Showing 2270–2280 of 2387 results

Digital Visual Interface (DVI) is the standard interface for a high-performance connection between PCs and flat panel displays, digital CRT displays, projectors, and HDTV. DVI Dual-Link Digital/Analog Video Cables from Cables To Go deliver the high-performance, high-bandwidth interface needed for video displays of today while leaving headroom for the products of tomorrow. These precision-engineered cables are fully compliant with the DVI standard defined by DDWG (Digital Display Working Group). The DVD-D dual link configuration provides enough bandwidth for resolutions up to 2048 x 1536 and allows high speed digital transmission up to 9.9 Gbps. - Connectors: DVI-I 29-pin Male to DVI-I 29-pin Female. - Dual link digital signaling allows for high speed transmission up to 9.9Gbps. - Three analog 30awg coaxial lines allow for high speed analog transmission. - Each coax line is individually wrapped in foam-polyolefin insulation and overwrapped with a braided tinned copper shield. - 28AWG copper conductors are individually insulated in hard-density polypropylene to minimize crosstalk, ensuring high-speed, error-free transmission. - Shielded undermold protects against unwanted EMI/RFI interference. - Gold-plated contacts provide full conductivity with no data loss. - Supports hot plugging of DVI display devices. - PC and Mac compatible/ - Resolutions up to 2048 x 1536. -Supports digital and analog signals. - Compatible with flat panel displays, digital CRT displays, projectors, and HDTV. - Meets DVI DDWG Standard. - PC99 color-coded: White.

Impact Acoustics Pro-Audio Cables are made from twisted pair audio cable under an aluminum foil for maximum shielding from noise. High flexibility, 7mm PVC jacket reduces the risk of cables kinking and damaging the conductors. Bright nickel plating on solid brass connectors resists wear from reconfiguring and moving equipment from one venue to another. Spring strain relief on the 1/4in plug and a chuck strain relief inside the XLR reduce the effects of age on the solder joints and contacts. - 22AWG twisted pair construction - Foil shield and 60% copper braid - Nickel plated brass connectors - Connect unbalanced sources to balanced XLR inputs

Audio/video installations in educational and commercial settings often require plenum-rated cabling. Our plenum-rated line was engineered to overcome common challenges faced by installers.This computer audio/video combination cable is an economic alternative, and saves valuable installation time versus installing and purchasing individual cables. The HD15 connectors are low profile (1.25in total depth) which saves valuable space in the gang box, while the rounded shape (fits 1.25in diameter mounts) accommodates smaller mounts so that the cable can be easily hidden from view. The 3.5mm connectors are also low profile (1.5in total depth) and feature specific breakout lengths to fit your application. The cable is conveniently labeled to identify the 6in breakout for mounting in electrical boxes and the 20in breakout for the display or projector end.This combination cable is constructed from three 30 AWG coaxial plus one 26 AWG twisted pair to ensure RGBHV signal integrity in your installation. The coax cables feature a tinned copper braid that provides 92% minimum shielding. The audio uses 26 AWG fully-shielded conductors to prevent interference from the RGBHV signal. Overall the cable is well constructed to protect and prevent any EMI/RFI interference, and to ensure that the highest quality signal is transmitted for optimal audio/video performance.

Audio/video installations in educational and commercial settings often require plenum-rated cabling. Our plenum-rated line was engineered to overcome common challenges faced by installers. This computer audio/video combination cable is an economic alternative, and saves valuable installation time versus installing and purchasing individual cables. The HD15 connectors are low profile (1.25in total depth) which saves valuable space in the gang box, while the rounded shape (fits 1.25in diameter mounts) accommodates smaller mounts so that the cable can be easily hidden from view. The 3.5mm connectors are also low profile (1.5in total depth) and feature specific breakout lengths to fit your application. The cable is conveniently labeled to identify the 6in breakout for mounting in electrical boxes and the 20in breakout for the display or projector end. This combination cable is constructed from three 30 AWG coaxial plus one 26 AWG twisted pair to ensure RGBHV signal integrity in your installation. The coax cables feature a tinned copper braid that provides 92% minimum shielding. The audio uses 26 AWG fully-shielded conductors to prevent interference from the RGBHV signal. Overall the cable is well constructed to protect and prevent any EMI/RFI interference, and to ensure that the highest quality signal is transmitted for optimal audio/video performance.

For voice/data/video distribution, this cable will handle bandwidth-intensive applications up to 125 MHz. Meets ANSI/TIA-568-C.2 Cat5e standard and the stringent TAA compliance requirements for anyone who needs to procure products exclusively manufactured in countries on the Trade Agreement Act list. Each of the individual pairs is bonded together to help maintain the twist-spacing throughout the line right up to the termination point. Constructed from high-quality cable and a shortened body plug, this design minimizes Near-End Crosstalk (NEXT) levels. Available in a variety of colors to easily color-code your network installation.

For voice/data/video distribution, this cable will handle bandwidth-intensive applications up to 125 MHz. Meets ANSI/TIA-568-C.2 Cat5e standard and the stringent TAA compliance requirements for anyone who needs to procure products exclusively manufactured in countries on the Trade Agreement Act list. Each of the individual pairs is bonded together to help maintain the twist-spacing throughout the line right up to the termination point. Constructed from high-quality cable and a shortened body plug, this design minimizes Near-End Crosstalk (NEXT) levels. Available in a variety of colors to easily color-code your network installation.

C2G 20FT BLUE SNAGLESS CAT5E CABLE TAA

The Ultima Series of Mini USB 2.0 Cables from Cables To Go combines style, quality, performance and value while giving you the ultimate in cable technology. The Ultima Cable is ideal for transferring pictures, video, music and more from your digital camera, digital camcorder and MP3 player. The sleek design of the molded connectors makes them easy to grip. The connectors are color coded to match the ports on your personal computer or notebook, ensuring a simple connection. The charcoal gray cable jacket not only matches your case, but disappears behind your desk leaving a clean organized look. The Ultima Series meets the rigid standards of everyday use. The USB 2.0 cable is double-shielded with a dual foil and braid. A metal shield surrounds the connector, while a solder-to-connector shell and cable braid create an end-to-end shielding solution for a noise-free connection. Features: - Connectors: USB A Male to USB Mini B Male - Provides hi-speed data transfer up to 480Mbps - 24k gold connectors provide maximum corrosion resistance for error-free data transfer - Ultra-flexible jacket makes installation easy - Heavy-duty molded strain relief provides increased flexibility and durability - Foil and braid shield reduces interference - Matched twisted-pair wires with electrical resistance minimizes cross talk a for high-speed, error-free data transfer - Heavy-duty 22 AWG power wires provide the proper current to your USB device - Metal connector shield meets FCC requirements on EMI/RFI interference - Compatible with PC and Mac® - Ideal for connecting digital camera, digital camcorder, MP3 player, more to your computer Compatible with: - Minolta DiMAGE S404 - Minolta DiMAGE S414 - Minolta DiMAGE S304 - Samsung DigiMax 130 - Toshiba PDR-2300 - Evolution EV 64 AMX MP3 Player

The C2G Select VGA Video Cable is perfect for source to display connectivity for in-home desktop or in-wall commercial applications which require video resolutions of up to QXGA (2048x1536). The CMG rated jacket provides a solution for in-wall applications, while the low-profile, rounded connectors make installing in tight spaces, such as a projector mount pole, easy. This cable is designed to support high resolution video applications over long distances of up to 150ft. All 15 pins are wired providing support for DDC2 (E-DDC) and Extended Display Identification Data (EDID) signals, i.e. communication of the display?s capabilities, ensuring that the content from the source is sent at the optimal resolution for the display.

For voice/data/video distribution, this cable will handle bandwidth-intensive applications up to 125 MHz. Meets ANSI/TIA-568-C.2 Cat5e standard and the stringent TAA compliance requirements for anyone who needs to procure products exclusively manufactured in countries on the Trade Agreement Act list. Each of the individual pairs is bonded together to help maintain the twist-spacing throughout the line right up to the termination point. Constructed from high-quality cable and a shortened body plug, this design minimizes Near-End Crosstalk (NEXT) levels. Available in a variety of colors to easily color-code your network installation.