Showing 0–10 of 32 results

Hanging Ceiling Bracket Helps You Create Custom Cable Management SchemesThe SRWB6CROSSBRKT is a black powder-coated metal cross-bracket that allows you to hang wire mesh cable tray from the ceiling of your data center, network closet or industrial space. It attaches to the ceiling with user-supplied hardware and then effortlessly snaps into the wire mesh. For best practice, tray support is recommended approximately every five feet.Designed to Work with Wire Mesh Cable TraysThis bracket is compatible with 150-millimeter cable trays (SRWB6210STR and SRWB6410STR) and M6, M8 and M10 threaded rods (not included).

Toolless Coupler Base Helps You Create Custom Cable Management SchemesThe SmartRack® SRWBTLCPLRBS is a black powder-coated metal coupler for easy installation with your wire mesh cable tray. It connects two straight sections of cable tray to extend your cable management application along the wall, floor or ceiling of your data center, network closet or industrial space. The coupler snaps easily into the wire mesh with no mounting hardware required. Multiple SRWBTLCPLRBS couplers may be needed for wide cable trays. Use with SRWBUNVCPLR Coupler Kit (sold separately) to ensure the best connection.

High-Resiliency Hanging Clip Helps You Create Custom Cable Management SchemesThe SRWBUNVCLIP includes 50 black powder-coated metal clips that allow you to hang wire mesh cable tray from the ceiling of your data center, network closet or industrial space. They attach to the ceiling with user-supplied hardware and then effortlessly snap into the wire mesh. For best practice, tray support is recommended approximately every five feet.Designed to Work with Wire Mesh Cable TraysThese hanging clips are compatible with 150-millimeter (SRWB6210STR and SRWB6410STR) and 300-millimeter (SRWB12210STR, SRWB12410STR) cable trays. They also accommodate M6, M8 and M10 threaded rods (not included).

Ensures a Proper Bend Radius to Reduce Cable Stress and Keep Your Cable Tray OrganizedThis SmartRack® exit clip helps reduce bend-induced stress, pinching, pressure points and fatigue in your wire mesh cable tray system. It mounts to the cross member of the tray to route copper cables down through an opening in the side of the wire mesh. The SRWBWTRFL is 90 millimeters wide and snaps to the wires with no hardware needed. You can also snap adjacent exit clips into the tray to expand the width of your bundled cable drop.Typical Application● Reduce stress, pinching, pressure points and fatigue while dropping cables over the side of the wire mesh cable trayIntroduction Bullets● Maintains a bend radius while dropping cables over the tray’s side● Keeps cables straight and organized when exiting or entering cable tray● Fixed metal waterfall snaps into tray surface with no hardware required● Made from resilient black powder-coated metal designed to lastPackage Includes● SRWBWTRFL Cable Exit Clip/Dropout Waterfall, 90 mm Wide● Installation guide

High-Resiliency Couplers Help You Create Custom Cable Management SchemesThe SmartRack® SRWBUNVCPLR includes 50 black powder-coated metal couplers, each with an M6 flange nut and M6 x 20 carriage bolt for easy installation with your wire mesh cable tray. By creating a secure connection point between two intersecting sections of cable tray in your server room or data center, these couplers help you create sweeps and 90-degree intersections that guide the direction of cabling to your liking.

Cable Ladder Corner Bracket Helps You Create Custom Data-Center Runway SchemesThis exclusive SmartRack® Cable Runway Corner Bracket kit creates a secure connection point between two intersecting sections of cable ladder in your server room or data center. This allows you to create a radius for L-, T- or X-shaped intersections of cable runway and shape the direction of cabling to your liking. The corner support adds a radius that further strengthens and supports the runway, allowing for more voluminous and comprehensive runs. Mounting and installation hardware is included. The corner clamp plates are easy to install and fit solid and tubular steel runway measuring 1.5 x 0.375 inches (38 x 9.5 millimeters). The SRLCRNSPPT is designed for SRCABLELADDER, SRCABLELADDER18 and other compatible 12-inch (305-millimeter) and 18-inch (457-millimeter) straight ladder sections.

Fast Docking Coupler Bars Help You Create Custom Cable Management SchemesThe SmartRack® SRWBTLCPLRBR includes 50 black powder-coated metal coupler bars for easy installation with your wire mesh cable tray. They connect straight sections of cable tray to extend your cable management application along the wall, floor or ceiling of your data center, network closet or industrial space. The coupler bars snap easily into the wire mesh with no mounting hardware required.

Hanging Ceiling Bracket Helps You Create Custom Cable Management SchemesThe SRWB18CROSSBRKT is a black powder-coated metal cross-bracket that allows you to hang wire mesh cable tray from the ceiling of your data center, network closet or industrial space. It attaches to the ceiling with user-supplied hardware and then effortlessly snaps into the wire mesh. For best practice, tray support is recommended approximately every 5-ft. (1.52 m).Designed to Work with Wire Mesh Cable TraysThis bracket is compatible with 450-millimeter cable trays (SRWB18410STR) and M6, M8 and M10 threaded rods (not included).

High-Impact PVC Waterfall Helps You Create Custom Fiber Cable Routing SchemesThe SmartRack® SRFC4WTRFL36 connects to a straight channel section or other fitting in your fiber routing system to allow cabling to cascade over the side. It’s movable, so your fiber cables can leave or enter where needed with a proper bend radius that protects against signal loss and breakage. Made from durable, lightweight PVC material, the waterfall assembles using the included hardware to help keep your fiber optic cable bundles neat and organized. Screws tighten by hand with no tools required to complete a professional, finished look in your data center, network closet or industrial space. Corrugated plastic piping is included for guiding cabling directly into your rack.

High-Impact PVC Drop-Out Helps You Create Custom Fiber Cable Routing SchemesThe SmartRack® SRFC10DROP limits the bend radius of your fiber optic cabling to two inches (50 mm) as it exits from a channel, horizontal T fitting or vertical T. A proper two-inch bend radius protects against signal loss and damage to the cables. Made from durable, lightweight PVC material, this trumpet drop-out connects using the included hardware to help keep your cable bundles neat and organized. Screws and nuts tighten by hand with no tools required to complete a professional, finished look in your data center, network closet or industrial space.