Showing 180–190 of 325 results

J-Hooks: An Inexpensive Alternative to Cable TraysThese two-inch wall-mount J-hooks are recommended for setting up network or digital signage installations that require cabling to be run along walls, ceilings and raised floors for long distances. NCM-JHW20-25 comes with 25 wall-mount J-hooks.Designed to Accommodate a Wide Assortment of Cable TypesLess expensive and more flexible than cable trays or ladder rack runways, these J-hooks accommodate Cat5e/6/6a, fiber optic, audio/video, coaxial and other cable types. They comply with TIA-56B-C, TIA-569-C and ISO/IEC 14763-2 requirements for structured cabling systems, making them a perfect accessory for contractors, IT staff and cable installers.Made from Galvanized Steel to Provide Proper Long-Term SupportThese easy-to-install J-hooks are made from 18-gauge galvanized steel with a zinc-plated finish. To give you an idea of their strength, they offer stress-free support for up to 90 Cat5e cables, 60 Cat6 cables or 35 Cat6a cables. Maximum weight capacity is 60 pounds. Built-in anchor points allow you to use cable ties (sold separately) to secure cabling in place.

J-Hooks: An Inexpensive Alternative to Cable TraysThese four-inch wall-mount J-hooks are recommended for setting up network or digital signage installations that require cabling to be run along walls, ceilings and raised floors for long distances. NCM-JHW40-25 comes with 25 wall-mount J-hooks.Designed to Accommodate a Wide Assortment of Cable TypesLess expensive and more flexible than cable trays or ladder rack runways, these J-hooks accommodate Cat5e/6/6a, fiber optic, audio/video, coaxial and other cable types. They comply with TIA-56B-C, TIA-569-C and ISO/IEC 14763-2 requirements for structured cabling systems, making them a perfect accessory for contractors, IT staff and cable installers.Made from Galvanized Steel to Provide Proper Long-Term SupportThese easy-to-install J-hooks are made from 18-gauge galvanized steel with a zinc-plated finish. To give you an idea of their strength, they offer stress-free support for up to 330 Cat5e cables, 220 Cat6 cables or 80 Cat6a cables. Maximum weight capacity is 60 pounds. Built-in anchor points allow you to use cable ties (sold separately) to secure cabling in place.

J-Hooks: An Inexpensive Alternative to Cable TraysThese two-inch batwing J-hooks are recommended for setting up network or digital signage installations that require cabling to be run above drop ceilings, below raised floors or through inner duct systems for long distances. NCM-JHC20-25 comes with 25 swiveling batwing J-hooks that attach to a threaded rod or ceiling wire.Designed to Accommodate a Wide Assortment of Cable TypesLess expensive and more flexible than cable trays or ladder rack runways, these J-hooks accommodate Cat5e/6/6a, fiber optic, audio/video, coaxial and other cable types. They comply with TIA-56B-C, TIA-569-C and ISO/IEC 14763-2 requirements for structured cabling systems, making them a perfect accessory for contractors, IT staff and cable installers.Made from Galvanized Steel to Provide Proper Long-Term SupportThese easy-to-install J-hooks are made from 18-gauge galvanized steel with a zinc-plated finish. To give you an idea of their strength, they offer stress-free support for up to 90 Cat5e cables, 60 Cat6 cables or 35 Cat6a cables. Maximum weight capacity is 60 pounds. Built-in anchor points allow you to use cable ties (sold separately) to secure cabling in place.

J-Hooks: An Inexpensive Alternative to Cable TraysThese 3/4-inch wall-mount J-hooks are recommended for setting up network or digital signage installations that require cabling to be run along walls, ceilings and raised floors for long distances. NCM-JHW08-25 comes with 25 wall-mount J-hooks.Designed to Accommodate a Wide Assortment of Cable TypesLess expensive and more flexible than cable trays or ladder rack runways, these J-hooks accommodate Cat5e/6/6a, fiber optic, audio/video, coaxial and other cable types. They comply with TIA-56B-C, TIA-569-C and ISO/IEC 14763-2 requirements for structured cabling systems, making them a perfect accessory for contractors, IT staff and cable installers.Made from Galvanized Steel to Provide Proper Long-Term SupportThese easy-to-install J-hooks are made from 18-gauge galvanized steel with a zinc-plated finish. To give you an idea of their strength, they offer stress-free support for up to 10 Cat5e cables, 15 Cat6 cables or five Cat6a cables. Maximum weight capacity is 60 pounds. Built-in anchor points allow you to use cable ties (sold separately) to secure cabling in place.

78 in. (2 m) | Slotted | Self-Extinguishing PVC | M1 Rated NF Fire ResistantThis 6.5 ft. (2 m) slotted cable management raceway neatly routes cables in your office or server room, while also concealing them to create a tidy and professional look.Professionally Organize & Route Cables with Slotted DesignThis cable management raceway protects cables from damage while neatly routing them in your office or server room. The raceway is 2 in. (50 mm) x 2 in. (50 mm), with 0.3 in. (8 mm) parallel slots (finger ducts) to pull cords through so you can easily organize and route cables in and out of the raceway.Hassle-Free InstallationThe raceway features mounting holes (15mm x 5mm) that enable you to easily mount the raceway to wood or drywall using screws (not included).Industrial StrengthMade from self extinguishing PVC, that's sturdy and warp proof this network/power cable hider/concealer is M1 Rating NF fire resistant with a 186F (86C) Vicat softening point and are UL/94V-0 Rated.This cable management raceway is TAA compliant and backed by a StarTech.com 2-year warranty and free 24/5 technical support. StarTech.com has been the IT professionals choice for over 30 years.The StarTech.com Advantage

39.37 in. (1 m) |Adhesive Tape | Self Extinguishing PVC | M1 Rated NF Fire ResistantThis 3.3 ft. (1 m) cable management raceway with adhesive tape neatly routes cables in your office or server room, while also concealing them to create a tidy and professional look.Professionally Organize & Route CablesThis cable management raceway protects cables from damage while neatly routing them in your office or server room. The raceway is 0.4 in. (11 mm) x 0.7 in. (19 mm).Hassle-Free InstallationWith an adhesive backing, the cable raceway can be installed by simply peeling off the protective backing and sticking it to your desired location on any surface, including wood, drywall, glass or masonry.Industrial StrengthMade from self extinguishing PVC, that's sturdy and warp proof this network/power cable hider/concealer is M1 Rating NF fire resistant with a 186F (86C) Vicat softening point and are UL/94V-0 Rated.Give Your Raceway a Finished Look with these AccessoriesTo combine and route this cable management raceway and cap off the ends, StarTech.com offers a wide selection of raceway accessories.The Coupler (CBMWWD1911C) (20-Pack), joins two raceways together and extends the length of your raceway.The End Piece (CBMWWD1911E) (20-Pack), cleanly caps off the end of your raceway.The Inside Elbow (CBMWWD1911I) (20-Pack), joins two raceways together inside of corners at a 90 degree angle.The Lateral Elbow (CBMWWD1911L) (20-Pack), joins two raceways together and runs them up the wall at a 90 degree angle.The Outside Elbow (CBMWWD1911O) (20-Pack), joins two raceways together around corners at a 90 degree angle.The T Connector (CBMWWD1911T) (20-Pack), joins three raceways together in a T-bar.This cable management raceway is TAA compliant and backed by a StarTech.com 2-year warranty and free 24/5 technical support. StarTech.com has been the IT professionals choice for over 30 years.The StarTech.com Advantage

78 in. (2 m) | Slotted | Self-Extinguishing PVC | M1 Rated NF Fire ResistantThis 6.5 ft. (2 m) slotted cable management raceway neatly routes cables in your office or server room, while also concealing them to create a tidy and professional look.Professionally Organize & Route Cables with Slotted DesignThis cable management raceway protects cables from damage while neatly routing them in your office or server room. The raceway is 3 in. (75 mm) x 2 in. (50 mm), with 0.3 in. (8 mm) parallel slots (finger ducts) to pull cords through so you can easily organize and route cables in and out of the raceway.Hassle-Free InstallationThe raceway features mounting holes (15mm x 5mm) that enable you to easily mount the raceway to wood or drywall using screws (not included).Industrial StrengthMade from self extinguishing PVC, that's sturdy and warp proof this network/power cable hider/concealer is M1 Rating NF fire resistant with a 186F (86C) Vicat softening point and are UL/94V-0 Rated.This cable management raceway is TAA compliant and backed by a StarTech.com 2-year warranty and free 24/5 technical support. StarTech.com has been the IT professionals choice for over 30 years.The StarTech.com Advantage

100 Pack| Self-Adhesive | 6 Segment | Extinguishing PVC | M1 Rated NF Fire ResistantThese self-adhesive multi-segment cable clamps enable you to conveniently secure and route up to six cables to one spot at any workstation. The cables are held in place by their connector ends and can then be pulled through the clip so you can easily connect them to your devices. Then, if you disconnect your device you can rest assured the cables will stay in place for the next time you connect your device. 100 black cable clips are included, ensuring you'll have plenty on hand for mass deployment.Easy to Install and UseThe with an adhesive backing, the cable clamp can be installed by simply peeling off the protective backing and sticking it to your desired location on any surface, including plastic, metal, wood, or glass.Once installed the clamps can hold up to six cables, each in individual cable slots, providing an ideal solution to organize cables at your workstation and reduce cable clutter, while also preventing cables from falling off your desk. The clamp is equipped with a clip that opens, making it easy to change or rearrange the cables or wires that are contained within it.Industrial Design for Reliability and SafetyThe 6 segment cable clamp is made of a durable nylon 66 material, and features a strong 3M adhesive sticky backing with a versatile one piece design. The cable holders are also UL94 V-2 fire rated and UL approved to ensure they're safe for industrial use.These cable clamps are TAA compliant and backed by a StarTech.com Lifetime warranty and free 24/5 technical support. StarTech.com has been the IT professionals choice for over 30 years.The StarTech.com Advantage- 100 PACK SELF ADHESIVE CABLE MANAGEMENT CLIPS: Organize up to 6 cables w/ individual bundle diameters from 9.2 mm (0.36 in) to 14.9mm (0.59 in); cable comb installs w/ 3M adhesive backing - INDUSTRIAL STRENGTH: Desktop USB/computer/Ethernet cord organizer is made of durable black nylon 66 material; featuring a strong 3M adhesive sticky backing these cable holders are UL94 V-2 fire rated- VERSATILE ONE PIECE DESIGN: Clamp opens up making it easy to change cables; great for charging cables, power cables, USB cables, docking cables, audio, video, network and data cables

19.68 in. (50 cm) | 0.56 in. (14.4 mm) | 0.8 in (20.4 mm) | Nylon 66 | UL 94V-2 Rated | TAAThis 20.6 in. (52.4 cm) flexible cable management spine/vertebrae raceway offers a flexible solution for neatly routing cables at your workstation to create a tidy and professional look.Professionally Organize & Route CablesThis cable management raceway protects cables from damage while neatly routing them. The raceway is 0.6 in. (14 mm) x 0.8 in. (20 mm). Featuring individual loops that makes it easy to add, remove and organize cables within the raceway.Easily Expandable with Built-in ConnectorsThe built-in raceway connectors make it easy to create long cable runs by latching several raceways together. Each raceway features mating connectors at each end, enabling you customize the length of the raceway to meet your specific application.Hassle-Free InstallationThe raceway features 0.5 in. (12.2 mm) x 0.2 in. (4.7 mm) mounting holes that enable you to easily mount the raceway to wood or drywall using screws (not included).Industrial StrengthMade from durable Nylon 66 this network/power cable router/organizer is flexible and UL/94V-2 Rated.This cable management raceway is TAA compliant and backed by a StarTech.com 2-year warranty and free 24/5 technical support. StarTech.com has been the IT professionals choice for over 30 years.The StarTech.com Advantage

78 in. (2 m) | Slotted | Self-Extinguishing PVC | M1 Rated NF Fire ResistantThis 6.5 ft. (2 m) slotted cable management raceway neatly routes cables in your office or server room, while also concealing them to create a tidy and professional look.Professionally Organize & Route Cables with Slotted DesignThis cable management raceway protects cables from damage while neatly routing them in your office or server room. The raceway is 2 in. (50 mm) x 3 in. (75 mm), with 0.3 in. (8 mm) parallel slots (finger ducts) to pull cords through so you can easily organize and route cables in and out of the raceway.Hassle-Free InstallationThe raceway features mounting holes (15mm x 5mm) that enable you to easily mount the raceway to wood or drywall using screws (not included).Industrial StrengthMade from self extinguishing PVC, that's sturdy and warp proof this network/power cable hider/concealer is M1 Rating NF fire resistant with a 186F (86C) Vicat softening point and are UL/94V-0 Rated.This cable management raceway is TAA compliant and backed by a StarTech.com 2-year warranty and free 24/5 technical support. StarTech.com has been the IT professionals choice for over 30 years.The StarTech.com Advantage