Houses and powers up to 12 media converters to help you create customized copper-to-fiber or copper-to-copper installations.House, Organize and Power Up to 12 Tripp Lite Media ConvertersThis media converter chassis accommodates as many as 12 Tripp Lite N784-H and N785-H multimedia converters, including SC, ST and SFP fiber types. You can easily install the media converters in the chassis’ input slots using the included mounting brackets and hardware to create a variety of copper-to-fiber or copper-to-copper installations, including singlemode, multimode and open SFP port converters. The N785-CH12 is compatible with N784-H01-SCMM, N784-H01-STMM, N784-H01-SCSM, N785-H01-SCMM, N785-H01-SCSM and N785-H01-SFP converters.Works with DC and AC Power SuppliesThe N785-CH12 is compatible with both DC and AC power supplies, including the preinstalled N785-CH75W-AC with six-foot (1.8-meter) power cord, NEMA 5-15P input and preinstalled glass-tube fuse (two spare fuses are also included). A second power supply may be installed to provide redundant power to the chassis and avoid network downtime. A trigger guard helps prevent the power switch from being turned off accidentally. Note: Only one type of power supply should be used. Do not mix DC and AC power supplies. Tripp Lite’s N785-CH75W-DC power supply is sold separately.Rear Fans Help Prevent OverheatingThree fans built into the rear of the chassis draw air inward to help keep the media converters cool. You may periodically clean the fans by removing the panel assembly.LEDs Keep You Informed at a GlanceGreen LEDs on the front Status Monitoring Panel indicate when a media converter has been correctly installed in each input slot. These LEDs will not illuminate if an input slot is empty or if power is not being properly supplied. Three red LEDs let you know the cooling fans are functioning properly. Another red LED informs you that the chassis is receiving power.Flexibility in Installation Gives You OptionsThe N785-CH12 mounts into 3U of space in your EIA-standard 19-inch rack using the included hardware. It can also rest flat on any desktop or mount on a wall with the use of a shelf (not included) that is securely mounted to a suitable structure. The shelf must support at least 33 pounds (15 kilograms). It should not only be large enough to accommodate the chassis, but also allow sufficient space for adequate ventilation on all sides.
The SRW9UDP SmartRack® 9U Low-Profile Switch-Depth-Plus Wall-Mount Rack Enclosure Cabinet is designed to house EIA-standard 19-inch rack equipment in network wiring closets, retail locations, classrooms, back offices and other areas with limited floor space where you need equipment to be secure, organized and out of the way. Constructed from heavy-duty steel with a durable black powder-coated finish, the cabinet has a maximum load capacity of 200 pounds (90.7 kilograms).The side panels and front door lock securely to help prevent damage, tampering or theft. The front, top, bottom and removable side panels are vented, which allows air to flow freely and keep equipment cool. The reversible front door can open left or right by rotating the cabinet 180° before mounting. Convenient top and bottom ports allow easy cable routing.The SRW9UDP comes fully assembled and ready to mount to the wall, or use an optional SRCASTER rolling caster kit to make it a mobile rack. Square and 12-24 threaded mounting holes and numbered rack spaces make equipment installation easy. The vertical mounting rails adjust in 7/8-inch increments to accommodate equipment up to 20.5 inches deep, such as network switches and patch panels.
"Saves Space and MoneyCombines an 8-port KVM switch, 19"" LCD screen, full keyboard and touchpad in a 1U rack-mountable drawerMounts into 19""-wide rack, 26""-38"" deepControl up to 8 servers from a single, easily accessible console – ideal when rack space is at a premiumIncludes eight P778-Series cables that support computers with either PS/2 or USB connectionsFlip-up/fold-down screen keeps the console from blocking access to rack equipment when not in useEliminates need to buy costly separate monitors, keyboards and mice for each computer/serverSimplifies IT TasksSwitch easily between the 8 ports via on-console buttons, on-screen display or hot keys; OSD can be set to English, Spanish, French, German or JapaneseHot pluggable; add or remove computers without having to power down the switchAuto-scan mode automatically sequences through all active ports that are accessible to the userLarge 19"" LCDExtra-wide display makes multitasking easierSupports video resolutions up to 1280 x 1024DDC emulation allows optimal output to the LCDMulti-Level Password SecurityEnhances security by limiting access to an administrator and up to 4 local usersTwo-level log-out allows for manual log-out or automatic log-out after a user-defined period of time has passedExpandability and Long-Lasting ReliabilityIncrease the number of connected computers up to 256 by daisy-chaining up to 31 B022-U08 KVM switchesA console cable kit is included so you can connect the external console port to a keyboard, mouse or monitor, or a B051-000 IP Remote Access UnitAn additional USB port on the front of the unit lets you connect an external USB mouse; a USB port is also available to share a peripheral such as a flash drive or external hard drive with all the connected serversCompatible with all major operating systems for easy integration into your existing structureFirmware is upgradable with included cable and utilityHeavy-duty steel housing stands up to frequent use"
"Tripp Lite’s B020-008-17 KVM Switch gives you a rack-mountable keyboard, LCD and touchpad in a single console that occupies only 1U of rack space. Easy to install and use, it’s the optimal solution for controlling up to 8 computers/servers. Increase the number of connected computers to upto 256 by daisy-chaining up to 31 B022-U08 KVM switches The B020-008-17 has a built-in 17” LCD screen that supports video resolutions up to 1280 x 1024. You can switch easily between the 8 ports using on-console push buttons, an on-screen display (OSD) or keyboard hot key commands. Multi-level password security can be set up for an administrator and up to 4 local users to ensure only those with authorization can access the connected computers.This switch controls PS/2 or USB computers/servers using a P774-Series (PS/2) or P776-Series (USB) KVM Cable Kit (one of each is included). An extra HD15 port allows an additional VGA monitor to be connected. Two PS/2 ports also are included on the rear of the unit to allow for connection of a Tripp Lite B051-000 IP Remote Access Unit or an external console. When not in use, the B020-008-17 stores neatly in a rack drawer and pulls out when needed. This KVM console is compatible with all major operating systems (special keys on Mac and Sun keyboards are not supported). Heavy-duty steel housing stands up to frequent use.Saves Valuable Space and Money● Combines an 8-port KVM switch, 17"" LCD screen, full keyboard and touchpad in a 1U rack-mountable drawer● Mounts into 19”-wide rack, 24”-37” deep● Gives you control of up to 8 computers/servers from a single, easily accessible console – ideal when rack space is at a premium● Flip-up/fold-down screen keeps the console from blocking access to rack equipment when not in use● Eliminates need to buy costly separate monitors, keyboards and mice for each computer/serverSimplifies IT Tasks● Switch quickly and easily between the 8 ports via on-console buttons, on-screen display or keyboard hot key commands ● Hot pluggable; add or remove computers without having to power down the switch● Auto-scan mode automatically sequences through all active ports that are accessible to the userLarge 17” LCD● Wide display makes multitasking easier● Supports video resolutions up to 1280 x 1024● DDC emulation allows the video settings of each computer to be automatically adjusted for optimal output to the LCDMulti-Level Password Security● Enhances security by limiting access to an administrator and up to 4 local users● Two-level log-out allows for manual log-out or automatic log-out after a user-defined period of time has passedExpandability and Long-Lasting Reliability● Increase the number of connected computers to up to 256 by daisy-chaining up to 31 B022-U08 KVM switches● Includes additional HD15 VGA monitor port and PS/2 keyboard/mouse ports for connecting an external console or a Tripp Lite B051-000 IP Remote Access Unit● Compatible with all major operating systems for easy integration into your existing structure (special keys on Mac and Sun keyboards are not supported)● Firmware is easily upgradable with included cable and utility● Heavy-duty steel housing stands up to frequent use● Occupies just 1U of space in a rack-mountable drawer● 17” LCD screen supports video resolutions up to 1280 x 1024● Simplifies IT tasks with easy switching between all 8 ports● Provides 2-level password security (administrator and user)● Compatible with all operating systemsSystem Requirements● PS/2 or USB computer ● (1) P774-Series (PS/2) or P776-Series (USB) KVM Cable Kit is required for each connected computer/server ● Compatible with all major operating systems (special keys on Mac and Sun keyboards are supported) ● Power consumption: 120V, 60Hz, 22.8W; 230V, 50Hz, 24W Package Includes● B020-008-17 8-Port Console KVM Switch with 17"" LCD ● P774-Series 6 ft. PS/2 KVM Cable Kit ● P776-Series 6 ft. USB KVM Cable Kit ● C13 to 5-15P power cord ● RJ11 to DB9 firmware upgrade cable ● Owner’s Manual CD"
1U Horizontal Cable Manager Keeps Your Rack Looking Neat and OrganizedEasy to mount on either the front or rear of your rack cabinet or open frame rack, the SmartRack® SRCABLERING1UFC neatly organizes fiber optic, copper and coax cable bundles. This 1U horizontal manager maintains proper bend radius to eliminate stress on the cables connecting your network devices. Open rings and rear grommets allow convenient access to cabling for routing and separation of bundles. The cable manager is made from high-visibility yellow steel to help you identify its contents in a crowded rack. All hardware is included for installation on an EIA-standard 19-inch rack.
Prevents Dust, Debris and Moisture from Damaging Rack-Mount Equipment from AboveThis SmartRack® Service Entrance Hood provides cable management and environmental protection at the same time. The black sheet metal hood mounts to the top of your full-size rack enclosure, allowing equipment cables to enter the rack without letting in water, dust and other debris. The SRSEHOOD covers the cable access holes on the rack’s top panel and mitigates infiltration of moisture into the rack. Mounting hardware and rubber gasket material are included.
The SRW9UG SmartRack® 9U Low-Profile Switch-Depth Wall-Mount Rack Enclosure Cabinet is designed to house EIA-standard 19-inch rack equipment in network wiring closets, retail locations, classrooms, back offices and other areas with limited floor space where you need equipment to be secure, organized and out of the way. Constructed from heavy-duty steel with a durable black powder-coated finish, the cabinet has a maximum load capacity of 200 pounds (90.7 kilograms).The front door features a shatter-resistant clear acrylic window that lets you monitor equipment without unlocking the enclosure. Not only does the window help prevent equipment tampering and reduce acoustic noise, but it also adds visual flair to your IT installation.The side panels and front door lock securely to help prevent damage, tampering or theft. The top, bottom and removable side panels are vented, which allows air to flow freely and keep equipment cool. The reversible front door can open left or right by rotating the cabinet 180 degrees before mounting. Convenient top and bottom ports allow easy cable routing.The SRW9UG comes fully assembled and ready to mount to the wall, or use the optional SRCASTER rolling caster kit (sold separately) to make it a mobile rack. Square and 12-24 threaded mounting holes and numbered rack spaces make equipment installation easy. The vertical mounting rails adjust in 7/8-inch increments to accommodate equipment up to 16.5 inches deep, such as network switches and patch panels.
The SRW6UDP SmartRack® 6U Low-Profile Switch-Depth-Plus Wall-Mount Rack Enclosure Cabinet is designed to house EIA-standard 19-inch rack equipment in network wiring closets, retail locations, classrooms, back offices and other areas with limited floor space where you need equipment to be secure, organized and out of the way. Constructed from heavy-duty steel with a durable black powder-coated finish, the cabinet has a maximum load capacity of 200 pounds (90.7 kilograms).The side panels and front door lock securely to help prevent damage, tampering or theft. The front, top, bottom and removable side panels are vented, which allows air to flow freely and keep equipment cool. The reversible front door can open left or right by rotating the cabinet 180° before mounting. Convenient top and bottom ports allow easy cable routing.The SRW6UDP comes fully assembled and ready to mount to the wall, or use an optional SRCASTER rolling caster kit to make it a mobile rack. Square and 12-24 threaded mounting holes and numbered rack spaces make equipment installation easy. The vertical mounting rails adjust in 7/8-inch increments to accommodate equipment up to 20.5 inches deep, such as network switches and patch panels.
The SRCOOL7KRM Rack-Mounted Air Conditioning Unit pumps 7,000 BTU/h(2.0 kW) of close-coupled cooling power into your IT equipment to prevent shutdowns, malfunctions and failures caused by overheating. This space-saving, energy-efficient unit is perfect for data centers, server rooms, network closets and other environments with heat-sensitive rack-mounted equipment and limited floor space.The self-contained SRCOOL7KRM mounts just like any other rack equipment in 8U of space at the top or bottom of a rack enclosure. A magnetic air dam attaches to the front door of the rack enclosure to ensure that equipment draws cool air from the SRCOOL7KRM instead of drawing warm air from the room. Because it only cools the equipment inside the rack enclosure, the SRCOOL7KRM is much more efficient than solutions that cool an entire room to achieve the same result. The SRCOOL7KRM filters the air, and its built-in evaporator eliminates condensation, as well as the need for a floor drain or water collection tank.The 7-foot cord plugs into a standard 15-amp(NEMA 5-15R) outlet. The unit restarts automatically after power failures, and you can use the built-in timer to schedule unattended shutdown and startup. The intuitive control panel includes a digital display and diagnostic LEDs to communicate operating conditions at a glance.The optional SRCOOLNET2 remote management accessory(sold separately) allows you to monitor temperatures, receive alerts, review logs and control settings over the Ethernet network from any location via SNMP, Web, SSH or telnet. The SRCOOLNET2 accessory also includes an ENVIROSENSE® temperature and humidity sensor that allows you to link cooling output with temperature readings up to 12 feet away.Compact and Efficient Cooling- Saves valuable floor space in IT environments with available rack space- Saves energy with efficient close-coupled cooling, cooling only the equipment inside the rack enclosure instead of the entire room- Provides 7,000 BTU/h(2.0 kW) of cooling capacity in a rack-mounted 8U chassis- Prevents equipment shutdowns, malfunctions and failures caused by overheating and temperature fluctuations- Uses environmentally friendly R410A refrigerantConvenient Operation- Directional output vent aims cool air upward or downward, allowing the unit to operate from the bottom or top of the rack enclosure- Supports unattended shutdown and startup, including automatic restarts after power failures- Intuitive front-panel controls with an informative digital display and diagnostic LEDs- Operates at noise levels comparable to an average office settingRemote Management Support- Optional SRCOOLNET2 remote management accessory(sold separately) allows you to monitor temperatures, receive alerts, review logs and control settings over the Ethernet network from any location via SNMP, Web, SSH or telnet- SRCOOLNET2 includes ENVIROSENSE temperature and humidity sensor that allows you to link cooling operation with temperature readings up to 12 feet awayEasy Installation- Plugs into a standard 15-amp outlet(NEMA 5-15R)- Built-in evaporator eliminates condensation—no floor drain or water collection tank needed- Magnetic air dam attaches to rack enclosure’s front door to optimize airflow- Includes mounting hardware for installation in standard 19-inch rack enclosures
Standard-Depth 12U Top Hat Expands Your Rack Application without Adding Floor SpaceThis SmartRack® 12U vertical expansion rack is ideal for users who want to add rack equipment, but have limited floor space in their server room or data center. The SRTH12UB attaches to the top of your already existing SmartRack floor-standing rack, allowing you to expand vertically without taking up any additional floor space. Hardware for assembly and mounting is included.Expanding Upward Keeps Your Costs DownAdding a vertical extension to your existing rack is a practical alternative to expensive upgrades. By adding 12U to the top of your enclosure, you save the time, hassle and expense of purchasing and installing a new larger rack and moving all the equipment.Easy to Integrate into Your Current ApplicationThe SRTH12UB is compatible with standard-depth floor-standing racks (600 millimeters wide, 1050 millimeters deep) with a removable roof panel. Extensions require assembly on top of the rack, allowing the installation of one component at a time. Multiple grounding points are included on the extensions. Note: You do not have to remove the roof panel of the original rack to install the top hat.Keeps Important Equipment SecureThe adjustable mounting rails accommodate standard 19-inch rack equipment. The reversible front door, split rear doors and side panels lock securely to help prevent damage, tampering or theft. The doors, side panels and roof panel are designed for quick release, making it easy to access connected equipment and cabling with little effort. Convenient top access ports and an open bottom allow easy cable routing through the cabinet.Meets Payment Card Industry StandardsThe SRTH12UB provides physical equipment and media security required for PCI DSS (Payment Card Industry Data Security Standard) compliance. This is essential for companies that process, store and/or transmit credit card information.
MFR: Netgear, Inc
Qty: 1
Part #: GS105NA