Showing 2950–2960 of 9438 results

Save time and trouble aligning BGR series racks for ganging

Fully enclosed top with inside dimensions measuring 15-7/8” wide by 14-1/2” deep, the TD Series drawers feature spring-loaded latches and rugged, straight-forward construction. Installed keylock option available. 2, 3 and 4 space models include drawer mat and rear cable grommet at no extra charge!

Fully enclosed top, with spring latch; includes matFully enclosed top with inside dimensions measuring 15-7/8” wide by 14-1/2” deep, the D Series drawers feature spring-loaded latches and rugged, straight-forward construction. 2, 3 and 4 space models include drawer mat and rear cable grommet at no extra charge!

EIA/TIA compliant low profile sliding shelf shall be Middle Atlantic Products model # SSL. SSL shall be constructed of the following materials: shelf shall be made with an attractive black laminate material and rear-mounting brackets shall be 16-gauge steel. Full-extension, nylon roller slides shall extend 10”. Shelf area shall be 16” W x 13-3/4” D. Maximum weight capacity shall be 35 lbs. SSL shall be UL Listed in the US and Canada. Low profile sliding shelf shall be GREENGUARD Indoor Air Quality Certified for Children and Schools. Low profile sliding shelf shall be RoHS EU Directive 2002/95/EC compliant. Low profile sliding shelf shall be manufactured by an ISO 9001 and ISO 14001 registered company. Low profile sliding shelf shall be warrantied to be free from defects in material or workmanship under normal use and conditions for a period of three years.

Triple hinged, full width carrier for reliable cable support

Specify an SRSR for easy rear access to equipment connections in millwork, cabinets and flush in-wall installations. Available with a 19” or 23” useable depth, the SRSR system extends and rotates 90º in either direction, making it ideal for smaller systems.

Specify an SRSR for easy rear access to equipment connections in millwork, cabinets and flush in-wall installations. Available with a 19” or 23” useable depth, the SRSR system extends and rotates 90º in either direction, making it ideal for smaller systems.

Specify an SRS for rear access to equipment connections in millwork and cabinets. System extends a full 19” but does not rotate. Good for smaller millwork and in-wall installations.

Specify an SRS for rear access to equipment connections in millwork and cabinets. System extends a full 19” but does not rotate. Good for smaller millwork and in-wall installations.

"Designed to provide the same cable management facilities as our standard riser bases the SRB Series riser bases have been seismic certified to the following codes and standards: 2007 & 2010 CBC; 2006, 2009 & 2012 IBC; ASCE 7-05 (2005 Edition) & ASCE 7-10 (2010 Edition) and the 2006 & 2009 editions of NFPA 5000 for use in areas of high seismicity – Zone 4 or Seismic Design Category (SDC) “D”. These are designed for Mission Critical and/or High-Importance Installations in locations with the highest level of seismicity and top floor or rooftop installations including those within UBC and CBC Essential facilities or IBC, ASCE 7, and NFPA 5000 Seismic Use Group III facilities. For all codes, the Importance factor (Ip) is 1.5. Seismic Certified load capacity of 1,000 lbs (1 Bay), 1,750 lbs (2 Bay), and 2,450 lbs (3 Bay) when used with the appropriate seismic floor anchor brackets. With a standard 24"" height (custom heights from 9""-24""available upon request), these riser bases are constructed of rugged 11-gauge steel. OSHPD approved for fixed equipment anchorage in California healthcare facilities. Available for select enclosures, these riser bases require the use of seismic brackets."