10gb Ethernet speed to 300 meters @850nm, OM3 ratedUse with VCSEL and LED laser light sourcesHigh-Speed, High-Bandwidth, Low-CostBackward compatible with legacy LAN'sIdeal for Fibre Channel (SAN) applicationsIEEE 802.3ae and TIA LOMMF compliant
Tripp Lite's P046-06N six inch plug adapter has a locking 125V 20A (NEMA L5-20P) input plug, and a straight-blade 125V 20A (NEMA 5-20R) output receptacle.- L5-20P to 5-20R Converter- 12AWG, 125V, 20A- UL Listed
Rollover Console Cable Converts a Straight-Through Ethernet Cable to a Rollover CableThis Cisco console rollover cable connects to the end of any standard RJ45 Ethernet cable and internally rolls the pins to convert the cable from straight through to rollover. This allows you to create a rollover connection between a computer terminal and the RJ45 console port on a Cisco modem, router, firewall, switch or other serial-based device without having to buy new cabling.Provides Unrestricted Access to Adjacent PortsIn contrast to short M/F plugs that block adjacent RJ45 ports when they are connected, this RJ45 rollover console cable for Cisco products is recommended for console servers and other devices where ports tend to be tightly packed together. The narrow RJ45 male end connects securely to the device, while leaving adjacent ports accessible.Color-Coded to Avoid Misidentification That Can Cause Costly DowntimeThis five-inch Cisco console rollover adapter features a blue PVC jacket and fully molded blue ends. The color-coding allows easy, fast identification in a crowded switch or router and helps prevent the cable from becoming inadvertently disconnected.
The Ideal Solution for Your Cat6 Gigabit Ethernet Networking NeedsRecommended for connecting computers, network adapters, routers, servers, modems, hubs and switches in high-density data centersDesigned for 10/100/1000 Base-T, 100 Mbps TPDDI, 155 Mbps ATM, ISDN, voice, Token Ring Type 3 and EIA/TIA applications Provides high-speed connections up to 550 MHz/1 GbpsFlawless signal delivery with minimal near-end crosstalk levelsReduces impedance and structural return loss compared to standard 100 MHz wireSnagless RJ45 Male ConnectorsMolded snagless boots prevent locking tabs from damage during installationPremium Construction Ensures Error-Free Signal TransferManufactured from 24 AWG 4-pair stranded UTPGold-plated copper contacts for maximum conductivity and minimum data lossIntegral strain relief protects cable and connectors from stress and crackingRugged PVC jacket stands up to long-term useMeets Top Cabling StandardsMeets Cat6 TIA/EIA standardsMeets most other current industry standards, including IEEE 802.3ab, 802.5, ISO/IEC 11801 and ETL (Cat6 draft 11)
Tripp Lite's line of AC power cords offer PC users a solution to their power connectivity problems. This 1.83 m (6-ft.) cable will replace the power cable on most computers and peripherals that have a removable power cord. Cable features an AC style plug (NEMA 5-15P) on one end, and a C5 on the other end.- Plug type - NEMA 5-15P (AC) to C5 (Device)- 18AWG SVT, 2,5A, 125V - 1.83 m (6-ft.) replacement power cable Universal design
This HDMI to Mini-HDMI cable allows you to connect digital cameras, camcorders and other digital devices with a Mini-HDMI connector directly to your standard HDMI-enabled TV. This cable offers the same baseline performance as standard high-speed HDMI cables (including 1080p video resolution), plus an additional dedicated data channel, known as the HDMI Ethernet Channel, for device networking. HDMI Ethernet Channel functionality is only available if both linked devices are HDMI Ethernet Channel-enabled. Cable supports not only the Ethernet component, but also 3D and Audio Return Channel.
Up- and Down-Angle Cat6 Ethernet Cable Connects Equipment in Data Centers and VoIP NetworksThis Cat6 cable is ideal for connecting network components, such as printers, computers, copiers, routers, servers, modems and switches, in hard-to-reach areas of space-constrained high-density data centers. Designed for fast transmission and excellent signal quality, this RJ45 patch cable ensures data transfer speeds up to 1 Gbps throughout your Gigabit Ethernet or VoIP network.Special Slim Design for Better Airflow and Easier Installation in Crowded RacksThis Cat6 UTP patch cord is more than 38% smaller in diameter than standard Cat6a cable. This increases airflow in tight spaces, which helps keep your equipment cool and properly functioning. It also cuts down on clutter in crowded racks and patch panels, and makes the cable easier to install around corners and through cable management panels.Up- and Down-Angle RJ45 Patch Cable Makes Connecting and Disconnecting EasierBoth RJ45 male connectors are designed at 90-degree angles: one upward, the other downward. This helps prevent excessive bending and reduces stress on the cable. This space-saving cable is easy to plug into patch panels, switches and other devices located in a confined area or behind a desk.Blue Jacket to Avoid Misidentification That Can Cause Costly DowntimeThis up/down-angle Cat6 Ethernet cable features a blue PVC jacket and molded blue ends. The blue color allows easy, fast identification in a crowded rack or workstation and helps prevent the cable from becoming inadvertently disconnected.
Tripp Lite's P023-001 converts a NEMA L5-15P plug into a standard NEMA 5-15P plug, making it easy to plug into wall outlets, PDU's, UPS's etc, that do not have L5-15R receptacles. Constructed of heavy duty 3 x14AWG cable, fully molded ends, and rated 120V / 15A .- Converts NEMA L5-15R outlet to NEMA 5-15P plug, 1 ft. length- Heavy Duty 14AWG wire- Fully Molded PVC connectors- 120V, 15A Rated- UL Listed
This HDMI to Mini-HDMI Adapter (F/M) allows connection from your digital camera or camcorder with mini-HDMI port to your HDTV's HDMI input port using a standard HDMI cable or connection or from your HDMI input port to your digital camera/camcorder with mini-HDMI port. 1080p compatible. Gold-plated connectors and compact design.
The N200-025-WH Cat6 Gigabit Molded Patch Cable (M/M) ensures ultra-fast performance throughout your Cat5/5e/6 network application. It connects high-speed network components like computers, printers, video game systems, Blu-ray players, copy machines, routers and modems in a home or office Cat5/5e/6 application.This 25-ft. (7.62 m) white cable is designed for 1000Base-T (1 Gbps Ethernet), 10/100Base-T (Ethernet), 100 Mbps TPDDI, 155 Mbps ATM, ISDN, voice, Token Ring Type 3 and EIA/TIA applications. Manufactured from 24 AWG 4-pair solid UTP with a staggered-pin plug design and male RJ45 connectors, each cable provides high-speed connections up to 550 MHz/1 Gbps and flawless signal delivery, while keeping near-end crosstalk levels to a minimum.The N200-025-WH is constructed of top-quality materials for long life and durability. Corrosion-resistant gold-plated copper contacts provide maximum conductivity and minimize data loss. Integral strain relief gives the cable extra flexibility, reduces stress, and helps the cable and connectors move freely without cracking. Meets most current industry standards, including IEEE 802.3ab, IEEE 802.5, ANSI/EIA/TIA 568, ISO/IEC 11801 and ETL (category 6 draft 11).
MFR: Netgear, Inc
Qty: 1
Part #: GS105NA