The 12-inch PS120410 4-Outlet Power Strip is an appropriate power distribution solution for powering multiple devices in a home, office, warehouse, workbench, rackmount, raceway, retail display or point-of-sale setting. The long 10-foot power cord with NEMA 5-15P plug lets you mount the power strip away from the power source for maximum convenience and flexibility. Place it on the floor, or use the included hardware to install it vertically or horizontally on a wall, workbench or under a counter.Four NEMA 5-15R outlets are arranged in standard 1.77-inch center-to-center spacing for easy connection to equipment. A built-in 15A circuit breaker detects dangerous overloads that could damage valuable equipment and immediately shuts down the PS120410. A transparent switch cover protects against accidental shutdowns. A lighted on/off switch confirms at a glance that the power strip is operating.Ideal Power Distribution- Recommended for industrial, office, retail, rackmount, raceway, workbench and point-of-sale settings- 4 NEMA 5-15R outlets with 1.77 in. center-to-center spacing- 10 ft. power cord with NEMA 5-15P plug- Meets UL1363 (USA) and cUL (Canada) certificationsPremium Safety Features- 15A resettable circuit breaker prevents dangerous overloads- Transparent switch cover eliminates accidental shutdowns- Lighted on/off switch confirms operation at a glanceRugged All-Metal Housing- 12 in. length- Hardware included for mounting on a wall, floor, workbench or under a counter
"Tripp Lite TLM626SA. Surge energy rating: 420 J, AC outlets quantity: 6 AC outlet(s), Nominal input voltage: 120 V. Product color: Yellow, EMI/RFI noise filtering: 20 dB, Country of origin: China. Cable length: 70.9"" (1.8 m), Weight: 23.3 oz (660 g), Width: 2.3"" (58.4 mm). Certification: cULus/RoHS. Package width: 13.7"" (348 mm), Package depth: 5"" (127 mm), Package height: 7.3"" (185.4 mm)"
Delivers power to devices attached to IV poles, crash carts and mobile workstations in operating rooms and other patient care vicinities.4-Outlet Medical-Grade Power Strip with Long 15 ft. Cord Approved for Patient Care VicinitiesTripp Lite's PS-415-HG-OEMRA supplies power to movable plug-connected components mounted to IV poles, mobile carts, crash carts and mobile medical workstations inside and outside patient care vicinities when properly mounted. This includes operating rooms, therapy rooms, imaging environments and administrative areas. Compliant with UL 1363A specifications, this 120V power strip features four NEMA 5-15R-HG hospital-grade outlets.Exclusive, Patented Antimicrobial Protection Fights Healthcare-Acquired Infections (HAIs)The power strip is protected by a patented antimicrobial powder coating with EPA-registered and FDA-compliant silver ionic technology. The antimicrobial surface protection is 99.9 percent effective in inhibiting the growth of bacteria and reducing the risk of HAIs in hospitals and other medical environments. The coating meets the requirements of JIS Z 2801:2000, an international standard for evaluating efficacy in antimicrobial products.Premium Safety Features Help Ensure Proper Power ConnectionsWith no central power switch, this power strip presents no danger of accidental shutoff and cutting off power to essential devices. Two resettable 15-amp circuit breakers will shut down all AC input if the power strip determines the connected equipment load is drawing too much power. Four locking plastic safety covers are included to block access to unused outlets.Ready for Installation in Demanding Medical EnvironmentsThe power strip with 15-foot (4.6-meter) cord also includes a space-saving right-angle NEMA 5-15P-HG plug that helps you connect to a wall outlet located behind furniture that is placed flush against the wall. Built-in mounting flanges and integrated keyhole slots let you install the durable all-metal housing on any mobile cart or IV pole for distributing power to movable rack-, table- and pedestal-mounted equipment.
Tripp Lite's TLP608TEL Surge Suppressor offers economical AC and phone line surge suppression for full protection of workstations, desktop PCs, telecom systems and other sensitive electronics. Built-in AC surge suppression shields connected equipment from damage and performance problems due to transient surges. Set of RJ11 telephone line suppression jacks protect dialup and DSL modem lines, fax machines, cordless phones and more. TLP608TEL offers 6 total outlets, 8 foot cord and diagnostic LED to warn of suppressor damage. AC suppression rated at 990 joules shields equipment from surges and line noise. Attractive gray suppressor housing with keyhole mounting tabs and 1 designated transformer plug outlet offers convenient protection of desktop computer equipment and accessories. $20,000 Ultimate Lifetime Insurance (U.S., Canada, and Puerto Rico only).- 990 joules AC surge suppression shields equipment from the strongest surges and line noise- 6 AC outlets with room for 1 transformer plugs without blocking outlets covers computers and peripherals- Phone line surge suppression protects both dialup and DSL modems, plus fax machines, cordless phones and more (pair of RJ11 jacks, 2 wire, 1 line, includes 6 ft phone cable)- 8 foot AC line cable- Built-in power switch and 15 amp circuit breaker offers power control and overload protection over all outlets- Fail-safe thermal fusing protects against fire and other damage in the event of an extreme, extended overvoltage or surge condition- Diagnostic LEDs confirm surge suppression status- Attractive gray suppressor housing with keyhole mounting tabs allow versatile placement options- UL1449 3rd Edition Rated (500V all modes), UL1363 (Power Tap), UL497A (Communications), Meets FCC part 68 rules, cUL (Canada)- Exceeds IEEE 587 category A & B surge suppression specifications- $20,000 Ultimate Lifetime Insurance (U.S., Canada, and Puerto Rico only)
"Tripp Lite HT10DBS. Surge energy rating: 3570 J, AC outlets quantity: 10 AC outlet(s), Nominal input voltage: 120 V. Product color: Black, EMI/RFI noise filtering: 60 dB, Country of origin: China. Cable length: 94.5"" (2.4 m), Weight: 3.59 lbs (1.63 kg), Width: 14.5"" (368.3 mm). Certification: UL1449/UL1363/UL497A/FCC Part 68/cUL. Package width: 3.1"" (78.7 mm), Package depth: 9.2"" (233.7 mm), Package height: 16.5"" (419.1 mm)"
Isolator Series UL60601-1 Listed Medical Grade Isolation Transformers offer line isolation, continuous noise filtering and enhanced common mode surge suppression. An internal low-impedance isolation transformer component offers 100% isolation from the input AC line. Full UL60601-1 medical-grade listing with hospital-grade plug and outlet receptacles makes Isolator medical-grade transformers ideal for protection of medical electronic equipment in patient-care areas. Faraday shield reduces the cumulative leakage current of the Isolator and connected equipment to levels less than 100 microamps. Secondary neutral-to-ground bonding virtually eliminates common mode noise, providing an isolated neutral-ground reference for sensitive equipment, and an inexpensive alternative to dedicated circuits and site electrical upgrades. Removes EMI/RFI noise, utility switching transients and harmonics generated by other on-site loads and utility or lightning related surge conditions. Active transformer filtering provides continuous common-mode noise rejection with no wearable parts. Unique ability to reduce surges in the worst of power environments to harmless levels. Reduces 6000V IEEE587 Cat A&B ring wave and combination wave test surges to only 0.5V common mode. Model IS1000HG includes 4 widely spaced NEMA 5-15R hospital-grade output receptacles, a 10-ft. power cord, hospital-grade input plug, circuit breaker overload protection, and lighted power switch. Rugged all-metal unit housing; ships ready for placement in any industrial, medical, office or network environment. PLUG/OUTLETS: Input - NEMA 5-15P Hospital Grade; Output - 4 NEMA 5-15R Hospital Grade ELECTRICAL: 120V AC, 60Hz, 8.3A (Requires NEMA 5-15R wall receptacle)- The IS1000HG Medical Grade Isolation Transformer offers line isolation and continuous noise filtering- Internal low-impedance isolation transformer with Faraday shield offers 100% isolation from the input AC line- Full UL60601-1 medical-grade listing with hospital-grade plug and outlet receptacles makes Isolator Hospital Grade transformers ideal for the protection of- sensitive electronic equipment in patient-care areas- Reduces the cumulative leakage current of the Isolator and connected equipment to levels less than 100 microamps- Secondary neutral to ground bonding eliminates common mode noise, providing an isolated ground reference for sensitive equipment- Serves as an inexpensive alternative to the installation of dedicated circuits and site electrical upgrades- Removes EMI/RFI noise, utility switching transients, load generated harmonics and ground loops- Active transformer filtering offers continuous common-mode noise rejection with no wearable parts, uniquely able to reduce surges in the worst of power- environments to harmless levels- Reduces 6000V IEEE587 Cat A&B ring wave and combination wave test surges to only 0.5V common mode- Includes 4 widely spaced NEMA5-15R hospital grade output receptacles, a 10-ft power cord, hospital grade input plug, circuit breaker overload protection- and lighted power switch- Rugged all-metal unit housing; ships ready for upright tower placement in any industrial, medical, office or network environment
The SPS406HGULTRA Medical-Grade Power Strip is designed with full 60601-1 and 60950-1 compliance, making it ideal for use in all patient-care vicinities, therapy rooms, imaging environments, laboratories and administrative areas. This 120V, 50/60 Hz power strip features a NEMA 5-15P-HG hospital-grade plug and four NEMA 5-15R-HG hospital-grade outlets that include integrated locking safety covers. Plus, 1410 joules of surge suppression prevent dangerous power spikes that can damage connected equipment and destroy data. A 15A resettable circuit breaker also protects your equipment from overloads. An LED indicator tells you power is present and protected from surges (with no ground faults or line/neutral reversals).Mounting slots and flanges let you install the SPS406HGULTRA on a wide variety of surfaces. The all-metal housing ensures safety and is guaranteed to stand up to demanding environments. With a switchless design that prevents accidental shutoff and a six-foot power cord that provides flexibility in placing the power strip, the SPS406HGULTRA is the perfect replacement for all non-compliant power strips.
The PS-410-HGOEMCC Medical-Grade Power Strip supplies power to movable plug-connected components mounted to a rack, table or pedestal in operating rooms, patient-care vicinities, therapy rooms, imaging environments and administrative areas. Compliant with UL 1363A specifications, this 120V, 50/60 Hz power strip features a NEMA 5-15P-HG hospital-grade plug and four NEMA 5-15R-HG hospital-grade outlets.Two built-in resettable 15A circuit breakers control power to all outlets and protect the power strip against overloads. Switchless design prevents the unit from being accidentally shut off. The coiled power cord is 3 ft. long, and can be fully extended to 10 ft.Mounting flanges let you install the PS-410-HGOEMCC on a wide variety of surfaces, such as IV poles, mobile carts, crash carts and mobile medical workstations. The all-metal housing ensures safety and is guaranteed to last a long time in demanding environments.
Tripp Lite's Isobar ISOBLOK2-0 Surge Suppressor is ideal for protecting audio/visual devices and printers. This premium direct plug-in surge suppressor features 2 outlets, diagnostic LED, and 600 joules of energy absorption. An all-metal housing stands up to the toughest environments. $10,000 Ultimate Lifetime Insurance (USA & Canada Only). No warranty cards required for coverage!
In-Line Surge Protector Keeps Your 10G Ethernet Network Equipment SafeIdeal for home/corporate security systems, home theaters, trade shows and other digital signage applications, the B110-SP-CAT protects connected network equipment from damage caused by electrostatic discharge (ESD) and cable discharge events. Just connect it between your source and network device using Cat5/5e/6 cables, such as N001-Series snagless patch cables (sold separately). Note: two B110-SP-CAT surge protectors are required to protect both source and device. Your Last Defense Against Intruding Voltage SpikesSolid-state silicon-avalanche diode technology features low clamping voltage, providing superior protection against ESD and super-fast response time under one nanosecond. Gas discharge modules on all four twisted pairs protect each wire from surges or spikes by dissipating the voltage transient through a contained plasma gas. The B110-SP-CAT meets the following IEC regulations: IEC 61000-4-2 (ESD) +/- 15kV (Air), +/- 8kV (Contact) and IEC 61000-4-5 2kA (8/20µs), 6kV (8/20µs). Ready to Use Right from the Package, So You Can Plug and Play ImmediatelyThis in-line surge protector supports data transmission speeds up to 10 Gbps and 4K resolutions up to 3840 x 2160 at 60 Hz (HDBaseT) without signal degradation. No software, drivers or external power supply is required. The compact metal housing is designed to endure in applications where static discharge is likely to occur. Mounting hardware is included for convenient installation where needed. Be sure the distance between the B110-SP-CAT and the equipment it is protecting is no more than 300 feet. TAA-Compliant for GSA Schedule PurchasesThe B110-SP-CAT is compliant with the Federal Trade Agreements Act (TAA), which makes it eligible for GSA (General Services Administration) Schedule and other federal procurement contracts.
MFR: Netgear, Inc
Qty: 1
Part #: GS105NA