Showing 180–190 of 288 results

Lexmark 40X8393 printer/scanner spare part Roller

Lexmark 40X8505 fuser 200000 pages

The operator panel displays the message 80 “Replace maintenance kit” at required maintenance intervals. You must replace the fuser, transfer roller, pick roller, and separation roller at this interval to maintain the print quality and reliability of the printer.Check the 2 digit type code on the fuser, or check Device Information using the embedded web server or the menus page for a replacement part number.There are multiple warnings to indicate that the fuser is nearing end of life and that a maintenance kit is required, including error codes 80.0x, 80.1x, and 80.2x. If you receive error code 80.3x, the fuser has reached its rated life and the printer stops until a maintenance kit is installed. You must install the correct Fuser Maintenance Kit for the type of fuser that is installed in the printer.

Get the Memory That You Need DDR3x16 memory module

Compatible with: Lexmark C935dn Lexmark C935dtn Lexmark C935hdn Lexmark X940e Lexmark X945e

Configure your LexmarkHigh capacity input option with casters. Installs on the right side of the printer or MFP. The 2500-Sheet Tandem Tray or 2x 500-Sheet Tray is required to use the 3000-Sheet tray.Only Letter paper size is supported for card stock and various plain, recycled or bond papers in this tray.Tray-present, paper-present and paper-low sensing are supported.The 2500-Sheet Tandem Tray or 2x 500-Sheet Tray is required to use the 3000-Sheet tray, or to raise the printer or MFP to the correct height for use with the Staple Punch Finisher or the Booklet Finisher.

Lexmark MS810de. Device compatibility: Laser/LED printer, Brand compatibility: Lexmark, Compatibility: MS810de

AFP/IPDS printingPrint either host-based or client-based output on your network-attached Lexmark laser printer. With a Lexmark Card for IPDS option, use your MFP or printer for both network printing and for IBM iSeries (AS/400) or IBM zSeries computer jobs.Print bar codes, forms, publications and graphics closer to your end users giving you the associated cost and time savings from true distributed printing. So now direct your AFP/IPDS output using the TCP/IP protocol.Colour printing to shades of graySupports Function Set 45 (FS 45) for full colour printing. Color Management Object Content Architecture (CMOCA) resource support for colour printing. Colour documents are transformed into black and shades of gray based on the Color Mode setting.Maximise productivityLocate your printer wherever you need it to maximise its productivity. With Lexmark's SmartSwitch auto-emulation sensing built into every Lexmark laser printer, your printer will automatically switch to the proper document language, whether it is IPDS, PostScript or PCL™. Configure IPDS configuration settings using the MarkNet™ print server's resident web server, a browser and the printer's IP address.Notable FeaturesHost Resource Resolution is sensed (Auto) to enable support for 240, 300 and 600 dpi. Supports 2-dimensional bar codes such as PDF 417, DataMatrix, Maxicode and Quick Response(QR). Supports 1-dimensional bar codes such as Code 128, US Postal bar codes including PLANET and Intelligent Mail Container, Royal Mail bar codes including Red Tag, and other retail and postal bar codes.Font Capture to Reduce Network TrafficUsing Print Services Facility (PSF), capture fonts (including Chinese, Korean and Japanese), either TrueType, bitmaps or outlines, to hard disk or to flash memory resulting in reduced network traffic.ConsiderationOnly one of these cards may be used at any time: Forms and Bar Code, Card for IPDS, Card for PRESCRIBE or Lexmark PrintCryption Card. These cards are installed in the same single connector.

Lexmark 40X6406 printer/scanner spare part Roller

Lexmark 40X6581 printer/scanner spare part Roller 1 pc(s)