Showing 4590–4600 of 29094 results

With Cables To Go's Cat6 550Mhz Snagless Patch Cables you can stay ahead of the game with the use of this high-speed cabling to distribute data, voice and video. These cables will deliver stable performance to 550 MHz. Each meets EIA/TIA Cat 6 TIA/EIA- 568-B-2.1, draft 9 standards. These cables will handle bandwidth intensive applications up to 550 Mhz and beyond and drastically reduce both impedance and structural return loss (SRL) as compared to standard 100 Mhz wire! Constructed with high-quality cable and a shortened body plug, this design will keep Near-End Crosstalk (NEXT) levels to a minimum. The molded, snag-free boot prevents unwanted cable snags during installation and provides strain-relief. Cables To Go Cat6 550Mhz Snagless Patch Cables are available in a variety of colors to easily color-code your network installation. - Connector: 50-micron gold plated RJ-45 Male to Male - Conductor: 24 AWG Stranded Copper - Jacket: PVC - Molded, Snag-Free boot prevents unwanted cable snags Applications: - Gigabit 1000 BASE-T; 100 BASE-T; 10 BASE-T (IEEE 802.3) - 4/16 Mbps Token Ring (IEEE 802.5); 100 VG-AnyLAN - 100 Mbps TP-PMD (ANSI X3T9.5); 55/155 Mbps ATM - Voice; T1 - High bandwidth applications such as 622 ATM, Wideband- Designed For: Network Adapters, Hubs, Switches, Routers, DSL/Cable Modems, Patch Panels and other twisted-pair applications - Standard: Category 6 TIA/EIA- 568-B-2.1, draft 9

"Fast, fast, fast - the three words that describe Cables To Go's Cat6 network cables. Perfect for distributing data, voice and video, these 550MHz rated patch cables ensure you always have the necessary throughput to handle today's and tomorrow's bandwidth-intensive applications. Each cable is fully tested and quality inspected, ensuring all EIA/TIA Cat 6 TIA/EIA- 568-B-2.1, draft 9 standards are met. Note: These cables are for 10/100 ethernet only and wil not work for gigabit ethernet since only two pairs of this cable are crossed. Cat6 patch cords from Cables To Go drastically reduce both impedance and structural return loss (SRL) as compared to standard 100 Mhz wire, which ensures error-free transmission! Constructed with high-quality cable and a shortened body plug, this design will keep Near-End Crosstalk (NEXT) levels to a minimum. Our all-new molded, snag-free ""clip"" prevents unwanted cable snags during installation without impairing your ability to insert and remove the connector from the port. It also provides unparalleled strain-relief, so that the cable is not damaged even when pulled on excessively. - Connector: 50-micron gold plated RJ-45 Male to Male - Conductor: 24 AWG Stranded Copper - Jacket: PVC - All-new molded, snag-free boot prevents unwanted cable snags while providing easy insertion and extraction from network ports - Crossed pin configuration allows you to connect two computers ""peer-to-peer"" without the need for a hub or switch - Perfect for connecting network switches and hubs without an uplink port to other switches and hubs"

"Fast, fast, fast - the three words that describe Cables To Go's Cat6 network cables. Perfect for distributing data, voice and video, these 550MHz rated patch cables ensure you always have the necessary throughput to handle today's and tomorrow's bandwidth-intensive applications. Each cable is fully tested and quality inspected, ensuring all EIA/TIA Cat 6 TIA/EIA- 568-B-2.1, draft 9 standards are met. Note: These cables are for 10/100 ethernet only and wil not work for gigabit ethernet since only two pairs of this cable are crossed. Cat6 patch cords from Cables To Go drastically reduce both impedance and structural return loss (SRL) as compared to standard 100 Mhz wire, which ensures error-free transmission! Constructed with high-quality cable and a shortened body plug, this design will keep Near-End Crosstalk (NEXT) levels to a minimum. Our all-new molded, snag-free ""clip"" prevents unwanted cable snags during installation without impairing your ability to insert and remove the connector from the port. It also provides unparalleled strain-relief, so that the cable is not damaged even when pulled on excessively. - Connector: 50-micron gold plated RJ-45 Male to Male - Conductor: 24 AWG Stranded Copper - Jacket: PVC - All-new molded, snag-free boot prevents unwanted cable snags while providing easy insertion and extraction from network ports - Crossed pin configuration allows you to connect two computers ""peer-to-peer"" without the need for a hub or switch - Perfect for connecting network switches and hubs without an uplink port to other switches and hubs"

Product Features- Connect the USB-B port of a printer, hub or other device a USB Type-C port- Designed to support USB 2.0 communication and features- Backwards compatible with USB 2.0 and USB 1.1 devices- Color coded white and labeled to designate USB 2.0 feature supportProduct DescriptionThis USB 2.0 USB-C to USB-B cable is the perfect solution for connecting a printer, hub, or other device that has a USB B port to a computer, tablet or other device that has a USB Type-C port for USB 2.0 communication. The color coded USB Type-C connector allows this cable to be easily identified as a USB 2.0 cable and differentiated from other cables which may support a different feature set. The USB Type-C connector is smaller than traditional USB connector and features a symmetrical design which allows it to be easily connected on the first try. Additionally, the durability of the USB Type-C connector allows for up to 10,000 connection cycles. This cable supports a data rate up to 480Mbps for data transfer and sync with 5 volts and 1 amp of power for device operation and charging.

"Value Series RG6 F-Type Cables are constructed with 75ohm coaxial cable that delivers high-quality video images. Low-loss 75ohm copper-clad wire and polyethylene dielectric provides accurate picture resolution and color. A foil and double-braid shield protects against unwanted noise and interference. The molded connectors attach to a flexible jacket allowing for easy installation. The 24K gold plated heavy-duty connectors ensure long lasting, corrosion-free connections. Connect digital cable boxes, DSS receivers or any video source with F-type output connections to any TV with matching F-type input jacks. Ordinary, ""included in the box"" F-type cables often use low-quality materials with inferior shielding, which can result in poor picture quality. Our Value Series RG6 F-Type Cables deliver all the detail, color and brightness you expect from your audio/video components."

Velocity™ S-Video Interconnects from Impact Acoustics provide the perfect solution for connecting extended definition video recorders or digital satellite systems to your a/v receiver or television/monitor. Carefully designed dual 75-ohm precision video conductors ensure optimal video quality. Individually shielded Y (luminance) and C (chrominance) conductors are combined with an overall aluminum foil and OFC braid shield to protect against radio frequency interference (RFI) and electromagnetic interference (EMI). These cost-effective high-performance cables ensure maximum video quality when compared with s-video cables typically included with consumer electronics products. In addition to fitting standard 4-pin S-Video jacks, the Velocity S-video cable fits most 7-pin jacks found on desktop and notebook PC’s with a TV out jack. Features: - Connectors: 4-pin DIN Male to 4-pin DIN Male. - Oxygen-free copper wire delivers all the detail, color and brightness you expect from your S-video component. - Precision-made 24K gold-plated connectors ensure long-lasting sound quality. - Fully molded connectors provide excellent strain relief. - Individually double-shielded 75-ohm coax conductors protect against induced noise or distortion. - Ultra-flexible PVC jacket for easy installation. - Connects digital camcorders, satellite receivers, DVD players, PC with TV out or any video source with S-video output jacks to television, monitor or A/V receiver with S-video input jacks.

For voice/data/video distribution, this cable will handle bandwidth-intensive applications up to 550 MHz. Meets all Cat6 TIA/EIA-568-B-2.1, draft 9 standards, and drastically reduces both impedance and structural return loss (SRL) when compared to standard 100 MHz wire.Each of the individual pairs is bonded together to help maintain the twist-spacing throughout the line right up to the termination point.Constructed from high-quality cable and a shortened body plug, this design minimizes Near-End Crosstalk (NEXT) levels.The molded, snagless boot prevents unwanted cable snags during installation and provides extra strain relief. Available in a variety of colors to easily color-code your network installation.

When working in a wiring closet or a cabinet space is limited and cords can easily be misidentified and disconnected causing detrimental downtime. Perform maintenance tasks with confidence by using color power cords in a data environment allowing for quick and accurate identification of equipment.Power UpConnect PDUs to servers, switches, or other data center equipment. This cable can deliver 15 Amps up to 250 Volts to any connected device ensuring correct operating powerLevel UpEach color power cable is constructed to the highest industry standards, to ensure high-quality installs and deliver the stability and durability that is needed for reliable network performance.Maintain ExcellenceAllow IT technicians to perform maintenance tasks with confidence and easily locate equipment based on functionality or location, saving both time and money using color coded power cables.

AC Power Cords Universal and computer power supply cords, including extension cords, monitor AC power adapter cords, TV AC power cord, monitor and printer AC power cables, and European power cords. Color power cords are available in C14 to C13 or C20 to C19 format. Available in 7 colors. Red, Orange, Yellow, Green, Blue, White, and Black

The DVI-D Male to HDMI Male adapter is perfect solution for repurposing a DVI-D extension cable for use with an HDMI display. The adapter is compact and designed for minimal signal loss. The passive design of this adapter allows it to support video resolutions of up to 1080p.