Directs and Disperses Heat from SRCOOL3KTP Air Conditioning UnitThe SRCOOLTPDUCT SmartRack® Exhaust Duct Kit is a venting system accessory for the SRCOOL3KTP Rack-Mounted Air Conditioning Unit (sold separately). It directs and disperses heat from the SRCOOL3KTP through an upper vent into your facility’s dropped ceiling plenum, return air duct or other standard ventilation system. Reduces Your Cooling and Energy CostsBy keeping your rack equipment cool and performing at its peak, the retrofittable SRCOOLTPDUCT helps the SRCOOL3KTP reduce your cooling and energy costs. Ideal for small-space applications where heat is unlikely to disperse on its own, such as an edge micro data center, the SRCOOLTPDUCT installs using the included hardware on the air outlet side of the SRCOOL3KTP’s condenser.
Connects an M.2 Hard Drive to Your PlayStation to Achieve High 10G SpeedsThis M.2 SSD Enclosure adds an external hard drive with high-speed data transmissions to your PlayStation 5® gaming console. Its USB-A connectors plug into the console’s rear USB ports, out of the way and designed not to block any adjacent ports. The pass-through USB connectors support fast USB 3.2 Gen 2 read/write speeds up to 10 Gbps, so you can save game files safely and quickly.Transfers Data at Fast USB 3.2 Gen 2 Speeds with UASP SupportThe U357-1M2-NVMEG2 supports USB 3.2 Gen 2 data transfer rates up to 10 Gbps, which is twice the speed of USB 3.2 Gen 1, to give you more data storage, retrieval and backup capacity. Adds an Array of Memory Devices with No Tools NeededThe hot-swappable enclosure supports multi-size M.2 SSD specifications (42 mm, 60 mm and 80 mm), PCle and NVMe protocol, SSD TRIM and UASP acceleration, and M.2 M-Key and B&M-Key socket. A white LED lets you know when the power is on and the read/write function is occurring.Just Plug and Play for Immediate Use Right Out of the PackageNo software, drivers or external power supply is required. Just slide a compatible SSD card into the enclosure, replace the cover and connect the enclosure to your console. Silicone covers and an aluminum sheet are included to help keep the SSD card safe during use. The bus-powered U357-1M2-NVMEG2 is compatible with Windows 8, 10 and 11. The aluminum case is ventilated to maintain fast heat dissipation, which allows for stable, smooth file transfers.
1U Vented Cantilever Rack Shelf Secures Non-Rack Equipment in Your Data CenterThis SmartRack® fixed shelf supports monitors, wireless access points, tower units and other IT equipment not typically stored in a rack. Made from heavy-duty cold-rolled steel with a durable black powder-coated finish, the SRSHELF2P1USHRT has a maximum load capacity of 40 pounds (18 kilograms). It mounts easily into 1U of space in an EIA-standard 19-inch 2-post or 4-post enclosure or open frame rack using the included hardware.Maximizes Rack Space and Saves Desk or Floor Space in a Busy OfficeThe steel shelf is seven inches (17.8 centimeters) deep for organizing network and other non-rack equipment in your small office or server room. The vented surface allows generous airflow to keep your equipment cool and functioning at its peak. You may mount two SRSHELF2P1USHRT shelves back-to-back in your rack to create a deeper shelf in the same 1U rack space.
2U Vented Rack Shelf Secures Non-Rack Equipment in Your Data CenterThis SmartRack® center-mount shelf supports monitors, wireless access points, tower units and other IT equipment not typically stored in a rack. Made from heavy-duty cold-rolled steel with a durable black powder-coated finish, the SRSHELF2PCENTER has a maximum load capacity of 100 pounds (45 kgs). It mounts easily into 2U of space in a standard 3-inch-deep 2-post open frame rack using the included hardware.Maximizes Rack Space and Saves Desk or Floor Space in a Busy OfficeThe steel shelf is 21.5 inches (55 cm) deep for organizing network and other non-rack equipment in your small office or server room. The vented surface allows generous airflow to keep your equipment cool and functioning at its peak.
1U Vented Rack Shelf Secures Non-Rack Equipment in Your Data CenterThis SmartRack® adjustable-depth shelf supports monitors, wireless access points, tower units and other IT equipment not typically stored in a rack. Made from heavy-duty cold-rolled steel with a durable black powder-coated finish, the SRSHELF4PHDVENT has a maximum load capacity of 250 pounds (113 kilograms). It mounts easily into 1U of space in an EIA-standard 19-inch 4-post enclosure or open frame rack using the included hardware.Maximizes Rack Space and Saves Desk or Floor Space in a Busy OfficeThe steel shelf is 25.38 inches (64.5 centimeters) deep for organizing network and other non-rack equipment in your small office or server room. The vented surface allows generous airflow to keep your equipment cool and functioning at its peak. The side brackets are easily adjustable to the depth of your rack from 25.94 inches (65.9 centimeters) to 40.75 inches (103.5 centimeters).
1U Vented Sliding Rack Shelf Secures Non-Rack Equipment in Your Data CenterThis SmartRack® shelf with sliding side brackets supports monitors, wireless access points, tower units and other IT equipment not typically stored in a rack. Made from heavy-duty cold-rolled steel with a durable black powder-coated finish, the SRSHELF4PSLVENT has a maximum load capacity of 50 pounds (22.7 kilograms). The expandable side rails support installation in racks with front-to-rear rail distances between 28 inches (71 centimeters) and 46 inches (117 centimeters).Maximizes Rack Space and Saves Desk or Floor Space in a Busy OfficeThe steel shelf mounts easily into 1U of space in a standard 4-post open frame rack or rack enclosure using the included hardware. It is 28.3 inches (72 centimeters) deep for organizing network and other non-rack equipment in your small office or server room. The vented surface allows generous airflow to keep your equipment cool and functioning at its peak.
2U Vented Rack Shelf Secures Non-Rack Equipment in Your Data CenterThis SmartRack® adjustable-depth shelf supports monitors, wireless access points, tower units and other IT equipment not typically stored in a rack. Made from heavy-duty cold-rolled steel with a durable black powder-coated finish, the SRSHELF2PUNIV has a maximum load capacity of 60 pounds (27 kilograms) when front-mounted cantilever-style and 100 pounds (45 kilograms) when mid-mounted.Maximizes Rack Space and Saves Desk or Floor Space in a Busy OfficeThe steel shelf mounts easily into 2U of space in a standard three- or six-inch 2-post open frame rack using the included hardware. It is 21.7 inches (55.1 centimeters) deep for organizing network and other non-rack equipment in your small office or server room. The vented surface allows generous airflow to keep your equipment cool and functioning at its peak.
Increase or Decrease the Depth of Your Server Rack by 4 in.This SmartRack® rail-depth adapter kit lets you mount rack equipment so that it either extends four inches (10.2 centimeters) past the front vertical mounting rails or recesses four inches within the rails. This would benefit you, for instance, if you mounted extra-deep equipment that protruded out the front of the rack and prevented you from closing the door. Or it can allow you easier access to front cabling and help cut down on cable strain. Easy Installation Using the Included HardwareThe SRRAILDPTH2U comes with two steel mounting brackets made from heavy-duty steel with a black powder-coated finish to mesh seamlessly with your rack. Connect the 2U extension brackets to the front rails using the included hardware. Position the brackets outside the rails to increase rack depth or inside the rails to decrease rack depth. Then mount the equipment to the brackets. The SRRAILDPTH2U is compatible with EIA-standard 19-inch open frame racks and enclosures.
Wall-Mount Bracket Is the Ideal Alternative to a Full-Size Rack CabinetIf you don’t have enough equipment to justify the purchase of a full-size rack or you don’t have enough space for one, this SmartRack® bracket is the ideal alternative for your home office or small business. Made from heavy-duty laser-cut 14-gauge cold-rolled steel with a durable black powder-coated finish, this 12U wall-mount bracket attaches to the wall of your back office or closet with the included mounting screws.Hinged Bracket Supports EIA-Standard 19 in. Rack EquipmentThe SRWO12UBRKTSHEL houses 12U of compatible 19-inch rack components, including EIA-compliant switches and patch panels by any manufacturer, up to 14.75 inches deep. The 12U wall-mount bracket is hinged to allow open, unrestricted access to equipment and cabling from either the left or right side. Maximum load capacity is 150 pounds (68 kilograms).Rear Cutout Eases Cable InstallationsThe 12U bracket features an open cutout in the rear that allows for cable feeds through the wall to streamline installations and reduce cable clutter. The laser-cut metal bracket’s surfaces and edges are smooth to reduce wear on cable jackets and patch panel equipment.Space-Saving Shelf Allows Easy Storage of Non-Rack ComponentsInstall the steel shelf at the top or bottom of the bracket to hold equipment that is not rack-mountable, including Ethernet routers, wireless access points, tower UPS systems and mini switches. No separate rack-mount shelf accessory is needed.Easy Mounting with the Included HardwareRear keyhole mounting slots are 16 inches apart to align with standard wall-stud placement. Stamped horizontal reinforcement ribs on the back of the bracket provide extra stability. The 12U wall-mount bracket comes with 12-24 mounting screws for installing the bracket and rack equipment.
Wall-Mount Bracket Is the Ideal Alternative to a Full-Size Rack CabinetIf you don’t have enough equipment to justify the purchase of a full-size rack or you don’t have enough space for one, this SmartRack® bracket is the ideal alternative for your home office or small business. Made from heavy-duty laser-cut 14-gauge cold-rolled steel with a durable black powder-coated finish, this 8U wall-mount bracket attaches to the wall of your back office or closet with the included mounting screws.Hinged Bracket Supports EIA-Standard 19 in. Rack EquipmentThe SRWO8UBRKTSHELF houses 8U of compatible 19-inch rack components, including EIA-compliant switches and patch panels by any manufacturer, up to 14.75 inches deep. The 8U wall-mount bracket is hinged to allow open, unrestricted access to equipment and cabling from either the left or right side. Maximum load capacity is 150 pounds (68 kilograms).Rear Cutout Eases Cable InstallationsThe 8U bracket features an open cutout in the rear that allows for cable feeds through the wall to streamline installations and reduce cable clutter. The laser-cut metal bracket’s surfaces and edges are smooth to reduce wear on cable jackets and patch panel equipment.Space-Saving Shelf Allows Easy Storage of Non-Rack ComponentsInstall the steel shelf at the top or bottom of the bracket to hold equipment that is not rack-mountable, including Ethernet routers, wireless access points, tower UPS systems and mini switches. No separate rack-mount shelf accessory is needed.Easy Mounting with the Included HardwareRear keyhole mounting slots are 16 inches apart to align with standard wall-stud placement. Stamped horizontal reinforcement ribs on the back of the bracket provide extra stability. The 8U wall-mount bracket comes with 12-24 mounting screws for installing the bracket and rack equipment.
MFR: Netgear, Inc
Qty: 1
Part #: GS105NA