C14-to-C13 Power Cable for Network Devices That Require a Heavy-Gauge ConnectionThis IEC-320-C14 to IEC-320-C13 cable features 14 AWG wire suitable for high power connections, making it a reliable solution for large server applications that require a higher-rated, heavier-gauge cable. This C14 male to C13 female cord can be used to connect a computer, server, monitor or drive to a UPS system or PDU or replace or upgrade the standard power cord provided by the device's manufacturer. The 2-ft. (0.61 m) length helps reduce cable clutter and minimize the risk of tripping.Color-Coded to Avoid Misidentification That Can Cause Costly DowntimeThis computer power extension cord features a blue SJT jacket and fully molded blue ends. The color-coding allows easy, fast identification in a crowded rack or workstation and helps prevent the cable from becoming inadvertently disconnected.
Fast, Clear Data Transmission Through Your LANData transfer speeds up to 10 GbpsIdeal for network equipment that requires singlemode fiber optic patch cablesAttenuation loss meets or exceeds latest industry standardsLC Connectors with Push/Pull TabsPush/pull tab connectors easy to install and remove with one handSturdy dual LC connectors tested to meet stringent insertion loss standardsSuperior Construction for Error-Free Signal Transfer9/125 duplex (zipcord) fiber made from glassBeveled edge on glass ends for easy plug insertionYellow-colored for identification as singlemodeFDDI- and OFNR-rated
Length: 100-ft. (30.5 m)/Color: Blue/Connectors: RJ45 maleMeets category 6 cabling standardsPremium cabling for category 6, category 5e and category 5 applicationsHigh-quality copper wire and a staggered-pin plug design to keep near-end crosstalk levels to a minimumFeature molded connectors with integral strain reliefSnagless design protects the locking tabs on the RJ45 connectors from being damaged or snapped off during installation
The P006-015-HG13CL Hospital-Grade Computer Power Cord features a C13 plug on one end and a NEMA 5-15P-HG plug on the other, allowing you to connect your computer or peripheral to a hospital-grade AC power outlet. Both plugs are clear, so you can inspect their internal construction at a glance. The unit is tested to ANSI/UL 62 and 817, as well as CAN/CSA C22.2 no. 21 and 49 standards, ensuring it’s a safe, reliable power solution for hospital environments. The C13 plug connects to computers, printers, scanners, monitors and other electronic devices with a three-pin C14 port. This 4.57 m (15-ft.) 125V/13A cord features 16 AWG wire, a flexible SJT jacket and fully molded ends for optimum performance.- Conforms to hospital-grade power cord standards- Tested to ANSI/UL 62 and 817 and CAN/CSA C22.2 no. 21 and 49- 125V/13A rating- Fully molded ends- Clear C13 and NEMA 5-15P-HG hospital-grade plugs- Connects computers and peripherals to a grounded hospital-grade AC outlet - Ideal for replacing an old or lost cord- Features C13 female connector and NEMA 5-15P-HG male connector - Clear plugs for visual inspection of internal construction- 16 AWG wire - Flexible SJT jacket
Meets category 6 cabling standardsPremium cabling for category 6, category 5e and category 5 applicationsLength: 5 ft./Color: black/Connectors: RJ45 maleDrastically reduce impedance and structural return loss compared to standard 100MHz wireHigh-quality copper wire and a staggered-pin plug design to keep near-end crosstalk levels to a minimumFeature molded connectors with integral strain reliefSnagless design protects the locking tabs on the RJ45 connectors from being damaged or snapped off during installationPVC 4-pair stranded UTPDeliver stable performance up to 550MHz/1 Gbps communicationMeets most current industry standards including IEEE 802.3ab, IEEE 802.5, ANSI/EIA/TIA 568, ISO/IEC 11801 and ETL (category 6 draft 11)Available in other colors and lengths
More Convenient, Less Expensive Way to Watch 4K VideoThis DisplayPort to HDMI active converter expands the potential of your DP computer or laptop by allowing it to transmit UHD video and audio to a 4K monitor, projector or HDTV. This allows you to continue using your existing HDMI display with a DisplayPort 1.2 source device.Latching DisplayPort Plug Provides a Secure ConnectionThe molded DP connector features special latches, which help prevent the DP to HDMI adapter from becoming loose or accidentally dislodged from the source device and causing signal loss.Outstanding 4K x 2K Picture Quality at 60 HzThis adapter cable supports HDMI bandwidth up to 18 Gbps, allowing you to enjoy 4K video on a large HDMI monitor or digital sign. It supports video resolutions up to 4K at 60 Hz (3840 x 2160), as specified in HDMI 2.0, and DisplayPort 1.2 audio (if your DP card supports audio pass through). It is backward compatible with all previous HDMI versions.Ready to Use Right Out of the PackageThe plug-and-play DisplayPort to HDMI active converter requires no software, drivers or external power. It’s compatible with both Single- and Dual-Mode (DP++) DP output, and recommended for use with graphics cards that do not output DP++ signals. The compact unit fits easily into a briefcase or laptop bag for connecting on the go.Premium Construction for Premium PerformanceFoil and braid shielding delivers reliable, error-free signal quality and protection from EMI/RFI line noise that can distort or destroy data. Molded connectors with corrosion-resistant gold-plated contacts provide maximum conductivity and minimize data loss. Integral strain relief reduces stress and helps the cable and connectors move freely without cracking.
The P006-003-HG10 Hospital-Grade Computer Power Cord features a C13 plug on one end and a NEMA 5-15P-HG plug on the other, allowing you to connect your computer or peripheral to a hospital-grade AC power outlet. It’s tested to ANSI/UL 62 and 817, as well as CAN/CSA C22.2 no. 21 and 49 standards, ensuring it’s a safe, reliable power solution for hospital environments. The C13 plug connects to computers, printers, scanners, monitors and other electronic devices with a three-pin C14 port. This 0.91 m (3-ft.) 125V/10A cord features 18 AWG, a flexible SJT jacket and fully molded ends for optimum performance.- Conforms to hospital-grade power cord standards- Tested to ANSI/UL 62 and 817 and CAN/CSA C22.2 no. 21 and 49- NEMA 5-15P-HG hospital-grade plug- 125V/10A rating- Fully molded ends- Connects computers and peripherals to a grounded hospital-grade AC outlet- Ideal for replacing an old or lost cord - Features C13 female connector and NEMA 5-15P-HG male connector- 18 AWG- Flexible SJT jacket
3-ft. (0.91 m) High Speed with Ethernet HDMI cable v1.4Supports transmission speeds up to 18 GbpsBackward compatible to previous HDMI generationsFully molded cables, with Gold plated connectors assures long lifePerfect for connecting an iPad2 to an HDTV (video mirroring) to watch movies, play games, surf the web and display presentations
Heavy-duty extension cord transforms a C20 plug into a NEMA 5-20P plug and extends an existing connection up to 6 ft.Heavy-Duty Extension Cable Connects Devices That Require a Heavy-Gauge ConnectionThis heavy-duty extension cord features 12 AWG wire suitable for high power connections, making it a reliable solution for large server applications that require a higher-rated, heavier-gauge cable. This C19 to 5-20P cord can be used to connect a high-output device to a wall outlet or a PDU or UPS with 5-20R outlets. It is also a recommended replacement or upgrade of a standard power cord provided by the device’s manufacturer. The six-foot (1.8-meter) length allows you flexibility in placing equipment with respect to the power outlet.
USB Type-C to USB Type-A Cable Connects a USB-C Mobile Device to a Wall ChargerThis 20-inch USB-C 3.1 to USB-A cable allows you to connect any device with a USB-C or Thunderbolt 3 port, including MacBooks, Ultrabooks and Chromebooks, to a USB-enabled computer, charger, hard drive or other peripheral for the purpose of charging, powering, syncing or transferring data. Its 20-inch length makes it easy to carry in your briefcase or laptop bag for quick downloads and file transfers on the go.Charges Devices and Transfers Data at Fast USB 3.1 Gen 1 SpeedsThe USB-C to USB-A cable supports USB 3.1 Gen 1 data transfer rates up to 5 Gbps, which is 10 times faster than USB 2.0. The Power Delivery cable also provides power output up to 3A (60 watts), which is more than sufficient for charging, syncing and powering compatible devices. The cable is backward compatible with previous USB generations, allowing you to use it with older equipment.Reversible USB-C Connector Attaches in Either DirectionUnlike traditional USB cables that connect in only one direction, the reversible USB-C male connector plugs into a USB-C or Thunderbolt 3 port in either direction for a fumble-free connection every time.
MFR: Netgear, Inc
Qty: 1
Part #: GS105NA