Access and Control 2 Computers with One KVM SwitchSwitch between computers using keyboard hotkeys or front-panel buttonsAuto Scan feature cycles between computers at regular intervals for at-a-glance observation of activityMonitor's EDID information sent to connected computer when selectedSupports DisplayPort 1.1Independent Audio Switching3.5 mm mini-stereo speaker and microphone jacks allow sharing of audio equipment between computersListen to audio files on one computer while accessing the other computerSupports 2-channel stereo audioIndependent USB 3.0 Peripheral Sharing2-port USB 3.0 SuperSpeed hub allows connection of peripherals, such as webcams, flash drives, printers and scannersPrint documents from one computer while accessing the other computerSupports USB 3.0 data transfer rates up to 5 GbpsBackward compatible with USB 2.0 and USB 1.1 devicesCompatible with All Major Operating SystemsEasy to set up with no software or drivers to installSupports digital video resolutions up to 2560 x 1600, including 1080pWorks with Windows, Mac, Linux and SunAll necessary cables included
Tripp Lite’s B072-016-IP2 KVM Switch is the optimal solution for controlling up to 16 computers/servers locally, from across the room, down the street or around the globe on a network or the Internet.This KVM switch can be accessed and controlled remotely, so there’s no need to travel to the server room or network closet. A Java-based application allows access via web browser from any secure IP connection; a non-browser client that can bypass browser-related Java Security prompts is available. The B072-016-IP2 uses inexpensive, user-supplied Cat5e/6/6a cabling with Server Interface Units (sold separately) so you can connect computers/servers located up to 100 ft. away from the switch. This switch features dual Ethernet ports and dual power supplies; if one fails, the other takes over, keeping access uninterrupted. Switch easily between the 16 ports using an on-screen display (OSD), hotkey commands or a remote toolbar. Multi-level password protection prohibits unauthorized users from accessing connected computers, and a local user and up to two remote users can each log on and access different ports simultaneously. Two serial ports allow control of serial-manageable devices such as IP PDUs, firewalls and routers; individual ports can be assigned to an IP PDU port to power on/off the server connected to that port. This KVM switch is compatible with Windows and Linux operating systems, and provides remote access using a Windows computer. It supports VGA video resolutions up to 1920 x 1080 @ 60 Hz. Heavy-duty steel housing stands up to frequent use. Virtual Media allows an .iso file to be mounted to a target server and accessed as if it were stored directly on it. Virtual Media data transfer rates up to 12Mbps are supported when using a B078-101-USB2 Server Interface Unit. Other features include RADIUS and LDAP/S authentication, system-sent SNMP messaging and an event log that tracks logins, reboots and network setting changes. Free NetCommander-AXS Management Software is available to access and control all of your Tripp Lite NetCommander IP KVM switches (B070 and B072 series). From a single interface, you can access server ports on any of your KVM switches, power cycle or power on/off outlets of IP PDUs and manage KVM settings. This software can be downloaded free of charge from the model support page for the B072-016-IP2. Compliant with the Federal Trade Agreements Act (TAA) for GSA Schedule purchases.Saves Space and MoneyMounts in a standard 19 in. rackInexpensive Cat5e/6/6a cabling lets you locate servers up to 100 ft. from the switchUse a Server Interface Unit, B078-101-USB-1 or B078-101-USB2 (for USB) or B078-101-PS2 (for PS/2) with each server that will be connected with Cat5 cableTo convert DisplayPort or HDMI computers to VGA, use Tripp Lite adapters P134-06N-VGA-V2 or P131-06N. Maximum video resolutions using adapters may vary.IP Remote Access for Fewer Trips to the Server RoomRemote access means there’s no need to travel to the server room or network closetJava-based application allows Windows computers to control a target server via web browser from any location over a secured IP connectionA non-browser client is available that allows Windows computers to remotely access the KVM without the need for a browser and without the need to install Java 1 local + 2 remote users can access different ports concurrently; up to 5 users can share a single remote sessionSupports both IPv4 and IPv6Simplifies IT TasksOn-screen display, hot keys and remote toolbar for easy useFree NetCommander-AXS Management Software gives you remote access and control over all your Tripp Lite NetCommander IP KVM switches (B070 and B072 series)Video resolutions up to 1920 x 1080 @ 60 Hz are supported2 serial ports allow control of serial-manageable devices such as IP PDUs, firewalls and routers; assign individual ports to an IP PDU port to power on/off the server connected to that portBIOS-level control of any brand and model server, regardless of the server’s condition and network connectivityVirtual Media allows an .iso file to be mounted to a target server and accessed as if it were directly stored on itVirtual Media data transfer rates up to 12Mbps are supported when using a B078-101-USB2 Server Interface Unit; a B078-101-USB-1 Server Interface Unit can be used for Virtual Media support, but only at speeds up to 1MbpsFast Virtual Media KVM System patented under Pat. No. US 9,417,720System-sent messages to SNMP server notify you of network failuresSupports RADIUS and LDAP/S authenticationLog tracks events such as logins, reboots and network setting changes on your installationAdvanced Security FeaturesMulti-level password protection: create administrator accounts with full access and user accounts with limited accessSupports TLS 1.2 security protocolYou can install SSL certificates to ensure secure transactions between web servers and browsersBuilt to LastFlash-upgradable firmware over the networkHeavy-duty steel housing stands up to frequent useTAA CompliantCompliant with the Federal Trade Agreements Act (TAA) for GSA Schedule purchases
The B022-U08 NetDirector 8-Port 1U Rack-Mount KVM Switch allows IT professionals to control up to eight computers from one keyboard, mouse and monitor. The unit mounts into 1U of rack space and serves as either a stand-alone KVM switch or an expansion unit to other NetDirector KVM switches, such as Tripp Lite’s B020-U16-19-K. The B022-U08 is compatible with all major operating systems. Daisy-chain up to 31 additional units to control a maximum of 264 computers. When connected as part of a daisy-chain, each individual B022-U08’s position is sensed automatically without needing to manipulate DIP switch settings.The advanced on-screen display (OSD) is available in English, Spanish, French, German or Japanese and supports high-definition video up to 2048 x 1536. Compatible with both USB and PS/2 connections using the included cable kit, this KVM switch allows you to switch between connected computers using front-panel pushbuttons, the OSD or keyboard hotkey commands. And by connecting an optional Tripp Lite B051-000 Server Remote Control, you’ll be able to control all connected computers from anywhere via LAN, WAN or the Internet.Two levels of security allow you to delegate proper access to approved personnel up to four Users and one Administrator. A convenient auto-scan feature lets you monitor all connected computers without having to manually switch between them. A front USB 1.1 port lets you share flash drive or external hard drive data with the connected computers.Controls up to 8 computers or servers using one keyboard, mouse and monitor or up to 264 as part of a daisy-chain. Functions as a stand-alone KVM switch or an expansion unit to other Tripp Lite NetDirector KVM switches.- Supports video resolutions up to 2048 x 1536- Daisy-chain up to 32 switches to control up to 264 computers- Front USB port enables external data sharing to all computers- Works with all major operating systems
This 16-Port NetCommander® 1U rack-mount Cat5 KVM Switch is the next generation of our cost-effective, feature-rich KVM switches. Its sleek 1U design and compact size features RJ45 connection ports that utilize inexpensive Cat5 cables, reducing the amount of cable clutter normally found with traditional KVM cabling. Easily switch between CPUs with Push Buttons, Hot-Key commands or built-in On Screen Display (OSD) menu function. Cascadability allows connection to up to 256 computers. Compatible with PS/2 and USB computers, VGA, SVGA or XGA monitors, as well as all major operating systems. Constructed of heavy-duty steel housing. Compliant with the Federal Trade Agreements Act (TAA) for GSA Schedule purchases.
This USB Console Interface Module allows a user to access a B060-Series NetDirector® Matrix KVM Switch from as far away as 500 feet. The console (keyboard, monitor and mouse) is connected to the HD15 port and USB port on the unit. The B062-002-USB is then connected to a B060-Series NetDirector Matrix KVM Switch via ordinary Cat5e cable.The unit also includes a 2-in-1 USB KVM Cable kit for connecting to a local computer/server. Simply use the switch on the front of the box to toggle between PC use and KVM switch use...no need to set up a separate console station.
The B022-U16-IP NetDirector® 16-Port 1U Rack-Mount IP KVM Switch is the smart solution for controlling up to 16 computers or servers from one monitor, keyboard and mouse, all from the next room, next door, or the next continent.The B022-U16-IP takes up just 1U of rack space and works with all major operating systems. Built-in IP access allows you to control computers via LAN, WAN or the Internet. Just log on to a Web browser using the Windows- or Java-based browser client, and navigate the user-friendly interface in English, Spanish, French, German or Japanese. You can also access the KVM Switch without a browser if you prefer.The advanced on-screen display (OSD) supports high-definition video up to 2048 x 1536 at the local console and up to 1600 x 1200 @ 60 Hz with 24-bit color depth at the remote console. Panel Array Mode allows you to remotely monitor multiple ports at the same time. Compatible with both USB and PS/2 connections using the included cable kits, the KVM Switch allows you to select a connected computer using on-console pushbuttons or keyboard hotkey commands. It also supports both IPv4 and IPv6, as well as Link Local IPv6 Address and Stateless Auto Configuration protocol.Advanced encryption technologies, such as 128-bit SSL, 128-bit RC4, 1024-bit RSA, 56-bit DES, 256-bit AES and 168-bit 3DES, keep your important data secure. The KVM Switch supports RADIUS and LDAP/S remote authentication. Three levels of security allow you to delegate proper access to approved personnel, and you can create up to 64 separate accounts.Complete Control from Anywhere- Built-in IP access lets you control up to 16 computers directly from the next room, next door, or the next continent- Remotely access computers via LAN, WAN or the Internet via Windows or Java- Windows- and Java-based non-browser applications provide access without a browser- Advanced on-screen display supports high-definition video up to 2048 x 1536 at the local console and up to 1600 x 1200 (@ 60 Hz) at the remote console- Panel Array Mode – remotely monitor multiple ports at the same time.Built-In Security to Keep Your Data Safe- Create up to 64 separate accounts- 3 levels of security (Admin, User and Select) allow you to delegate proper access- Features advanced encryption technologies, such as 128-bit SSL, 128-bit RC4, 1024-bit RSA, 56-bit DES, 256-bit AES and 168-bit 3DES- Supports RADIUS and LDAP/S remote authentication- LEDs built into the port-selection pushbuttons indicate when a computer is connected, powered on and selected- Included firmware upgrade cable keeps the software up to dateVersatile to Meet Your Specific Needs- Compatible with all major operating systems- User-friendly web management interface can be displayed in English, Spanish, French, German and Japanese- Included cable kits let you use either USB or PS/2 keyboards and mice- View remote sessions in black and white, reducing the amount of data traveling over the network and improving keyboard/mouse response time over IP- Supports both IPv4 and IPv6, as well as Link Local IPv6 Address and IPv6 Stateless Auto Configuration protocolKeep Your Colleagues in the Loop- Windows-based log server records events and saves them to a searchable database- Users who are logged in simultaneously can communicate via message board and manage port accessRack-Mounted Convenience- Mounts into just 1U to save valuable cabinet or rack space- Rugged steel housing and premium connectors built to last
"The B004-DUA4-K-R is a 4-Port DVI/USB KVM Switch with audio and USB 2.0 peripheral sharing. It allows you to access, control, boot and reboot four computers from a single USB keyboard, USB mouse, and monitor. Switching between connected computers is quick and simple using keyboard hotkeys or pushbuttons. An independent audio/mic and USB peripheral switching function allows for an uninterrupted experience. A computer can be printing on a printer connected to one of the USB 2.0 peripheral ports, while you listen to audio from and access another computer; all at the same time. The B004-DUA4-K-R uses DVI-I technology, allowing for the transmission of a digital (up to 1920 x 1200) or analog (up to 2048 x 1536) signal. A DVI to VGA adapter, such as Tripp Lite's P126-000, is required for conversion to an analog monitor. Whichever you use, full time DDC support provides the necessary EDID information required for optimal video performance on Windows 7 and other operating systems. Compatible with all major operating systems.- Control 4 computers with a single DVI monitor, USB keyboard and USB mouse- Switch ports via keyboard hotkeys or pushbuttons- Allows for the sharing of audio components between systems; listen to music from one computer while accessing another- Features two USB 2.0 ports for the sharing of USB peripherals (e.g. flash drives, printers, etc.) between the connected computers- (x4) 6ft USB cables and (x4) 1.83 m (6-ft.) DVI + Audio KVM cable kits included- Full time DDC support provides the necessary EDID information for optimal video performance on Windows 7 and other operating systems- Compatible with all major operating systems""- Fast, easy switching via keyboard hotkeys or pushbuttons- Plug-and-play setup - no software required- Hot-swap capability allows easy addition or removal of computers without powering down the switch or other computers- Speaker and microphone connections allow for the sharing of audio components between systems- Supports 2-Channel Stereo Audio- Independent audio/mic and USB peripheral switching function allows for an uninterrupted experience. A computer can be printing on a printer connected to one of the USB 2.0 peripheral ports, while you listen to audio from and access another computer; all at the same time.- Uses DVI-I technology, allowing for the transmission of a digital (up to 1920 x 1200) or analog (up to 2048 x 1536) signal. A DVI to VGA adapter, such as Tripp Lite's P126-000, is required for conversion to an analog monitor.- To connect to a HDMI monitor, a DVI to HDMI adapter such as Tripp Lite's P132-000 is required (Audio is not supported when converting from DVI to HDMI).- Full time DDC support provides the necessary EDID information for optimal video performance on Windows 7 and other operating systems- Supports Microsoft IntelliMouse and the scrolling wheel on most mice- (x4) 1.83 m (6-ft.) USB cables and (x4) 1.83 m (6-ft.) DVI + Audio KVM cable kits included- Compatible with all major operating systems"
Access and Control Up to 4 Computers with One KVM SwitchSwitch among computers using keyboard hotkeys or front-panel buttonsMonitor's EDID information sent to connected computer when selectedAuto Scan feature cycles among computers at regular intervals for at-a-glance observation of activitySupports DisplayPort 1.1Independent Audio Switching3.5 mm mini-stereo speaker and microphone jacks allow sharing of audio equipment among computersListen to audio files on one computer while accessing another computerSupports 2-channel stereo audioIndependent USB 3.0 Peripheral Sharing2-port USB 3.0 SuperSpeed hub allows connection of peripherals, such as webcams, flash drives, printers and scannersPrint documents from one computer while accessing another computerSupports USB 3.0 data transfer rates up to 5 GbpsBackward compatible with USB 2.0 and USB 1.1 devicesCompatible with All Major Operating SystemsEasy to set up with no software or drivers to installSupports digital video resolutions up to 2560 x 1600, including 1080pWorks with Windows, Mac, Linux and SunAll necessary cables included
Connects 4 HDMI-Enabled Devices to a Single HDMI Monitor, Keyboard and MouseThis compact four-port KVM switch lets you access, control, boot and reboot four computers or other devices with HDMI ports at the same time. In addition to desktop and notebook computers, the switch also connects up to four media centers, gaming systems, Blu-ray and DVD players, cable and satellite boxes and DVRs, and other HDMI-enabled devices. All four computers share one HDMI monitor, USB keyboard and USB mouse, which saves space on your desk or workspace.Switching Between Computers Is Fast and EasyUse the front-panel push buttons or hotkey commands for quick and easy toggling between computers. Or you can use Auto Scan mode to scan all four connected computers in five-second intervals automatically. Orange LEDs indicate which computer is currently selected.Cables Are Included for Fast and Simple SetupConnect your HDMI monitor, keyboard, mouse, and speakers to the switch’s console ports. Then, use the included HDMI, USB-B and 3.5 mm audio cables to connect your computers to the KVM switch. The plug-and-play KVM switch requires no software or drivers, so you can connect and use it immediately. The B004-HUA4-K works with all major operating systems, including Windows, Mac and Linux.USB Hub Lets You Share Peripherals between ComputersThe built-in two-port USB 2.0 hub allows you to share USB peripherals, such as printers, hard drives, scanners, webcams and flash drives, between the four connected computers. Because the USB ports operate independently, you can print documents from one computer while working on a different computer. The hub is backward compatible with USB 1.1 devices. Green LEDs indicate which computer is using the connected USB device.Transmits Crystal-Clear 1080p Video and Digital AudioThe B004-HUA4-K KVM switch supports high-definition video resolutions up to 1920 x 1200 (including 1080p) at 60 Hz, 2.1-channel surround sound audio, and USB 2.0 data transfer rates up to 480 Mbps. With independent audio switching, you can listen to music or other audio from one computer while working on a different computer. The front-panel audio jacks have priority over the rear-panel jacks.
This 16-port NetDirector® Cat5 IP KVM Switch is the optimal solution for remotely controlling multiple computers (combination of PS/2, USB and Serial) by up to five (one Local and four Remote) independent, simultaneous users. Both DVI and VGA console ports are included for connection of either a DVI or VGA monitor. High video resolution: up to 1600 x 1200 at 60 Hz with 32-bit color depth for the local console and up to 1600 x 1200 at 60 Hz with 24-bit color depth for remote sessions up to 164 feet (50 meters). A full-screen graphical OSD with multi-level authentication (Super Administrator, Administrator and User) allows you to quickly and efficiently manage your installation, and can be displayed in English, German, Russian, Japanese, traditional Chinese and simplified Chinese. Critical events on the installation can be tracked via email notification, SNMP traps, the Windows-based log server or Syslog server. Accessing the connected computers is a breeze. View multiple computers at the same time using panel array mode, automatically sync USB mice and access the on-screen keyboard feature in numerous language formats. Virtual Media allows computers connected using a B055-001-USB-V2 Server Interface Unit to access DVD/CD drives, flash drives and other storage media as if they were directly connected to the computer. In addition, three USB ports are located on the front panel of the unit for use with Virtual Media or an external keyboard and mouse. Also located on the front of the KVM is a USB Mini-B port that allows for direct connection of a laptop for easy console operation of the switch. Other features include FIPS 140-2 level 1 security standards support, dual power supplies that allow the unit to continue running in the event one power supply stops receiving power, temperature sensors that control the speed of the unit's cooling fans, remote authentication support via RADIUS, LDAP, LDAPS and Active Directory, dial-in modem access and non-browser access using Windows and Java applications. Constructed of heavy-duty steel housing.
MFR: Netgear, Inc
Qty: 1
Part #: GS105NA