Showing 5350–5360 of 10509 results

"The RAM-103U-D consists of the 1.5"" C size diameter ball and socket system with one open socket end; RAM-201U-D socket arm is long length at 9.125"" end to end with a 8"" socket-to-socket length. This mount is designed to be used with any of the C size RAM Mount bases or cradles with a 1.5"" diameter rubber ball. The RAM-202U RAM Round Plate Ball Base features industry standard AMPS hole pattern with 2.5"" diameter base and can be used as an adapter to attach a holder, or a mounting drill-down base."

"The RAM-101-LO11 consists of a 2.5"" diameter round base that contains the universal AMPS hole pattern double socket arm and adapter base that inserts directly to the back of Lowrance Elite-5, Mark-5 and Hook-5 Fishfinders. The adapter serves as a quick release mechanism, allowing you to remove or transfer your Fishfinder in seconds. Designed into the mount is a 1.5"" diameter patented rubber ball and socket system with adjustment points at both socket ends of the arm; this with RAM's rubber ball and socket technology allows for almost infinite adjustment and perfect viewing angles."

"The RAM-101MU consists of a double socket arm with metal knob and two 2.5"" diameter round bases with the universal AMPS hole pattern. Designed into the mount is a 1.5"" diameter patented rubber ball and socket system with adjustment points at both socket ends of the arm. Rubber ball and socket technology allows for almost infinite adjustment and perfect viewing angles. High quality materials insure your device is safe, secure, and within easy reach. RAM's patented design also dampens shock and vibration helping to extend the life of your device."

"The RAM-101U-247-25 consists of a double socket arm, round 2.5"" diameter round base with the universal AMPS hole pattern and 2.5"" clamp base. The clamp base will wrap around a maximum width of 2.5"" and is tightened by screwing the two plates together with the included nuts and bolts. Rubber ball, socket technology dampens shock and vibration, as well as allows for almost infinite adjustment, perfect viewing angles."

"The RAM-103-D-238U consists of the 1.5"" C size diameter ball and socket system with one open socket end; RAM-201U-D socket arm is long length at 9.125"" end to end with a 8"" socket-to-socket length. This mount is designed to be used with any of the C size RAM Mount bases or cradles with a 1.5"" diameter rubber ball. The RAM-238U RAM Diamond Ball Base features industry standard AMPS 2-hole pattern and can be used as an adapter to attach a holder, or a mounting drill-down base."

"The RAM-103U consists of the 1.5"" diameter ball and socket system with one open socket end. This mount is designed to be used with any of the RAM mounting bases or cradles with a 1.5"" diameter rubber ball. The RAM-202U round base has a 1.5"" diameter rubber ball connected at right angles to a 2.5"" diameter base. The plate has pre-drilled holes in the base, including the universal AMPS hole pattern."

"The RAM-109V-4U consists of a 6"" long curved swing arm with open socket and vertical surface mounting base. There are two (2) pivoting points on the mount: one at the swing arm and base and one at the center of the open single socket. Each pivoting point allows a complete 360 degree rotation. The open socket will accommodate all RAM 1.5"" diameter ball component parts."

The RAM-111BT universal base has a short post connected at right angles to a flat 6.25 x 2 inch rectangular base. The base has many different combinations of pre-drilled holes which will match up to many electronic devices and mounts, including Marine GPS, CB Radios, Ham Radios, Gimbal Brackets and more. The small post on the base is designed to connect to the RAM-109 series arms. Included on the end of the post is a tightening knob for use when installed on the compatible RAM-109 series arm.

"The RAM-114DTMU deck and track flat surface base includes a socket compatible with RAM ROD and RAM-TUBE holders with a spline post. The RAM-114DTMU is designed to attach to Tite-Lok track systems with a 3.25"" width."

RAM Mounts RAM-162BU mounting kit