Showing 330–340 of 360 results

Solution for extending power, communication & A/V with 3.5MM Audio CableMounts directly to the InteGreat™ Series A/V Table Box or to the underside of the conference room table using the TBCRHMK. Loaded with 12' [3.66m] of audio cable that extends out 5' [1.52m] from the retractor. Retractor has a female input from building infrastructure, and a male connector on the output side.Ready for Use– Cable Retractors come pre-wired with an input connector and an installed pull-out cable.Extended Cable Length– Cables pull out up to 5’ in length to easily reach nearby equipment.Multiple Formats– Available with Cat 6, HDMI, VGA, and 3.5 mm audio cable and connectors.Easy Installation– Retractors connect easily to the Table Boxes without tools and are ready to use. In addition, the cable retractors can be attached to the underside of any work surface stack multiple cable retractors and use with table grommets.

Loaded with 12' [3.66m] of DisplayPort cable that extends out 5' [1.52m] from the retractor.Mounts directly to the InteGreat™ Series A/V Table Box or to the underside of the conference room table using the TBCRHMK. Loaded with 12' [3.66m] of DisplayPort cable that extends out 5' [1.52m] from the retractor. Retractor has a female input from building infrastructure, and a male connector with latch on the output side. Cable supports High Bit Rate (HBR) bandwidth and up to a 4K resolution. Built to DisplayPort 1.2 standards, meeting the requirements of high performance applications.Interlocking Innovation- Up to five retractors can mount on the side of the InteGreat A/V Table Box with no extra fasteners.Properly Protected and Well Organized- Provides up to 5' [1.525m] of retractable DisplayPort cable, allowing users to pull out cables for easy connectivity. .

Solution for extending power, communication and A/V with HDMIMounts directly to the InteGreat™ Series A/V Table Box or to the underside of the conference room table using the TBCRHMK. Loaded with 12' [3.66m] of HDMI cable that extends out 5' [1.52m] from the retractor. Retractor has a female input from building infrastructure, and a male connector on the output side. Input side has mounting tab that allows installer to cable tie HDMI to the retractor to minimize chances of a loose connection.Ready for Use– Cable Retractors come pre-wired with an input connector and an installed pull-out cable.Extended Cable Length– Cables pull out up to 5’ in length to easily reach nearby equipment.Multiple Formats– Available with Cat 6, HDMI, VGA, and 3.5 mm audio cable and connectors.Easy Installation– Retractors connect easily to the Table Boxes without tools and are ready to use. In addition, the cable retractors can be attached to the underside of any work surface stack multiple cable retractors and use with table grommets.

Streamline power & technology connections up to the work area. Wiremold Meeting Room Solutions provide an integrated 'last meter' solution for bringing power and technology closer to the user's work area. Current trends in workplace design are allocating more open space for meetings. Those trends present a challenge for routing and managing cables from the infrastructure to the point-of-use, as well as providing ready accessibility for future technology upgrades. Meeting Room Transition Channel (MRTC) and Under Table Cable Management (UTCM) were designed as part of a flexible, integrated solution set that manages cabling and connections for power, communications and A/V from the building infrastructure to the work surface. Multi-service integrated solutions - Wiremold Meeting Room Solutions work in tandem with a variety of Wiremold pathway solutions such as OFR Series Overfloor Raceway, Fire-Classified Poke-Thru Devices and Work Surface Portals to manage A/V, communications and power cords and cables from the infrastructure to the point-of-use for a truly integrated set of solutions. Ease of ordering - UTCM and MRTC are offered in convenient kits with everything needed to complete the installation. The UTCM kit comes with 5' [1.524mm] base, 5' [1.524mm] rail and latching clips; while the MRTC kit comes with an adjustable boot, channel, mounting spine and transition covers for smooth cable egress. Ultimate flexibility - UTCM is easy to cut to length to adapt to a variety of table lengths and MRTC adjusts to a variety of table heights making installation quick and easy. Adaptability - Meeting Room Solutions are designed to allow for convenient clean up of existing tables with little or no disruption to the connected cords and cables. Easy to maintain - Future technology upgrades or room reconfigurations are completed with the least disruptions with an easy opening boot and channel on MRTC and the designed-in retaining dividers of UTCM. .

Allows retractor to mount horizontally under a conference room table, so cable can be accessed through a table grommet. Allows retractor to mount horizontally under a conference room table, so cable can be accessed through a table grommet. .

Solution for extending power, communication & A/V with Category 6 Cable Mounts directly to the InteGreat™ Series A/V Table Box or to the underside of the conference room table using the TBCRHMK. Loaded with 12' [3.66m] of audio cable that extends out 5' [1.52m] from the retractor. Retractor has a female input from building infrastructure, and a male connector on the output side. Ready for Use – Cable Retractors come pre-wired with an input connector and an installed pull-out cable. Extended Cable Length – Cables pull out up to 5’ in length to easily reach nearby equipment. Multiple Formats – Available with Cat 6, HDMI, VGA, and 3.5 mm audio cable and connectors. Easy Installation – Retractors connect easily to the Table Boxes without tools and are ready to use. In addition, the cable retractors can be attached to the underside of any work surface stack multiple cable retractors and use with table grommets.

Loaded with 12' [3.66m] of USB 2.0 cable that extends out 5' [1.52m] from the retractor. Mounts directly to the InteGreat™ Series A/V Table Box or to the underside of the conference room table using the TBCRHMK. Loaded with 12' [3.66m] of USB 2.0 cable that extends out 5' [1.52m] from the retractor. Retractor has a female Type A input from building infrastructure, and a male Type A connector on the output side. Input side has mounting tab that allows installer to cable tie USB connector to the retractor to minimize chances of a loose connection. Built in booster consumes 100mA from the USB port of the computer to extend signals beyond the 5 meter length limitation. Maximum data transfer rate of 480Mbps. Interlocking Innovation - Up to five retractors can mount on the side of the InteGreat A/V Table Box with no extra fasteners. Properly Protected and Well Organized - Provides up to 5' [1.525m] of retractable USB 2.0 cable, allowing users to pull out cables for easy connectivity. .

Solution for extending power, communication and A/V with VGA CableMounts directly to the InteGreat™ Series A/V Table Box or to the underside of the conference room table using the TBCRHMK. Loaded with 12' [3.66m] of VGA cable that extends out 5' [1.52m] from the retractor. Retractor has a female input from building infrastructure, and a male connector on the output side.Ready for Use– Cable Retractors come pre-wired with an input connector and an installed pull-out cable.Extended Cable Length– Cables pull out up to 5’ in length to easily reach nearby equipment.Multiple Formats– Available with Cat 6, HDMI, VGA, and 3.5 mm audio cable and connectors.Easy Installation– Retractors connect easily to the Table Boxes without tools and are ready to use. In addition, the cable retractors can be attached to the underside of any work surface stack multiple cable retractors and use with table grommets.

Humanscale NeatTech Desk Cable basket Gray 1 pc(s)

Humanscale NeatTech Desk Cable basket Black 1 pc(s)