Showing 10450–10460 of 11332 results

110/KRONE IDC punchdown; T568A/BCat 5e Surface Mount Boxes from Cables To Go are perfect for surface mount applications, especially in confined spaces. They are available in one and two module versions and can be mounted for either side or base entry of cables. Boxes include mounting screws and adhesive tape for quick and easy installation. They meet or exceed EIA/TIA 568A Category 5e specifications. Snap on cover provides for easy access; write-on labels with holders and port icons provide for easy designation of different systems or stations.

Wall mount box for keystone jacksKeystone Jack Wall Mount Boxes from Cables To Go are perfect for surface mount applications, especially in confined spaces. They are available in one and two module versions and can be mounted for either side or base entry of cables. Boxes come with mounting screws and adhesive tape, and a cable tie for strain relief. The snap-on cover allows for easy closure or access for quick installation. The box will accommodate Cables To Go's keystone jacks or inserts. Each box includes a write-on label with holder for easy designation of different system or station.

This 2-way splitter is compatible with digital broadcast television, digital cable television, off-air antennas and satellite distribution from 15 to 2,150 MHz. Zinc-plated, die-cast housing with precision-machined ports and a soldered back ensure 140 dB isolation against RF leakage. PC board technology eliminates low frequency hum for less noise, and provides a clean, stable return path for data from the cable box or cable modem. DC-passive for devices requiring DC power such as amplified antennas and DBS dishes.

Quickly plugs into a standard two-line telephone jack to connect a device to either line one or line two. A combined line one plus line two allows you to keep your two-line telephone connected.

HPE NS204I-U Enablement kit

AddOn Networks 10G-SFPP-TX-LP-A-AO network transceiver module Copper 10000 Mbit/s SFP+

Luxul Wireless 10G-RJ45 network transceiver module Copper 10000 Mbit/s SFP+

- Facilitates deployment of PoE devices where power outlets are not available - Reduces installation and network equipment costs by eliminating the need for electrical wiring - Provides power over existing network cabling to PoE devices such as access points, IP cameras, and IP phones - Lightweight, compact and easy to install - Supports 802.3af / 802.3at - 10/100/1000 interface provides flexibility for all types of connections D-Link’s DPE-301GI 1-Port PoE Injector is used to provide I.T. Professionals with the benefits of Power over Ethernet (PoE), even when other devices in the network do not support it. With PoE technology, low voltage DC power and Ethernet data signals are combined on a single network cable, which facilitates powering of end devices like IP Cameras, wireless Access Points (APs), and VoIP Phones. This reduces cable clutter, eliminates the need for dedicated electrical outlets on the wall, ceiling, or other unreachable places, reduces installation time, and lowers costs. The DPE-301GI device supports Gigabit speeds, and can connect to 10Mbps, 100Mbps or 1000Mbps through the RJ-45 interface. This device also supports the IEEE 802.3af and 802.3at PoE/PoE+ standards, which ensures interoperability with other standards-based PoE and PoE+ devices. Small and compact, the DPE-301GI is lightweight, has integrated mounting slots, and is easy to install. The DPE-301GI provides a power and data connection to a PoE device over a single network cable. It allows I.T. Professionals to mount their PoE devices virtually anywhere in a building, such as on ceilings or near entryways, and eliminates the need for nearby power outlets and attached power supplies. The DPE-301GI combines electrical power with a Gigabit network connection and produces a Gigabit PoE signal, allowing a single Ethernet cable to carry both data and power to a device. Also known as a “midspan PSE”, the DPE-301GI PoE injector can be used when deploying a multi-port PoE switch is impractical or not feasible. It has two 10/100/1000 RJ-45 ports. One port is for LAN IN, which is the network connection,typically connected to a non-PoE switch or router. The other port isfor PoE OUT, which is the connection that provides both power and data signal to the end device (PD). The DPE-301GI can be located anywhere on the Ethernet link, although it’s typically placed near the switch/router. Location of the injector does not impact the maximum 100m (328ft.) distance from the switch/router to the end device. Support for IEEE 802.3at ensures the DPE-301GI can power PoE+ devices up to 30W, such as high power 802.11ac APs and IP cameras with PTZ motors, heaters and blowers. PoE Injector and PoE Splitter Tandem Both the DPE-301GI (injector) and DPE-301GS (splitter) can be used together, as a complete PoE transport system. This is especially useful when a PoE switch is not available, and the end device is not PoE capable, but the Network Administrator still prefers the benefits of PoE. Simply install the injector close to the network switch, install the splitter close to the end device, and plug in the cables.

Luxul Wireless 10G-MM-DX-LC network transceiver module Fiber optic 10000 Mbit/s SFP+ 850 nm

Luxul Wireless 10G-SM-DX-LC network transceiver module Fiber optic 10000 Mbit/s SFP+ 1310 nm