Showing 890–900 of 1515 results

RAM Mounts RAM-GDS-DOCK-SAM62U holder Active holder Tablet/UMPC Black

The magnetic version of the GDS® Hand-Stand™ tablet hand strap and kickstand is a perfect accessory for enabling your tablet device for field use, and is compatible with any IntelliSkin® sleeve that features the unique circular interface as an attachment point. With the magnetic strap, easily secure your device to a number of metal surfaces. The GDS® Hand-Stand™ is specifically designed for the enterprise customer, while being an ideal solution for consumers alike. Its unique design integrates a comfortable hand strap that’s compatible with a gloved hand, while also featuring the ability to be rotated 360 degrees to for an ideal viewing angle. In addition, an integrated kickstand allows for positioning the tablet on a flat surface for on the go operation of your tablet.

RAM Mounts RAM-HOL-AP36U holder Passive holder Tablet/UMPC Black

The RAM-HOL-GA25LU consists of a high strength composite locking case and hole pattern that will allow the attachment to all RAM components or mounts that contain the universal AMPs hole pattern. Compatible and interchangeable with a wide range of popular RAM Mounting products, this locking case is ready to compliment your GPS and become the most useful accessory in your vehicle. Included is a set of two nuts and bolts to connect the cradle to any RAM components or mounts that contain the universal AMPs hole pattern.

The RAM EZ-Roll'r Powered Key Locking Cradle for Sonim XP8 secures your device in a form-fit holder while keeping the entire screen and buttons visible and accessible. This powered cradle features two integrated pogo pins that provide charging capabilities to the device through male USB Type A connector, and includes key lock for extra security and peace of mind. Single-handed operation makes it easy to dock and remove the Sonim XP8—simply lift the top lever and pull out the device, or place bottom portion of the device in first and push in to lock in place. Compatible with RAM two-hole AMPS pattern bases and RAM® microphone brackets, this RAM form-fit cradle easily connects to B and C size ball mounts for use in a wide variety of applications.

"The spring loaded cradle is durable and allows for easy removal or insertion of your tablet. Cup ends are designed to optimize the functionality of your tablet, allowing access to audio jacks, usb, power, and other ports, your tablet can be used just as it was intended. With a full complement of compatible mounts, you are sure to find the perfect solution for all your mobile needs.Included is a set of four nuts and bolts to connect the cradle to any RAM components or mounts that contain the universal AMPs hole pattern. The Tab-Tite cradle is compatible with any tablet that will fit the dimensions listed below. It is important to verify the dimensions of your tablet when determining the overall size. Please see the compatible devices for known devices that fit in this cradel. Cradle Dimensions: Height: 9.75"" to 12"" Width: 6.38"" to 8.62"" Depth: 0.13"" to 1"""

"The RAM Tab-Tite spring loaded, quick release cradle offers a secure fit with easy access to the mounted tablet. The interchangeable cup ends are designed specifically for the Samsung Galaxy Tab 4 8.0 and Tab S 8.4 with an Otterbox Defender case. The spring loaded design makes it easy to insert and remove your tablet, along with keeping it secure in mobile applications. The custom end cups are designed to optimize the functionality of your tablet, enabling access to all ports and tablet functions. The included back plate is interchangeable with various size support cups, making it compatible with numerous tablet models. New detachable support cups are the only components needed for purchase, attach to the back plate for support of your new tablet. Included is a set of four nuts and bolts to connect the cradle to any RAM components or mounts that contain the universal AMPs hole pattern. For off-road environments and extreme use, we recommended the use of a tether to assist in retaining your device. The Tab-Tite cradle is compatible with any tablet that will fit the dimensions listed below. It is important to verify the dimensions of your tablet when determining the overall size. Cradle Dimensions: Length: 8.32"" to 10.92"" Width: 4.43"" to 5.3"" Depth: 0.13"" to 0.62"" Note: Product consists of holder only. Case not included."

"The RAM Tab-Tite spring loaded, quick release cradle offers a secure fit with easy access to the mounted tablet. The interchangeable cup ends are designed specifically for the Samsung Galaxy Tab A 8.0 and Tab A 8.0 with S Pen. The spring loaded design makes it easy to insert and remove your tablet, along with keeping it secure in mobile applications. The custom end cups are designed to optimize the functionality of your tablet, enabling access to all ports and tablet functions. Included is a set of four nuts and bolts to connect the cradle to any RAM components or mounts that contain the universal AMPs hole pattern. For off-road environments and extreme use, we recommended the use of a tether to assist in retaining your device. The Tab-Tite cradle is compatible with any tablet that will fit the dimensions listed below. It is important to verify the dimensions of your tablet when determining the overall size. Note: This RAM Tab-Tite is not compatible with the Samsung Galaxy Tab A 8.0 (2017). For this tablet, see RAM-HOL-TAB24U . Cradle Dimensions: Height: 7.88"" to 10.38"" Width: 4.3"" to 5.3"" Depth: 0.0"" to 0.37"""

RAM Mounts RAM-HOL-TAB4U holder Passive holder Tablet/UMPC Black

"The RAM-HOL-TABL12U consists of a spring loaded backplate, custom support cups and locking mechanism for the iPad mini WITH skin, sleeve or case. This spring loaded design makes it easy to load and unload your iPad mini, along with keeping it secure while on the go. Cup ends are designed to optimize the functionality of your tablet, allowing access to audio jacks, usb, power, and other ports, your iPad mini can be used just as it was intended. Quickly lock the cradle, keeping your iPad mini secure and safe from theft. Included is a set of four nuts and bolts to connect the cradle to any RAM components or mounts that contain the universal AMPs hole pattern. The included back plate is interchangeable with various size support cups, making it compatible with numerous tablet models. New detachable support cups are the only components needed for purchase, attach to the back plate for support of your new tablet. The Tab-Lock cradle is compatible with any tablet that will fit the dimensions listed below. It is important to verify the dimensions of your tablet when determining the overall size. Cradle Dimensions: Height: 6.75"" to 8.75"" Width: 5.06"" to 5.68"" Depth: 0.13"" to 1"" Note: Product consists of holder only. Case not included."