Showing 2600–2610 of 2866 results

Blank panels shall be Middle Atlantic Products model # EB1/3. Blank panels shall be 1/3 rackspace in height with a durable black powder coat finish. Blank panels shall be 19” wide. Blank panels shall be GREENGUARD Indoor Air Quality Certified for Children and Schools. Blank panels shall be RoHS EU Directive 2002/95/EC compliant. Blank panels shall be manufactured by an ISO 9001 and ISO 14001 registered company. Blank panels shall be warrantied to be free from defects in material or workmanship under normal use and conditions for the lifetime of the panel.

Economical steel panels with a durable flat black powder coat finish

Blank panels shall be Middle Atlantic Products model # EB4. Blank panels shall be 4 rackspaces in height with a durable black powder coat finish. Blank panels shall be 19” wide. Blank panels shall be GREENGUARD Indoor Air Quality Certified for Children and Schools. Blank panels shall be RoHS EU Directive 2002/95/EC compliant. Blank panels shall be manufactured by an ISO 9001 and ISO 14001 registered company. Blank panels shall be warrantied to be free from defects in material or workmanship under normal use and conditions for the lifetime of the panel.

These chassis are ideal for holding your custom work. With its aesthetically-balanced, screwless flush-mounted faceplate, our premium CH Chassis is equally at home in the back office or very visible locations. Economy model also available.

Fits WMRK, ERK (35 space and higher), SCRK; includes service plateTop options accept 10” fans for active thermal management. See pg. 120 for fan and air flow specs.

"- Fully welded construction, solid sides- 2,500 lb. weight capacity- UL Listed in the US and Canada- Seismic certified to the following codes and standards: 2007 & 2010 CBC; 2006, 2009 & 2012 IBC; ASCE 7-05 (2005 Edition) & ASCE 7-10 (2010 Edition) and the 2006 & 2009 editions of NFPA 5000 for use in areas of high seismicity – Zone 4 or Seismic Design Category (SDC) ""D"". These are designed for Mission Critical and/or High-Importance Installations in locations with the highest level of seismicity and top floor or rooftop installations including those within UBC and CBC Essential facilities or IBC, ASCE 7, and NFPA 5000 Seismic Use Group III facilities. For all codes, the Importance factor (Ip) is 1.5. Seismic Certified load capacity of 600 lbs. when used with ERK-Z4 seismic floor anchor brackets.- 16-gauge steel tops, bottoms, & sides- 1 pair fully-adjustable front rackrail- Large cable entry in bottom- Grounding and bonding stud installed in base- Configurable top (44, 40, 35 sp.), solid top with fan KO’s (27, 21, 18 sp.)- Laser KO’s in side panels for cable pass-through (44, 40, 35 sp. only)- Finished in a durable black textured powder coat"

An economical standalone rack with solid sides, the ERK Series can also be ganged to create partitioned multi-bay installations for thermal management control, and security. It is seismically certified to protect your components when installed with ERK-Z4 brackets.

- Host enclosure can be pre-installed on-site- Detachable rack frame can be integrated with equipment and tested off-site- Service stand raises service tracks to bottom of AXS, allowing it to pull out- Standard fixed front and rear 10-32 threaded rackrail with numbered spaces- Includes articulating cable carriers for effective cable management- System includes host cabinet, rack frame, cable carriers, base, and safety leashes- Service tracks and stands sold separatelyRoll entire bays of equipment straight out for service and installation flexibility. A factory-assembled system in an ERK enclosure, this patented design is ideal for access to rear equipment connections.Select an AXS when space-limited environments require equipment bays to be placed up against a wall or back to back and a straight pullout is preferred.

25' D X 81 1/8” H A/V ConfiguredAn economical standalone rack with solid sides, the ERK series can also be ganged to create partitioned multi-bay installations for thermal management control, future growth or other purposes. Seismic certified to protect your components.Fully welded construction for strengthEnclosure sides include top and bottom ventingConvenient lacing points and slotted rail brackets for cable managementStandard front adjustable 10-32 threaded rackrail with numbered spacesIncludes standard configurable rear door and solid front doorComes configured with integrated fan top, vent blockers, and rear door ventIncludes LACE-OP lacer strip, 4 straight and 2 offset lacer bars, 12 Velcro strapsIncludes 20A, 20 outlet corded power strip (PDT-2020C-NS)Includes 10-32 threaded rack screws, 100 qty

Fits WMRK, ERK (35 space and higher), SCRK; allows use of Duct Cool™ .Adapter tops let the Duct-Cool be mounted to the top of select racks. Includes top and adapter only.