Showing 60–70 of 224 results

"Tripp Lite's SMART1500LCDXL Line-Interactive UPS System offers network-grade voltage regulation, surge suppression and long-lasting battery support, ideal for network equipment, phone systems, desktop PCs and home entertainment systems. Uninterruptible Power Supply / UPS system provides battery derived AC output to maintain continuous operation of connected equipment without data-loss during power failures and severe voltage fluctuations. Runtime is expandable with one additional BP24V15RT2U external battery pack. Interactive LCD display offers detailed site voltage and UPS status information, plus a variety of UPS control options. High 97% efficient line power mode operation offers reduced UPS energy consumption and BTU heat output. Automatic Voltage Regulation / AVR circuits boost brownouts and reduce overvoltages from 75V to 147V to safe 120V nominal levels without using battery power. Included mounting accessories enable 2U horizontal rackmount installation in 2 and 4 post racks or upright tower installation. Built-in USB and DB9 serial port enables optional unattended system shutdown in case of extended power failure using PowerAlert UPS management software. HID-compliant USB interface enables integration with built-in power management and auto shutdown features of Windows and Mac OS X. Built-in data line surge suppression jacks offer protection for equipment with single-line dialup, DSL or network Ethernet connection.- SMART1500LCDXL Line Interactive UPS offers network-grade voltage regulation, surge suppression and long lasting battery support- Space-saving angled NEMA 5-15P input plug; 6ft / 1.8m line cord- 8 battery-supported NEMA 5-15R outlets- Maintains operation of connected equipment during power failures and voltage fluctuations- Runtime is expandable with one additional BP24V15RT2U external battery pack- LCD display reports numeric and icon-based UPS status and site power data- Select and scroll buttons enable access to UPS control, operating and LCD display settings- Numeric display reports Input Voltage, Output Voltage, Battery Charge Percentage, Output Load Percentage, Output Load Wattage and Estimated Minutes Runtime data- Icon-based display items include 5 ""bar"" battery capacity, UPS operating status, replace battery and voltage regulation status- Control-mode LCD options enable external battery configuration, alarm on/off control, self-test and LCD brightness- Front-panel LCD screen rotates for horizontal or vertical installation options- 97% line power mode efficiency operation- Line Interactive Automatic Voltage Regulation / AVR circuits correct brownouts and overvoltages from 75 to 147V- Included mounting accessories for 2U rackmount and tower installation- USB and DB9 serial ports enable optional unattended system shutdown using PowerAlert UPS management software available via free download- HID-compliant USB interface enable integration with built-in power management and auto shutdown features of Windows and Mac OS X- DB9 serial port also supports contact closure signaling for on-battery and power-restored messaging- Built-in data line surge suppression jacks offer protection for equipment with single-line dialup or PoE compatible network ethernet connection"

Double-Conversion UPS Protects Equipment against Damage, Downtime and Data LossThis 100/110/120/127V 50/60 Hz UPS system with IGBT technology maintains perfect output by converting AC input to DC, then reconverting UPS output to fully regulated sine wave AC with +/-2% voltage regulation in online and battery modes. Featuring a 2.7kW capacity, high 0.9 power factor, 570 joules of surge suppression, true on-line operation with pure sine wave output and zero transfer time to battery mode in on-line double-conversion mode, the SmartOnline® SU3000RTXLCD2UN double-conversion UPS provides the highest level of AC power protection and battery backup for critical network closet, computer room and data center equipment.Individually Controllable Load Banks Let You Access and Control Outlets RemotelyFour NEMA 5-15R outlets and four 5-15/20R outlets are split into two switchable load banks, allowing you to reboot select components or shed loads remotely. In addition to those outlets, this UPS provides one NEMA L5-30R outlet for powering critical components.Reliable, Expandable Battery Backup Keeps You Operational Through Power OutagesThe field-replaceable, hot-swappable internal battery provides 11.3 minutes of support at half load (1350W) and 4.1 minutes at full load (2700W), keeping protected equipment operational through power failures. For mission-critical applications demanding scalable extended runtime, the UPS supports external battery packs, such as Tripp Lite’s BP72V15-2U (sold separately). The intelligent battery management system with temperature-compensated charging extends battery life.Optional Economy Mode Helps You Save Money and Protect the EnvironmentA power-saving Economy mode setting option offers enhanced efficiency and reduced BTU output when utility power is already high quality, which helps you save on energy costs.Automatically Turns Back On After Power Is RestoredBattery-independent restart ensures automatic UPS power-up without user interaction after lengthy power outages, even when batteries are expired and require replacement.Intuitive Front-Panel Interface for Convenient UPS Operation and MonitoringThe front-panel LCD features detailed UPS and site power status and operating data, plus configuration of voltage, frequency, operating mode, alarm function and a variety of additional options. LEDs indicate line power availability, AC to DC conversion, battery mode operation, inverter mode, ECO mode operation, bypass mode operation and AC output status.Advanced Communications Ports Allow for Automatic Saves and ShutdownsRS-232 and HID-compliant USB ports connect to a computer running Tripp Lite’s free downloadable PowerAlert® software to enable safe unattended file saves and system shutdown in case of a prolonged power failure. An EPO port connects the UPS to a contact closure switch to enable emergency inverter shutdown. Cables are included.WEBCARDLX Network Interface Offers 24/7 Remote Access for Monitoring and ControlThe SU3000RTXLCD2UN includes the Java-free HTML5-based WEBCARDLX that enables full remote access for site power and UPS status monitoring, configuration, control and email notifications via secure web browser, SNMP, telnet or SSH. It supports 10/100 Mbps auto-sensing for optimum communication with an Ethernet network. Automated alerts help prevent accidental overloads, power loss and downtime. WEBCARDLX allows you to use the Auto Probe feature, which can prevent costly service calls by automatically rebooting non-responsive network devices.Versatile Installation OptionsHardware is included for mounting the UPS system in 2U of space in an EIA-standard 19-inch 4-post rack. Use the optional 2POSTRMKITWM (sold separately) for 2-post rack mounting or the optional 2-9USTAND (sold separately) for mounting in an upright tower position. The 10-foot power cord with NEMA L5-30P plug connects to any compatible AC outlet.

"Tripp Lite SMART750TSU. UPS topology: Line-Interactive, Output power capacity: 0.75 kVA, Output power: 600 W. AC outlet types: NEMA 5–15R, Power plug: NEMA 5-15P, AC outlets quantity: 8 AC outlet(s). Typical backup time at full load: 4 min, Typical backup time at half load: 13 min. Form factor: Tower, Product color: Black, Housing material: Acrylonitrile butadiene styrene (ABS). Width: 5.5"" (139.7 mm), Depth: 15"" (381 mm), Height: 7.5"" (190.5 mm)"

The AVRX750U Ultra-Compact Line-Interactive UPS offers complete power protection for desktop PCs, network workstations and a wide variety of professional and consumer electronic devices. Uninterruptible Power Supply / UPS circuits switch to battery backup mode within milliseconds to keep connected equipment running without interruption or data loss during power failures. Automatic Voltage Regulation / AVR power conditioning maintains smooth, continuous operation of connected equipment during brownouts and overvoltages. Surge-only outlets offer convenient protection for printers and other desktop accessories not requiring battery support. AC and dataline surge suppression prevents connected equipment damage. USB communications port supports built-in power management and auto-shutdown features of Windows and macOS or full featured monitoring and data-saving auto-shutdown options using free PowerAlert® monitoring software.

Do you need to protect medium- to large-size servers, networking equipment and telecom systems against data loss, downtime and equipment damage due to power outages, voltage fluctuations and transient surges? Tripp Lite’s SU3000XLCD SmartOnline® Tower UPS System is the solution! Featuring a 3000VA/2700W capacity and true on-line operation with pure sine wave output and zero transfer time to battery, it provides the highest level of power protection for mission-critical equipment. The SU3000XLCD’s large internal battery set supports connected equipment during blackouts, and runtime is expandable with optional external battery packs (Tripp Lite model BP72V15-2U or BP72V28RT-3U), sold separately. The SU3000XLCD has 9 AC outlets (8 5-15/20R, 1 L5-30R), including 2 load banks of 3 outlets each that are individually controllable to reboot select equipment on demand or maximize battery runtime for mission-critical equipment. USB and DB9 communication ports support messaging of detailed UPS operational parameters and line power status. Included PowerAlert power management software supports an unlimited number of network UPS systems. The SU3000XLCD also accepts an optional SNMPWEBCARD accessory that enables the UPS to operate as a managed device on the network. It comes backed by a 2-year warranty and $250,000 Ultimate Lifetime Insurance (U.S., Canada, and Puerto Rico only).- Ideal for Protection of Mission-Critical Equipment- True On-Line Operation with Pure Sine Wave Output and Zero Transfer Time- Individually Controllable Outlets- Reliable, Expandable Battery Backup- High Power Factor and Highly Efficient Operation Reduces BTU Output- AC and Tel/Ethernet Line Surge Suppression- EMI/RFI Line Noise Filtering- LCD Screen and Audible Alarm- USB/DB9 Ports, SNMP Capability and Included PowerAlert Software- Emergency Power Off (EPO) Capability- Peace of Mind

Tripp Lite SmartPro Line Interactive UPS with enhanced LCD interface offers network-grade power protection for critical server, network and telecommunications equipment. Line Interactive Uninterruptible Power Supply (UPS) with built-in Auto-Voltage Regulation (AVR) actively corrects brownouts and overvoltages back to usable levels while maintaining a full battery charge in case of power failure. Interactive LCD interface reports UPS operating mode, detailed UPS and site-power data, plus enables a variety of UPS setup and configuration options. Super-fast switchover from line to battery power occurs within milliseconds to maintain operation of connected equipment without interruption or reboot. 95% line-mode efficiency offers reduced heat emissions and operating costs. Network management interfaces support communications via USB, RS-232 and optional SNMPWEBCARD network interface. HID-compliant USB interface enables integration with built-in power management and auto shutdown features of Windows and Mac OS X. Network communications ports enable detailed monitoring of equipment load levels, self-test data and utility power conditions. Includes PowerAlert monitoring software and complete cabling. Switched output load banks enable scheduled and real-time remote reboot and load shedding of select outlets. Emergency Power Off (EPO) interface. LCD display panel easily rotates for viewing in rackmount or tower configurations. Audible alarm with push-button momentary alarm-cancel and silent-mode configuration options. Programmable self-test. Field-replaceable, hot-swappable battery modules.- Tripp Lite SMART750RMXL2U line interactive 2U rack/tower UPS with 750VA / .75kVA / 600W capacity and extended runtime options- Line interactive UPS with Automatic Voltage Regulation (AVR) corrects brownouts and overvoltages from 83 to 147V- NEMA 5-15P input plug; 6 NEMA 5-15R output receptacles, Two independently switched output load banks- Maintains uninterrupted operation of connected networking equipment during blackouts, surges, brownouts and overvoltages- High 95% efficiency rating in line-power mode offers reduced power consumption and BTU emisssions- Internal batteries offer 20.7minutes at 50% load (300W) and 8.5 minutes at 100% load (600W)- Extended runtime is available with optional BP24V15RT2U (limit 1), BP24V28-2U (limit 1), BP24V70-3U (multi-pack compatible) and BP24V36-2US (multi-pack compatible); Output is reduced to 450 watts maximum with external battery packs- External battery configurations require the use of Tripp Lite's External Battery Configuration Software (see manual)- Hot-swappable, user-replaceable internal batteries and external battery packs can be replaced with no disruption to connected equipment- Front panel LCD monitoring screen with MODE and ENTER buttons reports operating mode with 5-bar battery charge graphic, plus 7 selectable screens of detailed UPS and site power information- LCD interface also supports a number of advanced user setup and operating preferences- Ships with 4 post rackmount installation hardware; Optional 2POSTRMKITWM enables 2 post rackmount/wallmount installation; Optional 2-9USTAND enables tower placement- Built-in USB, RS-232 and optional SNMPWEBCARD accessory monitoring options- HID-compliant USB interface enables integration with built-in power management and auto shutdown features of Windows and Mac OS X- Included PowerAlert UPS monitoring software; Built-in Emergency Power Off (EPO) interface with cable

Protects connected mission-critical equipment against damage, downtime and data loss due to blackouts, brownouts, power surges and line noise. Pre-installed network management card permits remote UPS management.- Zero transfer time suitable for advanced network applications- 2% output voltage regulation in online and battery modes- Expandable runtime with optional external battery packs- Meets strict ENERGY STAR® efficiency guidelines- 12 min. runtime at half load; 4 min. at full loadThe SU2200RTXLCDN SmartOnline® 120V 2.2kVA 1.8kW On-Line Double-Conversion UPS provides battery backup and AC power protection against blackouts, brownouts, power surges and line noise that can damage electronics or destroy data. It converts AC input to DC power, and then converts DC to fully regulated sine wave AC output with +/-2% voltage regulation in online and battery modes.The ENERGY STAR-certified SU2200RTXLCDN saves you money by meeting strict EPA guidelines. Featuring six NEMA 5-15/20R outlets in two switchable numbered load backs, as well as one L5-20R outlet and a 5-20P input, the SU2200RTXLCDN has an internal battery that provides 12 minutes of support at half load and four minutes at full load. Adding external battery packs, such as BP48V24-2U (sold separately), provides extended runtime.The pre-installed network management card permits remote management, including reboots, configuration, updates and activity logs. An interactive LCD interface displays operating conditions and diagnostic data. You can set operating modes to reflect your protection priorities, including an optional economy mode that saves heat output and energy costs.EMI/RFI noise filtering improves your equipment’s performance and prevents damage. A 570-joule surge suppression rating protects your equipment from harmful power surges. With Tripp Lite’s free downloadable PowerAlert® software, the SU2200RTXLCDN enables safe unattended system shutdown and file saves in case of a prolonged power failure.Protects Mission-Critical Rack-Mounted Equipment- Provides fully regulated sine wave AC output for servers, network storage devices and telecom hardware- +/-2% voltage regulation in online and battery modes- Selectable 100/110/120/127V output voltage- 6 NEMA 5-15/20R and 1 L5-20R outlets- 10 ft. power cord with NEMA 5-20P input- 570-joule surge suppression ratingReliable Battery Backup with Expandable Runtime- Supports half load for 12 min. and full load for 4 min.- Zero transfer time suitable for advanced network applications- Expandable runtime with optional external battery packs, such as Tripp Lite’s BP48V24-2U- Restarts automatically after lengthy power outagesENERGY STAR Certification- Saves money and energy and protects environment by meeting strict EPA efficiency guidelinesIncluded Network Management Card- Pre-installed network management card permits remote management of UPSSwitchable Numbered Load Banks- Outlets are divided into 2 numbered load banks, each of which may be individually powered on and off remotely to reset or reboot connected equipmentInteractive LCD Screen- Reports detailed status information, including load, voltage and battery levels- Offers advanced configuration and setup options, including output voltage and operating modeEMI/RFI Line Noise FilteringRemoves electromagnetic and radio frequency interference that can disrupt or damage equipment’s performanceAudible Alarm- Indicates startup/shutdown, power failure, low battery, overload and fault conditionsCommunications Ports- USB and DB9 ports enable data-saving unattended shutdown when used with Tripp Lite's PowerAlert software, available via free download at www.tripplite.com/poweralert- EPO port supports emergency shutdown in large facilitiesVersatile Installation Options- Hardware included for 4-post mounting in 2U of EIA-standard 19 in. rack- Mounts on wall or 2-post rack with optional 2POSTRMKITWM- Mounts in upright tower position with optional 2-9USTAND

Protects connected mission-critical equipment against damage, downtime and data loss due to blackouts, brownouts, power surges and line noise. Pre-installed Network Management Card permits remote UPS management, including reboots.- Zero transfer time suitable for advanced network applications- 2% output voltage regulation in online and battery modes- Expandable runtime with optional external battery packs- Preinstalled Network Management Card- 14 min. runtime at half load; 4.2 min. at full loadThe SU1500RTXLCDN SmartOnline® 120V 1.5kVA 1.35kW On-Line Double-Conversion UPS provides battery backup and AC power protection against blackouts, brownouts, power surges and line noise that can damage electronics or destroy data. It converts AC input to DC power, and then converts DC to fully regulated sine wave AC output with +/-2% voltage regulation in online and battery modes.Featuring six NEMA 5-15R outlets in two switchable numbered load banks, as well as a NEMA 5-15P input, the SU1500RTXLCDN has an internal battery that provides 14 minutes of support at half load and 4.2 minutes at full load. Adding external battery packs, such as BP48V24-2U (sold separately), provides extended runtime.The pre-installed Network Management Card accessory card permits remote management, including reboots, configuration, updates and activity logs. An interactive front-panel LCD interface displays operating conditions and diagnostic data, such as load, voltage and battery levels. You can set operating modes to reflect your protection priorities, including an optional economy mode that saves heat output and energy costs.EMI/RFI noise filtering improves your equipment’s performance and prevents damage. A 570-joule surge suppression rating protects your equipment from harmful power surges. With Tripp Lite’s free downloadable PowerAlert® software, the SU1500RTXLCDN enables safe unattended system shutdown and file saves in case of a prolonged power failure. An audible alarm indicates startup/shutdown, power failure, low battery, overload and fault conditions.Protects Mission-Critical Rack-Mounted Equipment- Provides fully regulated sine wave AC output for servers, network storage devices and telecom hardware- +/-2% voltage regulation in online and battery modes- Selectable 100/110/120/127V output voltage- 6 NEMA 5-15R outlets- 10 ft. power cord with NEMA 5-15P input- 570-joule surge suppression ratingReliable Battery Backup with Expandable Runtime- Supports half load for 14 min. and full load for 4.2 min.- Zero transfer time suitable for advanced network applications- Expandable runtime with optional external battery packs, such as Tripp Lite’s BP48V24-2U- Restarts automatically after lengthy power outagesIncluded Network Management Card- Pre-installed Network Management Card permits remote management of UPSSwitchable Numbered Load Banks- Outlets are divided into 2 numbered load banks, each of which may be individually powered on and off remotely to reset or reboot connected equipmentInteractive LCD Screen- Reports detailed status information, including load, voltage and battery levels- Offers advanced configuration and setup options, including output voltage and operating modeEMI/RFI Line Noise Filtering- Removes electromagnetic and radio frequency interference that can disrupt or damage equipment’s performanceAudible Alarm- Indicates startup/shutdown, power failure, low battery, overload and fault conditionsCommunications Ports- USB & Serial ports enable data-saving unattended shutdown when used with Tripp Lite's PowerAlert software, available via FREE download from www.tripplite.com/poweralert- EPO port supports emergency shutdown in large facilitiesVersatile Installation Options- Hardware included for 4-post mounting in 2U of EIA-standard 19 in. rack- Mounts on wall or 2-post rack with optional 2POSTRMKITWM- Mounts in upright tower position with optional 2-9USTAND

Tripp Lite SMART750RM1U 750VA / .75kVA / 600 watt line interactive, sine wave UPS system offers complete power protection for critical network applications in a highly efficient 1U total rack/tower configuration. Simultaneous-use network management interfaces include USB, RS-232 and optional SNMP/Web accessory card. Line interactive voltage regulation, network-grade surge suppression and long-lasting sine wave AC output during blackouts make this UPS ideal for advanced networking applications in datacenters, computer rooms and network closets.- Tripp Lite SMART750RM1U .75kVA / 750VA / 600 watt line interactive UPS- 1U rack/tower compatible form factor- Included mounting brackets support 2 and 4 post rackmount installation; Optional 4POSTRAILKIT1U is available for additional support- NEMA 5-15P input; 6 5-15R output receptacles- Installed depth of only 16.75 in. / 42.5cm- Sine wave output in both AC and battery backup modes- Line Interactive UPS provides Automatic Voltage Regulation / AVR to maintain 120V nominal output during brownouts to 83V and overvoltages to 147V without using battery power- Full load efficiency rating of 99% saves energy and ensures cool operating temperatures- Integrated 2 bank switched PDU enables remote outlet management for load shedding or remote reboot of individual devices- PowerAlert monitoring software offers detailed site power and UPS updates with support for safe auto-shutdown of connected systems as UPS batteries become depleted- Includes Free PowerAlert monitoring software packages; PowerAlert LOCAL for desktops and small business networks, PowerAlert NSA (Network Shutdown Agent) for larger networks and PowerAlert NMS (Network Management System) for monitoring up to 250 SNMP-enabled UPS, PDU and other networking devices- Supports detailed monitoring of equipment load levels, self-test data and utility power conditions via built-in RS-232 and USB interfaces- HID-compliant USB interface enables integration with built-in power management and auto shutdown features of Windows and Mac OS X- Optional SNMPWEBCARD offers communications and control via secure remote web and network interfaces- 3 stage metered LEDs offer current monitoring and battery charge level- Mains power and voltage regulation LEDs offer at-a-glance power status information- Front panel switches support self-test and alarm cancel functions- Field replaceable, hot-swappable internal UPS batteries

Tripp Lite's SMART 2200VS intelligent, line interactive UPS protects server, networking and telecommunications equipment from blackouts, voltage fluctuations and transient surges. Small footprint, tower UPS system occupies only 106 square inches of floor space with a height of only 14.25 inches. Large capacity 2200 VA/ 1600 watt rated UPS system offers 7 minutes runtime at full load and 19 minutes at half load during power failures. Line interactive voltage regulation corrects brownouts as low as 79V and overvoltages as high as 147V to fully regulated 120V nominal output for smooth continuous operation of connected equipment. Includes a total of 9 outlets, 3 pairs of which can be individually powered off and back on via software interface to selectively reboot remote equipment or shed less critical loads to extend battery runtime for more critical loads. Includes slot for internal SNMPWEBCARD, plus 2 DB9 and 2 USB enhanced monitoring ports for unattended shutdown, remote control and monitoring of UPS system and power data. Ships in attractive gray color scheme. Compatible with Tripp Lite's PowerAlert and Watchdog service software.- 2200VA/1600 watt output capacity accommodates a variety of server, networking and telecom devices- High power density 2.2kVA UPS system occupies only 106 square inches of floor space with a height of only 14.25 inches- Compatible with North American 120V/60 Hz power as found in the USA, Canada and Mexico- Offers 7 minutes runtime with a full load of 2200VA and 19 minutes with a half load of 1100VA- Line interactive voltage regulation corrects severe brownouts and overvoltages from 79 to 147v back to normal 120v levels without using battery power- 9 total outlets (7 NEMA5-15R; 2 NEMA5-15/20R)- Includes NEMA 5-20 straight blade 20 amp input plug connection- Notification of system status via 5 LEDs and multi-function audible alarms- Included PowerAlert Software provides e-mail notification of power problems and the simultaneous automatic unattended shutdown of multiple servers- 4 built-in communications ports (2-DB9, 2-USB) for remote monitoring and unattended shutdown- Slot for SNMP/web card (part#: SNMPWEBCARD) and environmental sensor (part#: ENVIROSENSE) for remote communications in large IP environments- Supports Tripp Lite's WatchDog software application to restore unresponsive programs by automatically restarting them and rebooting completely locked computers by automatically switching UPS power off and back on again- Communication ports support on battery, low battery, power restored, AC line voltage, DC battery voltage, load percentage, battery charge current, battery capacity, internal UPS temperature and line frequency status messaging. Interface supports timed inverter shutoff after unattended shutdown, activate self-test and 10 second reboot of connected equipment- 3 pairs of customized load management receptacles can be individually powered off and back on again via software interface to reboot remote equipment or shed less critical loads to extend battery runtime for the most critical equipment- Built-in Emergency Power Off (EPO) interface supports emergency shutoff in large facilities- Hot-swappable/user replaceable batteries allow on-site battery replacement without powering off connected equipment- UPS battery set ships fully assembled and ready for use, no time consuming, connection of individual internal batteries by user is necessary- UL (USA), cUL (Canada), NOM (Mexico), Class A (Emissions)