Showing 750–760 of 2866 results

Fits WMRK, ERK (35 space and higher), SCRK; includes service plateTop options accept 10” fans for active thermal management. See pg. 120 for fan and air flow specs.

"- Fully welded construction, solid sides- 2,500 lb. weight capacity- UL Listed in the US and Canada- Seismic certified to the following codes and standards: 2007 & 2010 CBC; 2006, 2009 & 2012 IBC; ASCE 7-05 (2005 Edition) & ASCE 7-10 (2010 Edition) and the 2006 & 2009 editions of NFPA 5000 for use in areas of high seismicity – Zone 4 or Seismic Design Category (SDC) ""D"". These are designed for Mission Critical and/or High-Importance Installations in locations with the highest level of seismicity and top floor or rooftop installations including those within UBC and CBC Essential facilities or IBC, ASCE 7, and NFPA 5000 Seismic Use Group III facilities. For all codes, the Importance factor (Ip) is 1.5. Seismic Certified load capacity of 600 lbs. when used with ERK-Z4 seismic floor anchor brackets.- 16-gauge steel tops, bottoms, & sides- 1 pair fully-adjustable front rackrail- Large cable entry in bottom- Grounding and bonding stud installed in base- Configurable top (44, 40, 35 sp.), solid top with fan KO’s (27, 21, 18 sp.)- Laser KO’s in side panels for cable pass-through (44, 40, 35 sp. only)- Finished in a durable black textured powder coat"

An economical standalone rack with solid sides, the ERK Series can also be ganged to create partitioned multi-bay installations for thermal management control, and security. It is seismically certified to protect your components when installed with ERK-Z4 brackets.

- Host enclosure can be pre-installed on-site- Detachable rack frame can be integrated with equipment and tested off-site- Service stand raises service tracks to bottom of AXS, allowing it to pull out- Standard fixed front and rear 10-32 threaded rackrail with numbered spaces- Includes articulating cable carriers for effective cable management- System includes host cabinet, rack frame, cable carriers, base, and safety leashes- Service tracks and stands sold separatelyRoll entire bays of equipment straight out for service and installation flexibility. A factory-assembled system in an ERK enclosure, this patented design is ideal for access to rear equipment connections.Select an AXS when space-limited environments require equipment bays to be placed up against a wall or back to back and a straight pullout is preferred.

25' D X 81 1/8” H A/V ConfiguredAn economical standalone rack with solid sides, the ERK series can also be ganged to create partitioned multi-bay installations for thermal management control, future growth or other purposes. Seismic certified to protect your components.Fully welded construction for strengthEnclosure sides include top and bottom ventingConvenient lacing points and slotted rail brackets for cable managementStandard front adjustable 10-32 threaded rackrail with numbered spacesIncludes standard configurable rear door and solid front doorComes configured with integrated fan top, vent blockers, and rear door ventIncludes LACE-OP lacer strip, 4 straight and 2 offset lacer bars, 12 Velcro strapsIncludes 20A, 20 outlet corded power strip (PDT-2020C-NS)Includes 10-32 threaded rack screws, 100 qty

Fits in MPR system with 4 controlled fan outletsProportional speed thermostatic fan control extends both equipment and fan life and reduces service calls by varying the fan speed of up to four fans based on temperature. The fan control includes 3 user selectable temperature ranges, a local on/off switch, status LEDs, and a temperature probe with a 5 ft. wire. This control is designed to work specifically with AC fans that are offered by Middle Atlantic Products, or other fans with similar specifications. Max fan load is 1 Amp at 120 volts.Mounts in MPR Series racewaysHas four controlled outlets for fansProportional speed thermostatic control extends equipment and fan lifeCan control up to four fans based on the temperature in the enclosureFeatures three temperature ranges and proportional/full on switch

Includes two fans, cord, hardware and controller; 115V input voltageFan kit for EGR rear door with controllerFans run only when needed, saving energy, noise, and maintenanceIncludes two 69 CFM fans, hardware and cordInput voltage 115V(2) Fan guards included

Flexible mounting with 2 controlled fan outlets and 2 utility outletsProportional speed thermostatic fan control extends both equipment and fan life and reduces service calls by varying the fan speed of up to four fans based on temperature. The fan control includes 3 user selectable temperature ranges, a local on/off switch, status LEDs, and a temperature probe with a 5 ft. wire. This control is designed to work specifically with AC fans that are offered by Middle Atlantic Products, or other fans with similar specifications. Max fan load is 1.5 Amps at 120 volts. The FC-2-215-1C includes two ‘always on’ 15 Amp convenience outlets and is available as an option on the DLBX, see pg. 70.Mounts to rackrail brackets or any flat surfaceHas two controlled outlets for fans plus two 15A convenience outletsProportional speed thermostatic control extends equipment and fan lifeCan control up to four fans based on the temperature in the enclosureFeatures three temperature ranges and proportional/full on switch

An economical solution for smaller systems, this pivoting, sectional wall cabinet provides unparalleled quality and is ideal for use in both secured and unsecured areas.

Offered in solid configurations. Beveled corners provide a stylish modern appearance while hinging either left or right. Black textured powder coat finish. Includes keylock.