Showing 5310–5320 of 29094 results

For voice/data/video distribution, this cable will handle bandwidth-intensive applications up to 125 MHz. Meets ANSI/TIA-568-C.2 Cat5e standard and the stringent TAA compliance requirements for anyone who needs to procure products exclusively manufactured in countries on the Trade Agreement Act list. Each of the individual pairs is bonded together to help maintain the twist-spacing throughout the line right up to the termination point. Constructed from high-quality cable and a shortened body plug, this design minimizes Near-End Crosstalk (NEXT) levels. Available in a variety of colors to easily color-code your network installation.

Today's advanced fast ethernet and gigabit computer networks require Enhanced Category 5 high-speed cabling to distrubute data, voice and video. Cables To Go's Enhanced Cat5 350Mhz Patch Cables will keep you ahead of the game. These cables will handle bandwidth intensive applications up to 350 Mhz and beyond. Each meets all Cat 5e TIA/EIA standards, and drastically reduce both impedance and structural return loss (SRL) as compared to standard 100 Mhz wire! Constructed with high-quality cable and a shortened body plug, this design will keep Near-End Crosstalk (NEXT) levels to a minimum. Cables To Go 350Mhz Patch cables are available in a variety of colors to easily color-code your network installation.- Connector: 50-micron gold plated RJ-45 Male to Male - Conductor: 4-pair 24 AWG Stranded Copper - Jacket: PVC Applications: - 1000 BASE-T; 100 BASE-T; 10 BASE-T (IEEE 802.3) - 4/16 Mbps Token Ring (IEEE 802.5); 100 VG-AnyLAN - 100 Mbps TP-PMD (ANSI X3T9.5); 55/155 Mbps ATM - Voice- Designed For: Network Adapters, Hubs, Switches, Routers, DSL/Cable Modems, Patch Panels and other twisted-pair applications - Exceeds Category 5e specifications - Wired: TSB 568B (AT&T 258A) - Certification: TIA/EIA

Digital Visual Interface (DVI) is the standard interface for a high-performance connection between PCs and flat panel displays, digital CRT displays, projectors, and HDTV. DVI Adapters from Cables To Go deliver the high-performance, high-bandwidth interface needed for video displays of today while leaving headroom for the products of tomorrow. These precision-engineered adapters are fully compliant with the DVI standard defined by DDWG (Digital Display Working Group). The DVD-D dual link configuration provides enough bandwidth for resolutions up to 2048 x 1536 and is designed for high-speed digital use.

The Flexima UXGA + 3.5mm cable delivers high performance AND flexibility. This ultra-thin cable is highly flexible to make installation in even the tightest areas a breeze. Unlike cheap VGA cables, the Flexima cable will not coil or snag during installation. And, the low profile connector (1.25in width x 1.1in depth) helps you install this cable in places other connectors won't allow. Quality is also proven in the performance of these cables. Featuring double-shielded twisted pairs, and triple-shielded coax, this monitor cable delivers the signal without ghosting or distortion. The 3.5mm breakout cable (18in long) enables installation with most laptop and desktop configurations.Use it for video presentations, home theater and HDTV applications, classroom environments, POS devices, and server rooms. Or simply organize your work area for maximum comfort and efficiency. Will accommodate cable runs up to 100 feet without a booster (in most cases). CL3-rated for in-wall installation.

Impact Acoustics Pro-Audio Cables are made from twisted pair audio cable under an aluminum foil for maximum shielding from noise. High flexibility, 7mm PVC jacket reduces the risk of cables kinking and damaging the conductors. Bright nickel plating on solid brass connectors resists wear from reconfiguring and moving equipment from one venue to another. Spring strain relief on the 1/4in plug and a chuck strain relief inside the XLR reduce the effects of age on the solder joints and contacts. - 22AWG twisted pair construction - Foil shield and 60% copper braid - Nickel plated brass connectors - Connect unbalanced sources to balanced XLR inputs

Velocity™ 3.5mm Mono Cables from Impact Acoustics are specifically designed to provide quality signal transfer for mono audio and data transfer applications. The 3.5mm cable lets you connect components utilizing a 3.5mm serial data jack such as whole house automation systems or any mono audio device such as a phone system. These cables feature a 27-gauge Oxygen Free Copper conductor, a drain wire, and an Aluminum Foil Shield to reject noise, and Gold plated connectors to ensure a quality connection. - Connectors: 3.5mm Mono Male to 3.5mm Mono Male - Fully molded connectors provide strain relief - Foil shielded to prevent unwanted EMI/RFI interference - Gold-Plated connectors

Value Series Component Video Cables are the ideal choice for connecting high definition DVD players and high-end televisions. These cost-conscious cables are high quality and deliver a crisp, clear picture for less. The cable's shielding helps reduce unwanted noise and distortion. Nickel plated connectors ensure long lasting, corrosion-free connections to your equipment. The color-coded molded connectors attach to an ultra-flexible jacket allowing for easy installation and identification. Component Video Cables are able to bypass the TV’s Y/C separator and color decoder, routing the color (Y Pr Pb ) information directly into the TVs matrix decoder. By sending the pure DVD component video signal directly to a component video input-equipped display device, the DVD signal forgoes the extra processing that normally would degrade the image. The result is a vastly increased image quality, with incredibly lifelike colors and crisp detail. - Connectors: RCA Plug x3 to RCA Plug x3 - Ultra-flexible jacket for easy installation - Fully-molded connectors provide excellent strain relief - Provides video signal transfer between DVD players and televisions or projectors - Color-coded connectors: Red, green, blue

Build VGA functionality into a custom system in the form of a secure and efficient fixed port. Provide access to a PC, monitor, or projector with minimal exposure or repositioning. From connections at podiums and kiosks to wall plate mounting, panel mount cables are a great way to keep your connections clean and professional. Featuring molded screw-style connectors and SXGA compatibility, these cables are available in various lengths to meet your exact specifications. Features:- Connectors: HD15 female to HD15 male- Molded hood provides easy connection to a faceplate or machined port- Constructed of premium grade shielded video cable which uses a combination of coax and twisted pair- Accommodates cable runs up to 100ft without a booster (in most cases)- Ideal for video presentation devices, video splitters, and KVM switches- Includes one pair of 4-40 screws and nuts

This extension cable is an ideal solution for adding length to an existing Mini DisplayPort cable or extending the fixed Mini DisplayPort cable of a computer monitor. This cable carries a digital audio/video signal. Built to DisplayPort 1.2 standards, this cable meets the requirements of high performance applications.

The High Speed HDMI Cable with Built-In Power Inserter 4K60 is the ideal solution for supporting HDMI bus-powered devices such as extenders, active cables, AOC cables or signal-sensing switches. This cable eliminates the need for separate voltage inserters or adapters, which increases reliability.PowerThe power supplies associated with source devices such as computers, teleconferencing codecs, media players and set-top boxes are designed, according to HDMI standards, to deliver a 55mA hot plug supply. When an accessory demands more current than the source can supply, the system may fail to operate dependably. Insufficient power may manifest as a flashing image (HDCP problem), distorted video (EDID related issues), or even a complete loss of the image (hot plug assertion failure). The HDMI Cable with Built-In Power Inserter allows for the necessary and proper voltages for the hardware “handshake”, HDCP key authentication and exchange, EDID information exchange and hot plug connection detect.PerformanceThe attached power inserter isolates the power from the source device and provides dedicated power to support HDMI switching, splitting, and extension accessories. If an installation leverages active cables with embedded chipsets, embedded electronic-to-optical media conversion, signal-sensing, auto-switching or similar devices, then this power inserter will be a critical performance element.