Showing 230–240 of 2866 results

"SRSR Series 19"" Rotating Sliding Rail System. Specify an SRSR for rear access to equipment connections in millwork and cabinets. Available with a 19"" or 23"" useable depth, the SRSR system extends and rotates 90(0) in either direction, making it ideal for smaller millwork and in-wall installations.- Pulls out and rotates for equipment servicing- NEW Removable rack frame allows in-shop integration and on-site installation of equipment, saving time in the field- Simplifies equipment installation in cabinet- Shortens installation & service time- Available in 19"" and 23"" useable depths- Available from 12 space (21"") to 24 space (42"")- Integral cable management system provided- Locks in place at 0, 60, and 90 positions for easy installation and servicing- Ball bearing slides allow smooth rollout- Locks closed with included hardware- Up to 300 pound weight capacity, depending on model"

"SRSR Series 19"" Rotating Sliding Rail System. Specify an SRSR for rear access to equipment connections in millwork and cabinets. Available with a 19"" or 23"" useable depth, the SRSR system extends and rotates 90(0) in either direction, making it ideal for smaller millwork and in-wall installations.- Pulls out and rotates for equipment servicing- NEW Removable rack frame allows in-shop integration and on-site installation of equipment, saving time in the field- Simplifies equipment installation in cabinet- Shortens installation & service time- Available in 19"" and 23"" useable depths- Available from 12 space (21"") to 24 space (42"")- Integral cable management system provided- Locks in place at 0, 60, and 90 positions for easy installation and servicing- Ball bearing slides allow smooth rollout- Locks closed with included hardware- Up to 300 pound weight capacity, depending on model"

Specify an SRSR for easy rear access to equipment connections in millwork, cabinets and flush in-wall installations. Available with a 19” or 23” useable depth, the SRSR system extends and rotates 90º in either direction, making it ideal for smaller systems.

Specify an SRSR for easy rear access to equipment connections in millwork, cabinets and flush in-wall installations. Available with a 19” or 23” useable depth, the SRSR system extends and rotates 90º in either direction, making it ideal for smaller systems.

Specify an SRS for rear access to equipment connections in millwork and cabinets. System extends a full 19” but does not rotate. Good for smaller millwork and in-wall installations.

"Designed to provide the same cable management facilities as our standard riser bases the SRB Series riser bases have been seismic certified to the following codes and standards: 2007 & 2010 CBC; 2006, 2009 & 2012 IBC; ASCE 7-05 (2005 Edition) & ASCE 7-10 (2010 Edition) and the 2006 & 2009 editions of NFPA 5000 for use in areas of high seismicity – Zone 4 or Seismic Design Category (SDC) “D”. These are designed for Mission Critical and/or High-Importance Installations in locations with the highest level of seismicity and top floor or rooftop installations including those within UBC and CBC Essential facilities or IBC, ASCE 7, and NFPA 5000 Seismic Use Group III facilities. For all codes, the Importance factor (Ip) is 1.5. Seismic Certified load capacity of 1,000 lbs (1 Bay), 1,750 lbs (2 Bay), and 2,450 lbs (3 Bay) when used with the appropriate seismic floor anchor brackets. With a standard 24"" height (custom heights from 9""-24""available upon request), these riser bases are constructed of rugged 11-gauge steel. OSHPD approved for fixed equipment anchorage in California healthcare facilities. Available for select enclosures, these riser bases require the use of seismic brackets."

The innovative design allows the rack to pivot open 90° on a floor base to provide quick and convenient access to rear equipment connections eliminating the need for an aisle behind the rack. Specify an SR Series enclosure when space savings is required for heavier installations that will connect to on-wall cabling or pull boxes, and when easy access to rear equipment connections is essential.

Middle Atlantic Products SR28-IVCMF-46 rack accessory Finger kit

"SRSR Series 19"" Rotating Sliding Rail System. Specify an SRSR for rear access to equipment connections in millwork and cabinets. Available with a 19"" or 23"" useable depth, the SRSR system extends and rotates 90(0) in either direction, making it ideal for smaller millwork and in-wall installations.- Pulls out and rotates for equipment servicing- NEW Removable rack frame allows in-shop integration and on-site installation of equipment, saving time in the field- Simplifies equipment installation in cabinet- Shortens installation & service time- Available in 19"" and 23"" useable depths- Available from 12 space (21"") to 24 space (42"")- Integral cable management system provided- Locks in place at 0, 60, and 90 positions for easy installation and servicing- Ball bearing slides allow smooth rollout- Locks closed with included hardware- Up to 300 pound weight capacity, depending on model"

"Seismic certified riser base shall be Middle Atlantic Products model # SRB-3-WRK-2724 to accommodate 3 qty WRK Series racks. Seismic certified riser base shall be constructed of 11-gauge steel and shall be 24"" H x 72.81” W x 27.63” D. Seismic certified riser bases shall be finished with a durable textured black powder coat finish. Seismic Certified Riser Bases shall satisfy the 2007 & 2010 CBC; 2006, 2009 & 2012 IBC; ASCE 7-05 (2005 Edition) & ASCE 7-10 (2010 Edition) and the 2006 & 2009 editions of NFPA 5000 for use in areas of high seismicity, Seismic Use Group III, Zone 4 or Seismic Design Category (SDC) “D” with lateral force requirements for protecting 2,450 lbs. of essential equipment (3 Bay) in upper floor installations when used in conjunction with the WRK-Z4 floor anchor brackets. Rack shall be OSHPD approved for fixed equipment anchorage in California healthcare facilities. SRB shall be GREENGUARD Indoor Air Quality Certified for Children and Schools. SRB shall be RoHS EU Directive 2002 / 95 / EC compliant. Seismic certified riser base shall be warrantied to be free from defects in material or workmanship under normal use and conditions for the lifetime of the product."