Showing 340–350 of 429 results

Increases the Cable Management Capability of Your 42U Rack CabinetThese single-width rack accessories install in your enclosure using the included hardware to help you reorganize and improve the management of network and power cables. Keyhole slots provide toolless mounting for 0U PDUs, cables and other accessory items that need to be vertically installed in your rack. Two single-width vertical cable management bars with a classic black finish to match your rack are included. They are compatible with all SmartRack 42U floor-standing racks, including wide, deep and expandable models.

Increases the Cable Management Capability of Your 45U Rack CabinetThese single-width rack accessories install in your enclosure using the included hardware to help you reorganize and improve the management of network and power cables. Keyhole slots provide toolless mounting for 0U PDUs, cables and other accessory items that need to be vertically installed in your rack. Two single-width vertical cable management bars with a classic black finish to match your rack are included. They are compatible with all SmartRack 45U floor-standing racks, including wide, deep and expandable models.

SmartRack® SRCAGENUTS is compatible with all square-hole rack enclosure cabinets. Square hole hardware kit has 50 M6 cage nuts and 50 bolts to fasten equipment to square-hole rack-mount rails.

The SRCOOL7KRM Rack-Mounted Air Conditioning Unit pumps 7,000 BTU/h(2.0 kW) of close-coupled cooling power into your IT equipment to prevent shutdowns, malfunctions and failures caused by overheating. This space-saving, energy-efficient unit is perfect for data centers, server rooms, network closets and other environments with heat-sensitive rack-mounted equipment and limited floor space.The self-contained SRCOOL7KRM mounts just like any other rack equipment in 8U of space at the top or bottom of a rack enclosure. A magnetic air dam attaches to the front door of the rack enclosure to ensure that equipment draws cool air from the SRCOOL7KRM instead of drawing warm air from the room. Because it only cools the equipment inside the rack enclosure, the SRCOOL7KRM is much more efficient than solutions that cool an entire room to achieve the same result. The SRCOOL7KRM filters the air, and its built-in evaporator eliminates condensation, as well as the need for a floor drain or water collection tank.The 7-foot cord plugs into a standard 15-amp(NEMA 5-15R) outlet. The unit restarts automatically after power failures, and you can use the built-in timer to schedule unattended shutdown and startup. The intuitive control panel includes a digital display and diagnostic LEDs to communicate operating conditions at a glance.The optional SRCOOLNET2 remote management accessory(sold separately) allows you to monitor temperatures, receive alerts, review logs and control settings over the Ethernet network from any location via SNMP, Web, SSH or telnet. The SRCOOLNET2 accessory also includes an ENVIROSENSE® temperature and humidity sensor that allows you to link cooling output with temperature readings up to 12 feet away.Compact and Efficient Cooling- Saves valuable floor space in IT environments with available rack space- Saves energy with efficient close-coupled cooling, cooling only the equipment inside the rack enclosure instead of the entire room- Provides 7,000 BTU/h(2.0 kW) of cooling capacity in a rack-mounted 8U chassis- Prevents equipment shutdowns, malfunctions and failures caused by overheating and temperature fluctuations- Uses environmentally friendly R410A refrigerantConvenient Operation- Directional output vent aims cool air upward or downward, allowing the unit to operate from the bottom or top of the rack enclosure- Supports unattended shutdown and startup, including automatic restarts after power failures- Intuitive front-panel controls with an informative digital display and diagnostic LEDs- Operates at noise levels comparable to an average office settingRemote Management Support- Optional SRCOOLNET2 remote management accessory(sold separately) allows you to monitor temperatures, receive alerts, review logs and control settings over the Ethernet network from any location via SNMP, Web, SSH or telnet- SRCOOLNET2 includes ENVIROSENSE temperature and humidity sensor that allows you to link cooling operation with temperature readings up to 12 feet awayEasy Installation- Plugs into a standard 15-amp outlet(NEMA 5-15R)- Built-in evaporator eliminates condensation—no floor drain or water collection tank needed- Magnetic air dam attaches to rack enclosure’s front door to optimize airflow- Includes mounting hardware for installation in standard 19-inch rack enclosures

The SRW6UDP SmartRack® 6U Low-Profile Switch-Depth-Plus Wall-Mount Rack Enclosure Cabinet is designed to house EIA-standard 19-inch rack equipment in network wiring closets, retail locations, classrooms, back offices and other areas with limited floor space where you need equipment to be secure, organized and out of the way. Constructed from heavy-duty steel with a durable black powder-coated finish, the cabinet has a maximum load capacity of 200 pounds (90.7 kilograms).The side panels and front door lock securely to help prevent damage, tampering or theft. The front, top, bottom and removable side panels are vented, which allows air to flow freely and keep equipment cool. The reversible front door can open left or right by rotating the cabinet 180° before mounting. Convenient top and bottom ports allow easy cable routing.The SRW6UDP comes fully assembled and ready to mount to the wall, or use an optional SRCASTER rolling caster kit to make it a mobile rack. Square and 12-24 threaded mounting holes and numbered rack spaces make equipment installation easy. The vertical mounting rails adjust in 7/8-inch increments to accommodate equipment up to 20.5 inches deep, such as network switches and patch panels.

The SRW9UG SmartRack® 9U Low-Profile Switch-Depth Wall-Mount Rack Enclosure Cabinet is designed to house EIA-standard 19-inch rack equipment in network wiring closets, retail locations, classrooms, back offices and other areas with limited floor space where you need equipment to be secure, organized and out of the way. Constructed from heavy-duty steel with a durable black powder-coated finish, the cabinet has a maximum load capacity of 200 pounds (90.7 kilograms).The front door features a shatter-resistant clear acrylic window that lets you monitor equipment without unlocking the enclosure. Not only does the window help prevent equipment tampering and reduce acoustic noise, but it also adds visual flair to your IT installation.The side panels and front door lock securely to help prevent damage, tampering or theft. The top, bottom and removable side panels are vented, which allows air to flow freely and keep equipment cool. The reversible front door can open left or right by rotating the cabinet 180 degrees before mounting. Convenient top and bottom ports allow easy cable routing.The SRW9UG comes fully assembled and ready to mount to the wall, or use the optional SRCASTER rolling caster kit (sold separately) to make it a mobile rack. Square and 12-24 threaded mounting holes and numbered rack spaces make equipment installation easy. The vertical mounting rails adjust in 7/8-inch increments to accommodate equipment up to 16.5 inches deep, such as network switches and patch panels.

Prevents Dust, Debris and Moisture from Damaging Rack-Mount Equipment from AboveThis SmartRack® Service Entrance Hood provides cable management and environmental protection at the same time. The black sheet metal hood mounts to the top of your full-size rack enclosure, allowing equipment cables to enter the rack without letting in water, dust and other debris. The SRSEHOOD covers the cable access holes on the rack’s top panel and mitigates infiltration of moisture into the rack. Mounting hardware and rubber gasket material are included.

1U Horizontal Cable Manager Keeps Your Rack Looking Neat and OrganizedEasy to mount on either the front or rear of your rack cabinet or open frame rack, the SmartRack® SRCABLERING1UFC neatly organizes fiber optic, copper and coax cable bundles. This 1U horizontal manager maintains proper bend radius to eliminate stress on the cables connecting your network devices. Open rings and rear grommets allow convenient access to cabling for routing and separation of bundles. The cable manager is made from high-visibility yellow steel to help you identify its contents in a crowded rack. All hardware is included for installation on an EIA-standard 19-inch rack.

"Tripp Lite’s B020-008-17 KVM Switch gives you a rack-mountable keyboard, LCD and touchpad in a single console that occupies only 1U of rack space. Easy to install and use, it’s the optimal solution for controlling up to 8 computers/servers. Increase the number of connected computers to upto 256 by daisy-chaining up to 31 B022-U08 KVM switches The B020-008-17 has a built-in 17” LCD screen that supports video resolutions up to 1280 x 1024. You can switch easily between the 8 ports using on-console push buttons, an on-screen display (OSD) or keyboard hot key commands. Multi-level password security can be set up for an administrator and up to 4 local users to ensure only those with authorization can access the connected computers.This switch controls PS/2 or USB computers/servers using a P774-Series (PS/2) or P776-Series (USB) KVM Cable Kit (one of each is included). An extra HD15 port allows an additional VGA monitor to be connected. Two PS/2 ports also are included on the rear of the unit to allow for connection of a Tripp Lite B051-000 IP Remote Access Unit or an external console. When not in use, the B020-008-17 stores neatly in a rack drawer and pulls out when needed. This KVM console is compatible with all major operating systems (special keys on Mac and Sun keyboards are not supported). Heavy-duty steel housing stands up to frequent use.Saves Valuable Space and Money● Combines an 8-port KVM switch, 17"" LCD screen, full keyboard and touchpad in a 1U rack-mountable drawer● Mounts into 19”-wide rack, 24”-37” deep● Gives you control of up to 8 computers/servers from a single, easily accessible console – ideal when rack space is at a premium● Flip-up/fold-down screen keeps the console from blocking access to rack equipment when not in use● Eliminates need to buy costly separate monitors, keyboards and mice for each computer/serverSimplifies IT Tasks● Switch quickly and easily between the 8 ports via on-console buttons, on-screen display or keyboard hot key commands ● Hot pluggable; add or remove computers without having to power down the switch● Auto-scan mode automatically sequences through all active ports that are accessible to the userLarge 17” LCD● Wide display makes multitasking easier● Supports video resolutions up to 1280 x 1024● DDC emulation allows the video settings of each computer to be automatically adjusted for optimal output to the LCDMulti-Level Password Security● Enhances security by limiting access to an administrator and up to 4 local users● Two-level log-out allows for manual log-out or automatic log-out after a user-defined period of time has passedExpandability and Long-Lasting Reliability● Increase the number of connected computers to up to 256 by daisy-chaining up to 31 B022-U08 KVM switches● Includes additional HD15 VGA monitor port and PS/2 keyboard/mouse ports for connecting an external console or a Tripp Lite B051-000 IP Remote Access Unit● Compatible with all major operating systems for easy integration into your existing structure (special keys on Mac and Sun keyboards are not supported)● Firmware is easily upgradable with included cable and utility● Heavy-duty steel housing stands up to frequent use● Occupies just 1U of space in a rack-mountable drawer● 17” LCD screen supports video resolutions up to 1280 x 1024● Simplifies IT tasks with easy switching between all 8 ports● Provides 2-level password security (administrator and user)● Compatible with all operating systemsSystem Requirements● PS/2 or USB computer ● (1) P774-Series (PS/2) or P776-Series (USB) KVM Cable Kit is required for each connected computer/server ● Compatible with all major operating systems (special keys on Mac and Sun keyboards are supported) ● Power consumption: 120V, 60Hz, 22.8W; 230V, 50Hz, 24W Package Includes● B020-008-17 8-Port Console KVM Switch with 17"" LCD ● P774-Series 6 ft. PS/2 KVM Cable Kit ● P776-Series 6 ft. USB KVM Cable Kit ● C13 to 5-15P power cord ● RJ11 to DB9 firmware upgrade cable ● Owner’s Manual CD"

"Saves Space and MoneyCombines an 8-port KVM switch, 19"" LCD screen, full keyboard and touchpad in a 1U rack-mountable drawerMounts into 19""-wide rack, 26""-38"" deepControl up to 8 servers from a single, easily accessible console – ideal when rack space is at a premiumIncludes eight P778-Series cables that support computers with either PS/2 or USB connectionsFlip-up/fold-down screen keeps the console from blocking access to rack equipment when not in useEliminates need to buy costly separate monitors, keyboards and mice for each computer/serverSimplifies IT TasksSwitch easily between the 8 ports via on-console buttons, on-screen display or hot keys; OSD can be set to English, Spanish, French, German or JapaneseHot pluggable; add or remove computers without having to power down the switchAuto-scan mode automatically sequences through all active ports that are accessible to the userLarge 19"" LCDExtra-wide display makes multitasking easierSupports video resolutions up to 1280 x 1024DDC emulation allows optimal output to the LCDMulti-Level Password SecurityEnhances security by limiting access to an administrator and up to 4 local usersTwo-level log-out allows for manual log-out or automatic log-out after a user-defined period of time has passedExpandability and Long-Lasting ReliabilityIncrease the number of connected computers up to 256 by daisy-chaining up to 31 B022-U08 KVM switchesA console cable kit is included so you can connect the external console port to a keyboard, mouse or monitor, or a B051-000 IP Remote Access UnitAn additional USB port on the front of the unit lets you connect an external USB mouse; a USB port is also available to share a peripheral such as a flash drive or external hard drive with all the connected serversCompatible with all major operating systems for easy integration into your existing structureFirmware is upgradable with included cable and utilityHeavy-duty steel housing stands up to frequent use"