Showing 20–30 of 32 results

Large Heavy-Duty Wall Bracket Helps You Create Custom Cable Management SchemesThe SmartRack® SRWBWALLBRKTHDL is a black powder-coated metal bracket, measuring 21 inches in length, for easy installation with your wire mesh cable tray. This wedge-shaped bracket allows you to mount sections of cable tray along the wall of your data center, network closet or industrial space to extend your cable management application. It mounts to the wall with user-supplied hardware and then easily snaps into the wire mesh. It fits cable tray sections measuring 150, 300 or 450 millimeters in width, such as SRWB6210STR, SRWB6410STR, SRWB12210STR, SRWB12410STR or SRWB18410STR. For best practice, tray support is recommended approximately every five feet.

Hanging Ceiling Bracket Helps You Create Custom Cable Management SchemesThe SRWB12CROSSBRKT is a black powder-coated metal cross-bracket that allows you to hang wire mesh cable tray from the ceiling of your data center, network closet or industrial space. It attaches to the ceiling with user-supplied hardware and then effortlessly snaps into the wire mesh. For best practice, tray support is recommended approximately every 5-ft. (1.52 m).Designed to Work with Wire Mesh Cable TraysThis bracket is compatible with 300-millimeter cable trays (SRWB12210STR and SRWB12410STR) and M6, M8 and M10 threaded rods (not included).

High-Resiliency Wall Bracket Helps You Create Custom Cable Management SchemesThe SmartRack® SRWBWALLBRKTLD is a black powder-coated metal bracket for easy installation with your wire mesh cable tray. This light-duty horn bracket allows you to mount sections of cable tray along the wall of your data center, network closet or industrial space to complete your cable management application. It mounts to the wall with user-supplied hardware and then easily snaps into the wire mesh. It is compliant with small, lighter-load cable tray sections, such as SRWB6210STR. For best practice, tray support is recommended approximately every five feet.

Heavy-Duty Wall Bracket Helps You Create Custom Cable Management SchemesThe SmartRack® SRWBWALLBRKTHD is a black powder-coated metal bracket, measuring 15 inches in length, for easy installation with your wire mesh cable tray. This wedge-shaped bracket allows you to mount sections of cable tray along the wall of your data center, network closet or industrial space to complete your cable management application. It mounts to the wall with user-supplied hardware and then easily snaps into the wire mesh. It fits cable tray sections measuring 150, 300 or 450 millimeters in width, such as SRWB6210STR, SRWB6410STR, SRWB12210STR, SRWB12410STR or SRWB18410STR. For best practice, tray support is recommended approximately every five feet.

High-Resiliency Strengthening Bar Helps You Create Custom Cable Management SchemesThe SmartRack® SRWBHDCPLR includes a black powder-coated metal strengthening bar and three couplers, each with an M6 flange nut and M6 x 20 carriage bolt for easy installation with your wire mesh cable tray. This kit allows you to connect two straight sections of cable tray to extend your cable management application along the wall, floor or ceiling of your data center, network closet or industrial space. It is also ideal for creating reductions. The SRWBHDCPLR is compatible with 6-, 12- and 18-inch wire mesh cable trays. For best practice, connecting the tray sections at the bottom with an extra coupler (sold separately) is recommended.

Ensures a Proper Bend Radius to Reduce Cable Stress and Keep Your Cable Tray OrganizedThis SmartRack® exit clip helps reduce bend-induced stress, pinching, pressure points and fatigue in your wire mesh cable tray system. It mounts to the cross member of the tray to route copper cables down through an opening in the wire. The SRWBDROP is 45 millimeters wide and snaps to the wires with no hardware needed. You can also snap adjacent exit clips into the tray to expand the width of your bundled cable drop.

Hanging Ceiling Bracket Helps You Create Custom Cable Management SchemesThe SRWB6CROSSBRKT is a black powder-coated metal cross-bracket that allows you to hang wire mesh cable tray from the ceiling of your data center, network closet or industrial space. It attaches to the ceiling with user-supplied hardware and then effortlessly snaps into the wire mesh. For best practice, tray support is recommended approximately every five feet.Designed to Work with Wire Mesh Cable TraysThis bracket is compatible with 150-millimeter cable trays (SRWB6210STR and SRWB6410STR) and M6, M8 and M10 threaded rods (not included).

High-Impact PVC Waterfall Helps You Create Custom Fiber Cable Routing SchemesThe SmartRack® SRFC4WTRFL48 connects to a straight channel section or other fitting in your fiber routing system to allow cabling to cascade over the side. It’s movable, so your fiber cables can leave or enter where needed with a proper bend radius that protects against signal loss and breakage. Made from durable, lightweight PVC material, the waterfall assembles using the included hardware to help keep your fiber optic cable bundles neat and organized. Screws tighten by hand with no tools required to complete a professional, finished look in your data center, network closet or industrial space. Corrugated plastic piping is included for guiding cabling directly into your rack.

High-Strength Wall Bracket Helps You Create Custom Cable Management SchemesThe SmartRack® SRWBWALLBRKT is a black powder-coated metal bracket for easy installation with your wire mesh cable tray. This L-shaped bracket allows you to mount sections of cable tray along the wall of your data center, network closet or industrial space to extend your cable management application. It mounts to the wall with user-supplied hardware and then easily snaps into the wire mesh. It fits cable tray sections measuring 150 to 300 millimeters in width, such as SRWB6210STR, SRWB6410STR, SRWB12210STR and SRWB12410STR. For best practice, tray support is recommended approximately every five feet.

High-Resiliency Hanging Clip Helps You Create Custom Cable Management SchemesThe SRWBUNVCLIP includes 50 black powder-coated metal clips that allow you to hang wire mesh cable tray from the ceiling of your data center, network closet or industrial space. They attach to the ceiling with user-supplied hardware and then effortlessly snap into the wire mesh. For best practice, tray support is recommended approximately every five feet.Designed to Work with Wire Mesh Cable TraysThese hanging clips are compatible with 150-millimeter (SRWB6210STR and SRWB6410STR) and 300-millimeter (SRWB12210STR, SRWB12410STR) cable trays. They also accommodate M6, M8 and M10 threaded rods (not included).