Showing 1080–1090 of 2866 results

"EIA compliant 19” wall mount rack shall be Middle Atlantic Products model # DWR-12-17. Overall dimensions shall be 23.4"" W x 28"" H x 17.3"" D. Weight capacity shall be 200 lbs. Tool-Free Quick-Mount™ system enables one-person installation. Useable depth shall be 15” and shall extend into the back pan 3.5”. Center section and back pan shall be 16-gauge steel, phosphate pre-treated and finished in a black textured powder coat. Rackrail shall be constructed of 11-gauge steel with tapped 10-32 mounting holes in universal EIA spacing with black e-coat finish and marked rackspaces. Rack shall be constructed to swing open for component cabling access, center section shall pivot for either left or right opening. Rack shall have a rear knockout panel with 1/2”, 3/4”, 1"", 1-1/2”, 2” and 3” electrical knockouts installed in base, and a rear knockout panel with 1/2”, 3/4”, 1”, 1-1/2”, 2” and 3” electrical knockouts, four Decora® cutouts, and BNC knockouts for UHF/VHF antennas installed in top. Large laser knockout on back pan shall have a 12-1/2” x 12-1/2” cutout for electrical pull-box. Fan knockouts on top and bottom shall allow for installation of up to four 4-1/2"" fans. Rack shall have 2” knockouts, 4” knockouts for Wiremold 4000® Series raceways, and knockouts for UCP Series universal connector panels on the side. Top, bottom and sides shall feature vertical vent pattern. DWR Series enclosures shall satisfy the 2007 & 2010 CBC; 2006, 2009 & 2012 IBC; ASCE 7-05 (2005 Edition) & ASCE 7-10 (2010 Edition) and the 2006 & 2009 editions of NFPA 5000 for use in areas of high seismicity, Seismic Use Group III, Zone 4 or Seismic Design Category (SDC) “D” with lateral force requirements for protecting 140 lbs. of essential equipment in locations with the highest level of seismicity and top floor or rooftop installations with an Importance factor (Ip) of 1.5 when used with DWRSR-ZL Latch. Rack shall be UL Listed in the US and Canada. Rack shall be GREENGUARD Indoor Air Quality Certified for Children and Schools. Rack shall comply with the requirements RoHS EU Directive 2002 / 95 / EC. Rack shall be manufactured by an ISO 9001 and ISO 14001 registered company. Rack shall be warrantied to be free from defects in materials or workmanship under normal use and conditions for the lifetime of the rack."

Quiet, powerful long-pull blower can pull hot air from up to 25 feet away The heart of the system is a unique state-of-the-art fan that is both quiet and powerful. It has the ability to effectively pull heated air from up to 25 feet away, far from the user. Standard unit includes a built-in thermostat preset to turn on at 88ºF and off at 85ºF – so the system only runs when needed. Flexible system installs quickly, easily and can exhaust to any convenient remote location. Long pull vent system quietly manages heat in confined areas Rated 135CFM at 35.7 dB Thermostatic control automatically activates at 88F and turns off at 85F High static pressure blower maintains airflow even through 25 feet of duct Simple installation with flexible positioning options

Middle Atlantic Products DRK19-44-31LRD. Type: Freestanding rack, Rack capacity: 44U, Maximum weight capacity: 9999.9 lbs (4535.9 kg), Product color: Black

Quickly and inexpensively organize desktop processing and test equipment with our DR Series desktop rail racks. Offered in 8 and 12 space sizes, both models extend upward at a gentle slope. Overall width is 19-1/8”, depth is 11-1/2”.

#NAME?

Steel construction, black finish; split doors require less space to open

Chassis support brackets are a simple way to support heavy equipment within the rack and facilitates ventilation of high heat-generating equipment. • Compatible with the following racks when used with Z-rail or Z-rail adapter: MRK, VRK, VMRK • Allows equipment to be placed into the rack without attaching the rack screws – ideal for fast swap outs NOTE: These chassis support angles must be attached to the Z-Rail or to a Z-Rail adapter. These brackets are not compatible with standard L-shaped rackrail without certain hardware or rackrail adjustments.

The DWR Series Wall Racks are now Forward and Lever Lock™ compatible providing maximum mounting capacity on and off the rail and a suite of tool-free accessories making rack installations 5Xs faster!

The Universal Mounting Drawer was designed with an innovative pattern to mount small devices traditionally located outside the rack to the bottom of the drawer. Providing abundant cable management and device tie down points, the unique design accommodates nearly any mounting hole pattern and fastening method. Ideal for securely storing access control, converters, extenders, door contacts, power supplies and other small components.

Steel construction, black finish, 70% open area