APC Basic Rack PDU , Input: 400V 3PH , Input Connections: IEC 309 16A 3P+N+PE , Cord Length: 3 feet ( 0.91 meters ) , Output: 230V , Output Connections: IEC 320 C13,IEC 320 C19.- Low Cost Power Distribution.- Vertical mounting capability.- Toolless mounting capability.- Multi-branch power input.
Audible alarmsProvides notification of changing utility power and UPS power conditionsAutomatic self-testPeriodic battery self-test ensures early detection of a battery that needs to be replaced.Battery failure notificationProvides early-warning fault analysis on batteries enabling timely preventive maintenanceBattery replacement without toolsEnables fast battery replacement, lowering Mean Time to Repair (MTTR).Boost Automatic Voltage Regulation (AVR)Preserves battery life and maximizes runtime by correcting low voltages without discharging the battery.Building Wiring Fault IndicatorThis LED informs users of potentially dangerous wiring problems in the wall circuit.Cold-start capableProvides temporary battery power when the utility power is out.Dataline surge protectionProvides protection of connected equipment from power surges on the data lines.Disconnected battery notificationWarns when a battery is not available to provide backup power.Hot-swappable batteriesEnsures clean, uninterrupted power to protected equipment while batteries are being replacedIntelligent battery managementMaximizes battery performance, life, and reliability through intelligent, precision charging.LCD graphics displayText and mimic diagrams that display modes of operation, system parameters and alarms.Lifetime data recovery warrantyProvides peace of mind by providing professional data recovery services in the event data is lost due to the failure of the unit.Resettable circuit breakerEasy recovery from overloads; no need to replace a fuse.Safety-agency approvedEnsures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.Transformer Block SpacingConnect bulky transformer block plugs without covering up other outlets.USB connectivityProvides management of the UPS via a USB port (not available on all models).User-replaceable batteriesIncreases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)
APC SMX2KRMLVNCUS uninterruptible power supply (UPS) Line-Interactive 1.92 kVA 1800 W
APC Metered Rack Power Distribution Units (PDUs) provide active metering to enable energy optimization and circuit protection. User-defined alarm thresholds mitigate risk with real-time local and remote alerts to warn of potential circuit overloads. Metered Rack PDUs provide power utilization data to allow Data Center Managers to make informed decisions on load balancing and right sizing IT environments to lower total cost of ownership. Metered Rack PDUs include real power monitoring, a temperature/humidity sensor port, locking IEC receptacles, and ultra low profile circuit breakers. Users can access and configure Metered Rack PDUs through secure Web, SNMP, or Telnet Interfaces which are complimented by APC Centralized Management platforms using InfraStruxure Central, Operations, Capacity, and Energy Efficiency.
Audible alarmsProvides notification of changing utility power and UPS power conditionsAutomatic self-testPeriodic battery self-test ensures early detection of a battery that needs to be replaced.Battery failure notificationProvides early-warning fault analysis on batteries enabling timely preventive maintenanceBattery replacement without toolsEnables fast battery replacement, lowering Mean Time to Repair (MTTR).Boost Automatic Voltage Regulation (AVR)Preserves battery life and maximizes runtime by correcting low voltages without discharging the battery.Building Wiring Fault IndicatorThis LED informs users of potentially dangerous wiring problems in the wall circuit.Cold-start capableProvides temporary battery power when the utility power is out.Dataline surge protectionProvides protection of connected equipment from power surges on the data lines.Disconnected battery notificationWarns when a battery is not available to provide backup power.Hot-swappable batteriesEnsures clean, uninterrupted power to protected equipment while batteries are being replacedIntelligent battery managementMaximizes battery performance, life, and reliability through intelligent, precision charging.LCD graphics displayText and mimic diagrams that display modes of operation, system parameters and alarms.Lifetime data recovery warrantyProvides peace of mind by providing professional data recovery services in the event data is lost due to the failure of the unit.Resettable circuit breakerEasy recovery from overloads; no need to replace a fuse.Safety-agency approvedEnsures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.Transformer Block SpacingConnect bulky transformer block plugs without covering up other outlets.USB connectivityProvides management of the UPS via a USB port (not available on all models).User-replaceable batteriesIncreases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)
Adjustable voltage sensitivityProvides the ability to adapt the UPS for optimal performance in specific power environments or generator applications.Audible alarmsProvides notification of changing utility power and UPS power conditionsAutomatic self-testPeriodic battery self-test ensures early detection of a battery that needs to be replaced.Battery failure notificationProvides early-warning fault analysis on batteries enabling timely preventive maintenanceBattery replacement without toolsEnables fast battery replacement, lowering Mean Time to Repair (MTTR).Battery-protected and surge-only outletsReserves power capacity and run time for connected equipment that require UPS battery back-up while providing surge only protection for less critical equipmentBoost Automatic Voltage Regulation (AVR)Preserves battery life and maximizes runtime by correcting low voltages without discharging the battery.Building Wiring Fault IndicatorThis LED informs users of potentially dangerous wiring problems in the wall circuit.Cold-start capableProvides temporary battery power when the utility power is out.Dataline surge protectionProvides protection of connected equipment from power surges on the data lines.Disconnected battery notificationWarns when a battery is not available to provide backup power.Hot-swappable batteriesEnsures clean, uninterrupted power to protected equipment while batteries are being replacedIntelligent battery managementMaximizes battery performance, life, and reliability through intelligent, precision charging.LCD graphics displayText and mimic diagrams that display modes of operation, system parameters and alarms.Lifetime data recovery warrantyProvides peace of mind by providing professional data recovery services in the event data is lost due to the failure of the unit.Resettable circuit breakerEasy recovery from overloads; no need to replace a fuse.Safety-agency approvedEnsures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.Transformer Block SpacingConnect bulky transformer block plugs without covering up other outlets.USB connectivityProvides management of the UPS via a USB port (not available on all models).User-replaceable batteriesIncreases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)
One battery string for the Galaxy VS UPS. This string contains 9 Ah batteries.
Cable kit that includes power cables and signal cables for installation of 1 or several modular battery cabinets adjacent to the Galaxy UPS for external batteries. This cable kit is for use with the Galaxy VS Modular Battery Cabinet for 6 smart modular battery strings. One kit required for the full system.
One long-life 9 Ah battery module for the Galaxy VS UPS.
Unique colors, input cord plugs and outlet configurations done simply and delivered to specification.Single input power sourceSupply power from one branch whip to multiple pieces of equipment, conveniently powering rack-mount equipment. Saves time and money during installation by using one branch whip and standard connections.Power DelaysAllows users to configure the sequence in which power is turned on or off for each outlet. This helps avoid in-rushes at start-up, which can cause overloaded circuits and dropped loads. Sequencing also allows users to predetermine which piece of equipment is turned on first so other equipment dependant on that unit will function properly.Local Current Monitoring DisplayThe aggregate current draw per rack PDU is displayed on the unit via a digital display. The local digital display helps installers avoid overloaded circuits by providing a visible warning when the current draw is close to the maximum amperage draw of the strip. (Available on designated SKUs only)Flash UpgradeableQuickly and easily upgrade firmware via network download for future product enhancements. Eliminates the need to replace products already installed in the field when new features are released. (Note: Networked units only)Load indicator LEDIndicates overload and warning conditions based on the user-defined alarm thresholds. Alerts users of potential overloaded circuits. (Note: Only available with units with local current monitoring feature)Network Management CapabilitiesFull-featured network management interfaces that provide standards-based management via Web, SNMP, and Telnet. Allows users to access, configure, and manage rack PDUs from remote locations to save valuable time. Associated with this feature is the ability to quickly and easily upgrade the firmware via network download to installed units for future product enhancements.Metering-by-Outlet capabilityIndividual outlet level power metering provides a more granular view of the power distributed to equipment within the enclosure. It also provides the ability to analyze component power trends and perform capacity planning.Remote Individual Outlet ControlRemotely manage outlets so users can turn outlets off that are not in use (prevent overloads) or recycle power to locked-up equipment (minimize costly downtime and avoid travel time to equipment).Alarm ThresholdsDefine alarm thresholds in order to avoid overloaded circuits. Network and visual alarms inform the user of possible problems. (Note: Only available on units with the current monitoring capabilities. Please see SKU specifications for availability)
MFR: Netgear, Inc
Qty: 1
Part #: GS105NA