTV or any video source with F-type output connections to any TV with matching F-type input jacks. Ordinary, ""included in the box"" F-type cables often use low-quality materials with inferior shielding, which can result in poor picture quality. These RG59 F-Type Cables deliver all the detail, color and brightness you expect from your audio/video components."

Velocity™ S-Video Interconnects from Impact Acoustics provide the perfect solution for connecting extended definition video recorders or digital satellite systems to your a/v receiver or television/monitor. Carefully designed dual 75-ohm precision video conductors ensure optimal video quality. Individually shielded Y (luminance) and C (chrominance) conductors are combined with an overall aluminum foil and OFC braid shield to protect against radio frequency interference (RFI) and electromagnetic interference (EMI). These cost-effective high-performance cables ensure maximum video quality when compared with s-video cables typically included with consumer electronics products. In addition to fitting standard 4-pin S-Video jacks, the Velocity S-video cable fits most 7-pin jacks found on desktop and notebook PC’s with a TV out jack. Features: - Connectors: 4-pin DIN Male to 4-pin DIN Male. - Oxygen-free copper wire delivers all the detail, color and brightness you expect from your S-video component. - Precision-made 24K gold-plated connectors ensure long-lasting sound quality. - Fully molded connectors provide excellent strain relief. - Individually double-shielded 75-ohm coax conductors protect against induced noise or distortion. - Ultra-flexible PVC jacket for easy installation. - Connects digital camcorders, satellite receivers, DVD players, PC with TV out or any video source with S-video output jacks to television, monitor or A/V receiver with S-video input jacks.

Velocity™ 3.5mm Stereo Audio Cables from Impact Acoustics are specifically designed to provide quality music transfer from quality audio applications. The 3.5mm cable lets you connect a PC sound card, portable CD player, MP3 player, iPod®, or any mini-stereo audio device with 3.5mm jacks to your other audio devices. These cables feature two 27-gauge Oxygen Free Copper conductors, a drain wire, an Aluminum Foil Shield to reject noise, and Gold plated connectors to ensure a quality connection.- Connectors: 3.5mm Stereo Male to 3.5mm Stereo Male- Fully molded connectors provide strain relief- Foil shielded to prevent unwanted EMI/RFI interference- Gold-Plated connectors

Pro Series commercial grade CL2 cables offer true digital performance The new Pro Series commercial grade CL2 cables offer true digital performance while meeting the highest standards in building code requirements for in-wall installations. Available for HDMI®, DVI and DVI+3.5mm audio signals, these cables can meet the demands of virtually any commercial installation. By supporting resolutions of 1080p for displays and up to 1920 x 1200 pixels for computers, and with lengths ranging from 6 to 50 feet, the Pro Series is the ideal connectivity solution for A/V equipment used in classrooms or conference rooms. 24k gold-plated connectors prevent metal corrosion, resulting in the optimal signal transfer for the highest picture and sound quality. Shielded 24AWG copper conductors protect against EMI and RFI to ensure uninterrupted performance. High quality materials and construction, along with rigorous factory testing and a full lifetime warranty, guarantee long-term, dependable performance *CL2 is equivalent to FT4 rating in Canada, while CMP is equivalent to FT6.

This Snagless Unshielded Cat6a patch cable is ideal for use with 10GBase-T ports and equipment, such as network adapters, hubs, switches, routers, DSL/cable modems and patch panels, and enables 10 Gigabit data transmission over a 4 pair copper cable allowing connections up to 100 meters. Current Cat6 cabling systems may only support 10 Gigabit Ethernet over limited distances. Each patch cable is fully tested to meet ANSI/TIA 568 C.2 Cat6a channel requirements.Constructed from high quality cable and plugs, this design offers improved alien cross talk performance. The Snagless hood is ideal for high density switch applications. Available in a variety of colors to easily color-code a network installation. Individual length label on each cable for ease of use.