Showing 150–160 of 5191 results

Tripp Lite SmartPro Line Interactive UPS with enhanced LCD interface offers network-grade power protection for critical server, network and telecommunications equipment. Line Interactive Uninterruptible Power Supply (UPS) with built-in Auto-Voltage Regulation (AVR) actively corrects brownouts and overvoltages back to usable levels while maintaining a full battery charge in case of power failure. Interactive LCD interface reports UPS operating mode, detailed UPS and site-power data, plus enables a variety of UPS setup and configuration options. Super-fast switchover from line to battery power occurs within milliseconds to maintain operation of connected equipment without interruption or reboot. 95% line-mode efficiency offers reduced heat emissions and operating costs. Network management interfaces support communications via USB, RS-232 and Pre-installed SNMPWEBCARD network interface. HID-compliant USB port enables integration with built-in power management and auto shutdown features of Windows and Mac OS X. Network communications ports enable detailed monitoring of equipment load levels, self-test data and utility power conditions. Includes PowerAlert monitoring software and complete cabling. Switched output load banks enable scheduled and real-time remote reboot and load shedding of select outlets. Emergency Power Off (EPO) interface. LCD display panel easily rotates for viewing in rackmount or tower configurations. Audible alarm with push-button momentary alarm-cancel and silent-mode configuration options. Programmable self-test. Field-replaceable, hot-swappable battery modules.- Tripp Lite SMART1500RM2UN line interactive 2U rack/tower UPS with 1500VA / 1.5kVA / 1350W capacity- Line interactive UPS with Automatic Voltage Regulation (AVR) corrects brownouts and overvoltages from 83 to 147V- NEMA 5-15P input plug; 6 NEMA 5-15R output receptacles, Two independently switchable output load banks- Maintains uninterrupted operation of connected networking equipment during blackouts, surges, brownouts and overvoltages- High 95% efficiency rating in line-power mode offers reduced power consumption and BTU emissions- Internal batteries offer 13 minutes at 50% load (675W) and 4.5 minutes at 100% load (1350W)- Hot-swappable, user-replaceable internal batteries can be replaced with no disruption to connected equipment- Front panel LCD monitoring screen with MODE and ENTER buttons reports operating mode with 5-bar battery charge graphic, plus 7 selectable screens of detailed UPS and site power information- LCD interface also supports a number of advanced user setup and operating preferences- Ships with 4 post rackmount installation hardware; Optional 2POSTRMKITWM enables 2 post rackmount/wallmount installation; Optional 2-9USTAND enables tower placement- Built-in USB, RS-232 and pre-installed SNMPWEBCARD accessory- HID-compliant USB port enables integration with built-in power management and auto shutdown features of Windows and Mac OS X- Included PowerAlert UPS monitoring software; Built-in Emergency Power Off (EPO) interface with cable

Rack PDU 2G, Metered, ZeroU, 20A, 100-120V, (24) 5-20RAPC Metered Rack Power Distribution Units (PDUs) provide active metering to enable energy optimization and circuit protection. User-defined alarm thresholds mitigate risk with real-time local and remote alerts to warn of potential circuit overloads. Metered Rack PDUs provide power utilization data to allow Data Center Managers to make informed decisions on load balancing and right sizing IT environments to lower total cost of ownership. Metered Rack PDUs include real power monitoring, a temperature/humidity sensor port, locking IEC receptacles, and ultra low profile circuit breakers. Users can access and configure Metered Rack PDUs through secure Web, SNMP, or Telnet Interfaces which are complimented by APC Centralized Management platforms using InfraStruxure Central, Operations, Capacity, and Energy Efficiency.Includes : Installation guide , Rack Mounting brackets , Safety guide , Serial configuration cableLocal Current Monitoring DisplayThe aggregate current draw per power distribution unit is displayed on the unit via a digital display. The local digital display helps installers avoid overloaded circuits by providing a visible warning when the current draw is close to the maximum amperage draw of the strip.Load indicator LEDIndicates overload and warning conditions based on the user-defined alarm thresholds. Alerts users of potential overloaded circuits.Local and web-based monitoringStatus available to customers both in the data center and remotelyAlarm ThresholdsDefine alarm thresholds in order to avoid overloaded circuits. Network and visual alarms inform the user of possible problems.Wide range of input and output connectionsProduct family includes a variety of input and output connections to distribute 120V, 208V, or 230V power to multiple outlets. Having a variety of inputs and outputs allow users to adapt to varying power requirements. APC offers units that bring up to 14.4kW using a single branch whip.Alarm ThresholdsDefine alarm thresholds in order to avoid overloaded circuits. Network and visual alarms inform the user of possible problems. (Note: Only available on units with the current monitoring capabilities. Please see SKU specifications for availability)Load indicator LEDIndicates overload and warning conditions based on the user-defined alarm thresholds. Alerts users of potential overloaded circuits.Remote Management CapabilitiesFull-featured network management interfaces that provide standards-based management via Web, SNMP, and Telnet. Allows users to access, configure, and manage units from remote locations to save valuable time. Associated with this feature is the ability to quickly and easily upgrade the firmware via network download to installed units for future product enhancements.Local Current Monitoring DisplayThe aggregate current draw per rack PDU is displayed on the unit via a digital display. The local digital display helps installers avoid overloaded circuits by providing a visible warning when the current draw is close to the maximum amperage draw of the strip. (Available on designated SKUs only)Integrates with StruxureWare Data Center ExpertAn IT-ready, scalable access monitoring system that collects, organizes, and distributes critical alerts, surveillance video and key information, providing a unified view of complex physical infrastructure environments from anywhere on the networkFlash UpgradeableQuickly and easily upgrade firmware via network download for future product enhancements. Eliminates the need to replace products already installed in the field when new features are released. (Note: Networked units only)Rack-MountableIncludes horizontal, vertical, and toolless-mount varieties. Puts power where it is needed most - in the racks near the equipment.

Count on high power delivery that lasts longer than traditional chargers with the Targus® 100W GaN Wall Charger. Powered by effective GaN technology, this charger packs a powerful punch with 4 ports - 2 USB-C® (with a single port use up to 100W) and 2 USB-A with quick-charge capabilities supporting up to 18W - so you could essentially charge your work laptop, personal laptop, phone, and tablet at the same time. GaN charging is more efficient in power transfer, so it uses less energy and disperses less heat as it works. This means cooler and safer charging for you. Like all Targus products, this charger passes strict quality and safety standards and meets UL requirements.Whether you’re working at the office, the lobby, or in the airport lounge, it’s essential to be charged up for the journey. This charger is travel-friendly and comes with interchangeable plugs compatible with power outlets in over 140 countries in the Americas, Asia, Europe, and Australia. From its lightweight structure and slim, compact design, the charger won’t take up prime real estate in your space. Its US plug has foldable prongs making it easy to slip into your briefcase or backpack on-the-go.Powerful GaN TechnologyA modern alternative to traditional chargers, Gallium Nitride chargers don’t require as many components so they’re smaller and more efficient at transferring power, passing a high amount of wattage for longer durations. Not only are GaN chargers more compact and lighter in weight, but they produce less heat and run cooler than their silicon counterparts.Safety FirstThis charger is designed with protection from over-charging, over-voltage, over-current, and over-heating so you can charge your devices without worry. All Targus products pass third party compliance testing and have a fire-retardant rating which meets UL requirements.International Converters For TravelWherever your travels take you - whether for business or leisure - you can power up your devices virtually anywhere with the interchangeable pin converters and worldwide universal 100V–240V voltage. Plugs are compatible in 140+ countries in the Americas, Europe, Asia, and Australia.

Organize your rack mount power cords and protect your equipment from damaging electrical surges and lightning strikes.The RackBar Surge 12-outlet (6 Front and 6 Rear) rack mount surge suppressor provides 120V 15A output with built-in surge suppression. It distributes power to 12 NEMA 5-15R receptacles from a single NEMA 5-15P input. Designed for datacenters and other electrically demanding applications, this unit has a durable metal housing and a 15-foot AC power cord. It can be mounted either horizontally or vertically and includes a cord retention tray. The unit complies with fully-rated cable specifications reducing electromagnetic/radio frequency interference (EMI/RFI) and is ETL/RoHS certified. It is covered by a 3-year warranty that ensures this unit is free of defects in design, assembly, material or workmanship.

APC Smart-UPS X 750VA Rack/Tower LCD 120V with SmartConnect Port - Intelligent and efficient network power protection from entry level to scaleable runtime. Ideal UPS for servers, point-of-sale, routers, switches, hubs and other ... - Includes: Cat 5 Ethernet cable, Installation guide, Rack mounting brackets, Removable support feet, Smart UPS signalling RS-232 cable, USB cable, Warranty card

Field-replaceable NMCIntegrated Network Management Card/Display Module can be replaced in the field to minimize downtime disruption in the unlikely event of a failure.High Retention OutletsWith no special power cords required, high retention outlets provide up to twice the holding force to reduce risk of accidental disconnect on 9000 series PDUs.60C Operating TemperatureSelect 9000 series PDUs provide the ability to operate in a maximum ambient air temperature of 60C (140F) at full load ensuring reliability and availability even in today's high density deployments. Other models allow up to 45C (113F).C13/C15 and C19/C21 Hybrid OutletsAvailable on select 9000 series PDUs only, Industry 1st hybrid outlets allow 60C operating temperature at full load, are fully compatible with standard C14 and C20 power cords, and are future proofed for implementation of higher temperature rated devices requiring C16 and C21 power cords.Hydraulic Magnetic Circuit BreakersProvide increased availability by maintaining trip current over a wide temperature range.

Zebra PWR-BGA12V50W0WW power adapter/inverter Indoor Black

ROG Thor 1000W Platinum II is the quietest PSU in its class.The Quietest 1000W Power SupplyBack with a vengeance, the second iteration of the ROG Thor 1000W Platinum wields cooling and component upgrades that make it the quietest PSU in its class*. And to compliment the latest high-end ROG motherboards and bring additional flair to beastly rigs, we've added a mirrored side panel that neatly frames the OLED display.COOLINGROG HeatsinksROG heatsinks have 2x more volume than traditional designs, facilitating lower temperatures, longer component lifespan, and extended 0dB operation.Axial-tech Fan DesignA 135mm Axial-tech fan with PWM control delivers lower noise and keeps thermals in check.Dual Ball Fan BearingsThe fan impeller spins on a dual ball bearing setup that will last up to twice as long as a sleeve bearing design.0dB TechnologyTo reduce noise output, the PWM-controlled fan shuts off entirely when the PSU load is 50% or below.​Lambda A++ CertificationThor II cooling upgrades result in a coveted Lambda A++ noise rating, confirming the latest iteration wields menacing power in absolute stealth.ENGINEERING80 Plus Platinum CertificationThe ROG Thor 1000W Platinum II utilizes low-ESR Japanese capacitors to ensure efficient operation. These upgrades enable an 80 PLUS Platinum certification, which guarantees 89% efficiency at 100% load and 92% efficiency at 50% load. The increased efficiency results in less heat, reduces fan noise, and increases reliability.EXPERIENCEOLED Power DisplayThe built-in OLED panel makes it easy to tune your system for best performance and efficiency.Aura SyncCustomize the Aura ROG logo and/or add RGB lighting strips to accent your showcase build.* If the connector cable is not used, the default color effect is rainbow.* To enjoy Aura Sync, you’ll need an Aura Sync-compatible ASUS or ROG motherboard. Similarly, the Smart Mode lighting effect, which reflects GPU temperature, requires use of a compatible ASUS or ROG graphics card.Sleeved CablesA range of sleeved cables are bundled with Thor II, and we also provide a 20% CableMod discount.PCIe Gen 5.0 ReadyEach ROG Thor 1000W Platinum II PSU is bundled with a 12-pin PCIe cable that can pipe up to 450W of power to PCIe Gen 5.0 graphics cards. Get ready for the future of power delivery.10-year WarrantyThe ROG Thor 1000W Platinum II is backed with a 10-year* warranty.*Core product operation is guaranteed for 10 years. The OLED panel and RGB LEDs are subject to a 3-year warranty.

NZXT C1000 Gold power supply unit 1000 W 24-pin ATX ATX Black

The Lenovo Go USB-C Laptop Power Bank (20000 mAh) is a game-changing solution for remote workers who need access to a large reserve of power for their USB-C laptops and devices to achieve peak productivity. With a whopping 20,000 mAh capacity, you can rapidly charge multiple devices even while you are recharging the power bank.