Showing 80–90 of 92 results

The PR2000RT2UN is a Smart App Sinewave rack/tower convertible UPS with line-interactive topology, surge protection, and battery backup. CyberPower’s Smart App Sinewave series has sine wave output to eliminate power gaps that can be detected by sensitive equipment and cause unexpected shutdowns.The Smart App Sinewave PR2000RT2UN improves battery life through battery equalization technology and Automatic Voltage Regulation (AVR), which corrects minor power fluctuations without switching to battery power. The enhanced chassis design with an easy-to-access toolless front panel, captive screws for battery panel access, and color-coded rear panel make battery changes and installations simple and fast. The PR2000RT2UN also has an innovative LCD panel that rotates 90°, tilts for a better viewing angle, and provides information on 47 different settings including UPS stats, UPS setup and control management, and testing options.This model includes pre-installed remote management card RMCARD205, which provides remote management and configuration of the UPS via a standard web browser or network management system.With a $400,000 connected equipment guarantee and a three-year warranty, you can trust CyberPower’s commitment to the quality of the PR2000RT2UN.Battery BackupSupplies power long enough for equipment to properly shut down when utility power fails. Helps prevent loss of data and minimizes the component stress caused by a hard shutdown.Line-Interactive TopologyExists when a line-interactive UPS has an autotransformer that regulates low voltages (e.g., brownouts) and over voltages (e.g., spikes) without having to switch to battery.Automatic Voltage Regulation (AVR)Provides clean, consistent AC power by automatically increasing (boosting) low voltage without using battery power when incoming utility power experiences minor fluctuations.Sine Wave OutputProvides power protection to ENERGY STAR® 6.0 systems with Active PFC power supplies.Battery Equalization TechnologyBattery Equalization is an advanced charging process that maintains the voltages of the batteries at the same level to increase battery life.Fast Charge TechnologyAllows UPS batteries to return to full capacity more rapidly by using a built-in charger inside of each UPS or EBM.Rotatable Multifunction LCD PanelTilts to provide a better viewing angle when the Smart App Sinewave is mounted low. Rotates 90° when placed in a tower format for horizontal viewing. Provides information on 47 different settings that include UPS status, UPS setup and control management, and testing options.Toolless Battery Panel AccessMakes battery replacement fast and simple. The faceplate features side latches for easy removal, and captive screws can be loosened by hand to open the battery cover.Extended Battery Modules (EBMs)Use Fast Charge Technology to quickly restore full backup power to a UPS system. They also extend runtime.Surge ProtectionDiverts excess voltage away from sensitive electronic equipment during an AC power surge or power spike to prevent damage.Data-Line ProtectionPrevents power surges that travel through Ethernet lines from causing damage to electronics.GreenPower UPS™ Bypass DesignIs a patented design that allows utility power to bypass the UPS transformer, when AC power is stable, which reduces energy consumption, noise, and heat buildup.Rack/Tower VersatilityAllows for horizontal rack or vertical tower installation.PowerPanel® Business Edition SoftwareProvides IT professionals with tools for monitoring and managing the UPS and backup power. This software offers remote management functionality. Free software download available. See the Resources tab.ENERGY STARThis model is an ENERGY STAR® certified Uninterruptible Power Supply (UPS) system. ENERGY STAR is the trusted, government-backed symbol for energy-efficient products and practices that help save money and protect the environment.

Smart App UPS | Network and ServersThe CyberPower Smart App Sinewave PR3000LCD mini-tower uninterruptible power supply (UPS) with LCD control panel and pure sine wave output is Active PFC compatible for safeguarding mission-critical servers, telecom equipment, VoIP and internetworking hardware that require seamless pure sine wave power. Its full Automatic Voltage Regulation (AVR) boost/buck technology delivers a consistent and clean AC power, protecting connected equipment and preventing costly business interruptions. This UPS system is ENERGY STAR qualified with patented GreenPower UPS Bypass circuitry to save on energy costs by reducing energy consumption and heat buildup.The LCD control panel provides 41 different settings to check status and customize the operating settings for the PR3000LCD, plus it can be removed and mounted separately from the UPS for ease of use regardless of where the UPS is installed. Functions include menus for checking power status on (11) different parameters, (23) settings for setup and control of the UPS, (3) battery test & calibration options, and (4) selections in the Log menu. With its attached cable the LCD control panel can be removed from the UPS and relocated up to 4.5ft. away from the UPS for ease of viewing when installed in hard to reach locations.The PR3000LCD unit has a capacity of 3000VA/2700Watts, eight (8) NEMA 5-15R & (2) 5-20R receptacles and four (4) maintenance-free, user-replaceable 12V/17.0Ah batteries. This unit offers connectivity via one (1) HID USB, one (1) DB9 serial and one (1) emergency power off (EPO) port. EMI/RFI filters increase the immunity of the load to noise disturbances.This UPS unit incorporates microprocessor-based fully digital control and includes PowerPanel Business Edition providing the user unsurpassed flexibility and control. An optional SNMP / HTTP Remote Management adapter (RMCARD202) supports remote management and control of the PR3000LCD through a standard web browser. A Three-Year Warranty ensures that this UPS has passed our highest quality standards in design, assembly, material or workmanship and further protection is offered by a $375,000 Connected Equipment Guarantee.

The CyberPower Smart App Sinewave PR3000LCDSL mini-tower uninterruptible power supply (UPS) with Multifunction LCD and pure sine wave output is Active PFC compatible for safeguarding mission-critical servers, telecom equipment, VoIP and internetworking hardware that require seamless pure sine wave power. Its full Automatic Voltage Regulation (AVR) boost/buck technology delivers a consistent and clean AC power, protecting connected equipment and preventing costly business interruptions. This UPS system is ENERGY STAR® qualified with patented GreenPower UPS™ Bypass circuitry to save on energy costs by reducing energy consumption and heat buildup.The PR3000LCDSL unit has a capacity of 3000VA/2700Watts, seven total outlets (6) NEMA 5-20R & (1) L5-30R receptacles, a NEMA L5-30P plug, and four (4) maintenance-free, user-replaceable 12V/9.0Ah batteries. The intelligent multifunction LCD panel displays real-time UPS vitals for ease of control. This unit offers connectivity via one (1) HID USB, one (1) DB9 serial and one (1) emergency power off (EPO) port. EMI/RFI filters increase the immunity of the load to noise disturbances.This UPS unit incorporates microprocessor-based fully digital control and includes PowerPanel® Business Edition providing the user unsurpassed flexibility and control. An optional SNMP / HTTP Remote Management adapter (RMCARD202 – RMCARD203) supports remote management and control of the PR3000LCDSL through a standard web browser. A Three-Year Warranty ensures that this UPS has passed our highest quality standards in design, assembly, material and workmanship, further protection is offered by a $375,000 Connected Equipment Guarantee.

The Professional Rackmount LCD Series provides advanced level of power protection to mission-critical servers, telecom equipment, VOIP and internet working hardware. Featuring Pure Sinewave output and Automatic Voltage Regulation (AVR), it can stabilize AC signal or deliver seamless power to connected equipment .The Multifunction LCD Readout indicates critical power/battery conditions. The included PowerPanel® Business Edition management software provides comprehensive network power management including unattended-shutdown, event logging, reporting, and notifications. The patented GreenPower UPS™ technology can reduce energy costs by up to 75% and dissipate 80% less heat than competitive models. An optional SNMP/HTTP Remote Management Capabilities enables remote management of the system through standard web browser. The unique convertible design allows configuration flexibility in either Tower (T) or Rackmount (RM) form.

The professional Rack Mount LCD Series provides an advanced level of power protection to support mission-critical servers, telecom equipment, VOIP and internet working hardware. This series has both a Pure Sinewave waveform and Full Automatic Voltage Regulation(AVR) technology, which delivers a consistent and clean AC signal that protects connected equipment and prevents costly business interruptions. The multifunction LCD readout provides ready access to power/battery condition vitals, such as : Runtime, Load, Temperature, and much more. Bundled PowerPanel® Business Edition Management Software monitors UPS status and can provide unattended shutdown of two serially connected servers. The patented GreenPower UPS™ advanced circuitry reduces UPS energy costs by up to 75% compared to competitive models. You will find 80% less heat dissipation as well. An optional SNMP/HTTP Remote Management adapter supports remote management and control of the system through a standard web browser. The unit's unique convertible design allows for use in either a TOWER(T) or Rackmount(RM) form factor.- GreenPower UPS™ Technology : Energy-Saving UPS- Save upto 75% of electricity- Pure Sine Wave output- Automatic Voltage Regulator (AVR)- PowerPanel® Management software included- Multiple outputs for multiple servers- Multiple communication interfaces- Programmable brownout and over voltage protection- Microprocessor based full digital control- EMI, RFI, Surge and lightning spike protection- Phone/Fax/Modem and DSL/Network protection- Scheduled shutdown- Auto restart/Auto charge- User-replaceable batteries- SNMP/HTTP Adapter(optional)- RM/T configuration- XL battery expansion- Dual PC support- Critical load outlets- Metal housing- Multifunction LCD readout- Audible alarms- Resettable Circuit Breaker

Product OverviewThe CyberPower Smart App Online OL8KRTMB is a 6U rack/tower UPS featuring double-conversion topology for seamless power protection, an intuitive maintenance bypass switch design, and a pre-installed RMCARD205. Ensure maximum efficiency and capacity output with a Power Factor rating (PF) of 1. The energy-saving GreenPower UPS™ ECO Mode enables up to 96% efficiency while reducing power consumption and thermal dissipation. Smart battery management charging technology increases battery life up to 50% and replenishes battery charge from 0-90% in five hours.The OL8KRTMB enhanced LCD control panel functionality provides the ability to change the IP address, view UPS load energy consumptions, and select UPS diagnostic tests.Variable 4-speed fans provide automatic thermal management, based on power load, to reduce noise. A tamper-proof input circuit breaker ensures power is not turned off unexpectedly during service or maintenance. The OL8KRTMB simplifies installation with a quick start guide, user-friendly lifting straps, and an enhanced hanging rack mount rail system.The optional BP240VL3U01 Extended Battery Module expands runtime and speeds restoration of full backup power. The OL8KRTMB comes with a three-year warranty (including batteries) and a $300,000 Connected Equipment Guarantee.Double-Conversion TopologyProvides consistent, clean, and nearly perfect power, regardless of the condition of the incoming power. Never a need to switch to battery as DC power operates 100% of the time. Designed for high-end system components, corporate servers, lab equipment, and other sensitive electronic devices.Sine Wave OutputKeeps sensitive equipment with Active PFC working by preventing unnecessary shutdowns caused by gaps from simulated sine waves.Maintenance Bypass SwitchService or replace the UPS easily without powering down the connected equipment. The patented interlock bracket utilizes a color-coded security screw to simplify and reduce time for maintenance or module replacement.PowerPanel® Business Edition SoftwareProvides tools for easy remote monitoring and managing of the UPS and automates shutdown of multiple devices when needed.RMCARD205Enables remote management of up to 50 clients via a standard web browser, command line interface (CLI), or network management system (NMS) connection.LCD Control PanelDisplays UPS status data and configures operating settings from up to 10 ft. away (DB26 cable not included). The LCD control panel displays and allows configuration of IP address settings when an RMCARD205 is installed.Multiple Language OptionsThe LCD Control Panel can be configured in English, Spanish, French, and German for ease of use.Extended Battery Module (EBM)Extends runtime by adding up to 10 EBMs.Fast Charge TechnologyAllows UPS batteries to return to full capacity more rapidly by utilizing a built-in charger. Restores charge from 0-90% within five hours regardless of the number of EBMs.Smart Battery Management (SBM)Improves and extends the functional life of a UPS battery and reduces excessive heat during work cycles by using a three-cycle charging process.GreenPower UPS™ ECO ModeImproves UPS efficiency up to 96% reducing electrical and cooling costs.Hot-Swappable BatteriesKeeps equipment running by eliminating downtime during UPS power maintenance.Upgradeable UPS FirmwareKeeps equipment running by eliminating downtime during UPS power maintenance.Hanging Rack Mount RailEnsures easy installation and slides out safely with a safety catch.Tamper-Proof Input Circuit BreakerEnsures power is turned off using a tool to eliminate the risk of accidental powering off when not desired during service or maintenance.Critical & Non-Critical Load BanksMaximizes the output of the UPS by scheduling non-critical loads to shut off allowing additional runtime for critical load outlets.Emergency Power Off (EPO)Allows the UPS to be shut off in the event of an emergency, when the EPO port is connected to an EPO switch.Generator CompatibleEnsures a stable sine wave output (free of harmonics and distortion) without switching to battery mode when running on generator input power.Converter ModeProvides the flexibility to set the output frequency, regardless of the input frequency, to match connected equipment by selecting 50Hz or 60Hz output on the LCD control panel.USB & Serial ConnectivityEnables full integration with built-in power management and auto shutdown features on Windows, Linux, and VMware systems through a HID-compliant USB port and Serial port.EMI/RFI FiltersPrevents electromagnetic and radio frequency interference to ensure clean power for connected equipment.Data-Line Surge ProtectionPrevents power surges traveling through telephone and Ethernet lines from causing damage to your equipment.Audible AlarmsIdentifies when the UPS is running on battery power, overloaded, or has a low battery.LED Status LightsIndicates Power On, Line Mode, Battery Mode, Bypass Mode, Fault, Replace Battery.Rack/Tower VersatilityAllows for horizontal rack or vertical tower installation.Connected Equipment GuaranteeAffirms we will replace properly connected equipment if it is damaged by a power surge.

The CyberPower Smart App Online OL8KRT is a 6U rack/tower UPS with double-conversion. It provides sine wave output to multiple types of critical IT infrastructure requiring seamless power protection. The OL8KRT is generator compatible and delivers consistent 200-240 V power with zero-transfer time. Automatic-bypass ensures connected equipment continues to operate seamlessly when an overload or internal fault is detected.The OL8KRT features a removable LCD control panel to reposition it in a more convenient location (with optional DB-26 cable), and it has a RMCARD205 pre-installed network card. Smart-battery management charging technology increases battery life by up to 50%. Fast-charge technology helps replenish battery charge from 0-90% in five hours, regardless of the number of Extended Battery Modules (EBM) connected. The energy-saving GreenPower UPS™ ECO Mode allows the UPS to reach up to 96% efficiency to reduce power consumption and thermal dissipation.This UPS can use the BP240V30ART3U or BP240VL3U01 extended battery module for more runtime. The OL6KRT comes with a three-year warranty (including batteries) and a $300,000 connected equipment guarantee.Double-Conversion TopologyProvides consistent, clean, and nearly perfect sine wave output power, regardless of the condition of input power. UPS systems with this technology operate on isolated DC power 100% of the time and have a zero-transfer time because they electronically switch to battery (vs. using relays which can take 4-12 ms to switch). Double-conversion UPS systems are designed for high-availability applications, precise output voltage regulation (±2%), generator set compatibility, environments with poor power quality, and other sensitive electronic equipment.Sine Wave Output Provides power protection to ENERGY STAR® 6.0 systems with Active PFC power supplies.Removable LCD Control PanelPanel displays 24 UPS status readings and allows configuration of 27 operation settings. The onboard event log will record and display the five most recent UPS system events. The LCD control panel can be removed and mounted in a more convenient location, up to ten feet away from the UPS (with optional DB-26 cable). Users can manage, setup, and control various operation settings, can scroll through multiple UPS status readings, and can run select UPS diagnostic tests.Multiple Language OptionsThe LCD control panel can be configured to English, Spanish, French, or German for use in multiple countries.Extended Battery Module (EBM)Add runtime by connecting more EBMs. The Smart App Online series of UPS systems allow for up to ten EBMs to be connected in a daisy-chain.Fast Charge TechnologyEnables Smart App Online UPS systems with multiple EBMs to charge batteries from 0-90% capacity in five hours. This is possible thanks to the built-in charger in each EBM.Smart Battery Management (SBM)Extends the service life of Smart App Online UPS batteries and reduces excessive heat during charge cycles by using a three-stage charging process. The first stage charges the battery to full capacity. The second stage enters float mode. The third stage turns the charger OFF to allow the batteries to naturally discharge (rest) for up to 27 days or until they reach a low-voltage set point. SBM continuously monitors the UPS to restart the charge cycle as needed, ensuring that runtimes are maintained.GreenPower UPS™ ECO ModeImproves UPS efficiency up to 96% to reduce electrical and cooling costs.Hot-Swappable BatteriesEliminate downtime related to UPS maintenance for continuous power availability.Generator CompatibleMode of operation in which the UPS disregards rapid changes in input frequency like those found in the output waveform of some generator sets. This allows the UPS to continue to operate in normal Online Mode vs. switching to Battery Mode when the power source is a generator set.Converter ModeProvides the ability to set the UPS output frequency (50 Hz or 60 Hz), regardless of the input frequency. This is beneficial where the connected equipment must operate on a different frequency than provided by local electric utility.Local and Remote ManagementMonitor and manage the UPS system locally via USB or serial connection, or remotely via the pre-installed RMCARD205 network card. Access UPS status, configuration settings, event logs, and status records, and more. User can also setup email notifications.Rack or Tower InstallationAll the hardware accessories to rack mount the UPS in a standard 4-post 19” rack, or install as a tower unit, is included at no extra cost.PowerPanel® Business Edition SoftwareA robust and feature rich power monitoring and management tool for physical or virtual environments, PowerPanel Business Edition offers local (Agent) or remote (Client) functionality to automate graceful shutdown of IT equipment. Installing PowerPanel Business Edition Center provides centralized monitoring and management of PPBE Agents and Clients on the local network in addition to all CyberPower devices. PPBE is FREE for download on the Downloads tab above.Three-Year WarrantyCyberPower will repair or replace a defective UPS system (including batteries) within three years of the purchase date.Connected Equipment GuaranteeCyberPower will repair or replace properly connected equipment if it is damaged by a power surge.

The CyberPower Smart App Online OL10KRT is a 6U rack/tower double-conversion UPS. It provides sine wave output to multiple types of critical IT infrastructure requiring seamless power protection. The OL10KRT is generator compatible and delivers consistent 200-240 V power with zero-transfer time. Automatic-bypass ensures connected equipment continues to operate seamlessly when an overload or internal fault is detected.The OL10KRT features a removable LCD control panel to reposition it in a more convenient location (with optional DB-26 cable), and it has a RMCARD205 pre-installed network card. Smart-battery management charging technology increases battery life by up to 50%. Fast-charge technology helps replenish battery charge from 0-90% in five hours, regardless of the number of Extended Battery Modules (EBM) connected. The energy-saving GreenPower UPS™ ECO Mode allows the UPS to reach up to 97% efficiency to reduce power consumption and thermal dissipation.This UPS can use the BP240VL3U01 extended battery module for more runtime. The OL10KRT comes with a three-year warranty (including batteries) and a $300,000 connected equipment guarantee.Double-Conversion TopologyProvides consistent, clean, and nearly perfect sine wave output power, regardless of the condition of input power. UPS systems with this technology operate on isolated DC power 100% of the time and have a zero-transfer time because they electronically switch to battery (vs. using relays which can take 4-12 ms to switch). Double-conversion UPS systems are designed for high-end system components, enterprise servers, lab equipment, and other sensitive electronic devices.Sine Wave Output Provides power protection to ENERGY STAR® 6.0 systems with Active PFC power supplies.Removable LCD Control PanelDisplays 24 UPS status readings and allows configuration of 27 operation settings. The onboard event log will record and display the five most recent UPS system events. The LCD control panel can be removed and mounted in a more convenient location, up to ten feet away from the UPS (with optional DB-26 cable). Users can manage, setup, and control various operation settings, can scroll through multiple UPS status readings and run select UPS diagnostic tests.Multiple Language OptionsThe LCD control panel can be configured to English, Spanish, French, or German for use in multiple countries.Extended Battery Module (EBM)Add runtime by connecting more EBMs. The Smart App Online series of UPS systems allow for up to ten EBMs to be connected in a daisy-chain.Fast Charge TechnologyEnables Smart App Online UPS systems with multiple EBMs to charge batteries from 0-90% capacity in five hours. This is possible thanks to the built-in charger in each EBM.Smart Battery Management (SBM)Extends the service life of Smart App Online UPS batteries and reduces excessive heat during charge cycles by using a three-stage charging process. The first stage charges the battery to full capacity. The second stage enters float mode. The third stage turns the charger OFF to allow the batteries to naturally discharge (rest) for up to 27 days or until they reach a low-voltage set point. SBM continuously monitors the UPS to restart the charge cycle as needed, ensuring that runtimes are maintained.GreenPower UPS™ ECO ModeImproves UPS efficiency up to 97% to reduce electrical and cooling costs.Hot-Swappable BatteriesEliminate downtime related to UPS maintenance for continuous power availability.Generator CompatibleDisregards rapid changes in input frequency like those found in the output waveform of some generator sets. This allows the UPS to continue to operate in normal Online Mode vs. switching to Battery Mode when the power source is a generator set.Converter ModeProvides the ability to set the UPS output frequency (50 Hz or 60 Hz), regardless of the input frequency. This is beneficial where the connected equipment must operate on a different frequency than provided by local electric utility.Local and Remote ManagementMonitor and manage the UPS system locally via USB or serial connection, or remotely via the pre-installed RMCARD205 network card. Access UPS status, configuration settings, event logs, and status records, and more. Users can also setup email notifications.Rack or Tower InstallationAll the hardware accessories to rack mount the UPS in a standard 4-post 19” rack, or install as a tower unit, is included at no extra cost.PowerPanel® Business Edition SoftwareA robust and feature rich power monitoring and management tool for physical or virtual environments, PowerPanel Business Edition offers local (Agent) or remote (Client) functionality to automate graceful shutdown of IT equipment. Installing PowerPanel Business Edition Center provides centralized monitoring and management of PPBE Agents and Clients on the local network in addition to all CyberPower devices. PPBE is FREE for download on the Downloads tab above.Three-Year WarrantyCyberPower will repair or replace a defective UPS system (including batteries) within three years of the purchase date.Connected Equipment GuaranteeCyberPower will repair or replace properly connected equipment if it is damaged by a power surge.

Product OverviewThe CyberPower Smart App Online OL8KRTMB is a 6U rack/tower UPS featuring double-conversion topology for seamless power protection, an intuitive maintenance bypass switch design, and a pre-installed RMCARD205. Ensure maximum efficiency and capacity output with a Power Factor rating (PF) of 1. The energy-saving GreenPower UPS™ ECO Mode enables up to 96% efficiency while reducing power consumption and thermal dissipation. Smart battery management charging technology increases battery life up to 50% and replenishes battery charge from 0-90% in five hours.The OL8KRTMB enhanced LCD control panel functionality provides the ability to change the IP address, view UPS load energy consumptions, and select UPS diagnostic tests.Variable 4-speed fans provide automatic thermal management, based on power load, to reduce noise. A tamper-proof input circuit breaker ensures power is not turned off unexpectedly during service or maintenance. The OL8KRTMB simplifies installation with a quick start guide, user-friendly lifting straps, and an enhanced hanging rack mount rail system.The optional BP240VL3U01 Extended Battery Module expands runtime and speeds restoration of full backup power. The OL8KRTMB comes with a three-year warranty (including batteries) and a $300,000 Connected Equipment Guarantee.Double-Conversion TopologyProvides consistent, clean, and nearly perfect power, regardless of the condition of the incoming power. Never a need to switch to battery as DC power operates 100% of the time. Designed for high-end system components, corporate servers, lab equipment, and other sensitive electronic devices.Sine Wave OutputKeeps sensitive equipment with Active PFC working by preventing unnecessary shutdowns caused by gaps from simulated sine waves.Maintenance Bypass SwitchService or replace the UPS easily without powering down the connected equipment. The patented interlock bracket utilizes a color-coded security screw to simplify and reduce time for maintenance or module replacement.PowerPanel® Business Edition SoftwareProvides tools for easy remote monitoring and managing of the UPS and automates shutdown of multiple devices when needed.RMCARD205Enables remote management of up to 50 clients via a standard web browser, command line interface (CLI), or network management system (NMS) connection.LCD Control PanelDisplays UPS status data and configures operating settings from up to 10 ft. away (DB26 cable not included). The LCD control panel displays and allows configuration of IP address settings when an RMCARD205 is installed.Multiple Language OptionsThe LCD Control Panel can be configured in English, Spanish, French, and German for ease of use.Extended Battery Module (EBM)Extends runtime by adding up to 10 EBMs.Fast Charge TechnologyAllows UPS batteries to return to full capacity more rapidly by utilizing a built-in charger. Restores charge from 0-90% within five hours regardless of the number of EBMs.Smart Battery Management (SBM)Improves and extends the functional life of a UPS battery and reduces excessive heat during work cycles by using a three-cycle charging process.GreenPower UPS™ ECO ModeImproves UPS efficiency up to 96% reducing electrical and cooling costs.Hot-Swappable BatteriesKeeps equipment running by eliminating downtime during UPS power maintenance.Upgradeable UPS FirmwareKeeps equipment running by eliminating downtime during UPS power maintenance.Hanging Rack Mount RailEnsures easy installation and slides out safely with a safety catch.Tamper-Proof Input Circuit BreakerEnsures power is turned off using a tool to eliminate the risk of accidental powering off when not desired during service or maintenance.Critical & Non-Critical Load BanksMaximizes the output of the UPS by scheduling non-critical loads to shut off allowing additional runtime for critical load outlets.Emergency Power Off (EPO)Allows the UPS to be shut off in the event of an emergency, when the EPO port is connected to an EPO switch.Generator CompatibleEnsures a stable sine wave output (free of harmonics and distortion) without switching to battery mode when running on generator input power.Converter ModeProvides the flexibility to set the output frequency, regardless of the input frequency, to match connected equipment by selecting 50Hz or 60Hz output on the LCD control panel.USB & Serial ConnectivityEnables full integration with built-in power management and auto shutdown features on Windows, Linux, and VMware systems through a HID-compliant USB port and Serial port.EMI/RFI FiltersPrevents electromagnetic and radio frequency interference to ensure clean power for connected equipment.Data-Line Surge ProtectionPrevents power surges traveling through telephone and Ethernet lines from causing damage to your equipment.Audible AlarmsIdentifies when the UPS is running on battery power, overloaded, or has a low battery.LED Status LightsIndicates Power On, Line Mode, Battery Mode, Bypass Mode, Fault, Replace Battery.Rack/Tower VersatilityAllows for horizontal rack or vertical tower installation.Connected Equipment GuaranteeAffirms we will replace properly connected equipment if it is damaged by a power surge.

The PR3000RTXL2UHVAN is a high voltage Smart App Sinewave rack/tower convertible UPS with line-interactive topology, surge protection, and battery backup. CyberPower’s Smart App Sinewave series creates a sine wave output devoid of power gaps which could cause unexpected shutdowns of sensitive equipment.The Smart App Sinewave PR3000RTXL2UHVAN improves battery life through battery equalization technology and Automatic Voltage Regulation (AVR), which corrects minor power fluctuations without switching to battery power. The enhanced chassis design with an easy-to-access toolless front panel, captive screws for battery panel access, and color-coded rear panel make battery changes and installations simple and fast. The PR3000RTXL2UHVAN also has an innovative LCD panel that rotates 90°, tilts for a better viewing angle, and provides information on 47 different settings including UPS stats, UPS setup and control management, and testing options.This model accepts the BP48VP2U03 Extended Battery Module (EBM) for expanded runtime during power outages and includes pre-installed RMCARD205 network management card for remote management and control via a standard web browser or network management system.With a $400,000 connected equipment guarantee and a three-year warranty, you can trust CyberPower’s commitment to the quality of the PR3000RTXL2UHVAN.Battery BackupSupplies power long enough for equipment to properly shut down when utility power fails. Helps prevent loss of data and minimizes the component stress caused by a hard shutdown.Line-Interactive TopologyExists when a line-interactive UPS has an autotransformer that regulates low voltages (e.g., brownouts) and over voltages (e.g., spikes) without having to switch to battery.Automatic Voltage Regulation (AVR)Provides clean, consistent AC power by automatically increasing (boosting) low voltage without using battery power when incoming utility power experiences minor fluctuations.Sine Wave OutputProvides power protection to ENERGY STAR® 6.0 systems with Active PFC power supplies.Battery Equalization TechnologyBattery Equalization is an advanced charging process that maintains the voltages of the batteries at the same level to increase battery life.Fast Charge TechnologyAllows UPS batteries to return to full capacity more rapidly by using a built-in charger inside of each UPS or EBM.Rotatable Multifunction LCD PanelTilts to provide a better viewing angle when the Smart App Sinewave is mounted low. Rotates 90° when placed in a tower format for horizontal viewing. Provides information on 47 different settings that include UPS status, UPS setup and control management, and testing options.Toolless Battery Panel AccessMakes battery replacement fast and simple. The faceplate features side latches for easy removal, and captive screws can be loosened by hand to open the battery cover.Extended Battery Modules (EBMs)Use Fast Charge Technology to quickly restore full backup power to a UPS system. They also extend runtime.Surge ProtectionDiverts excess voltage away from sensitive electronic equipment during an AC power surge or power spike to prevent damage.Data-Line ProtectionPrevents power surges that travel through Ethernet lines from causing damage to electronics.GreenPower UPS™ Bypass DesignIs a patented design that allows utility power to bypass the UPS transformer, when AC power is stable, which reduces energy consumption, noise, and heat buildup.Rack/Tower VersatilityAllows for horizontal rack or vertical tower installation.PowerPanel® Business Edition SoftwareProvides IT professionals with tools for monitoring and managing the UPS and backup power. This software offers remote management functionality. Free software download available. See the Resources tab.ENERGY STARThis model is an ENERGY STAR® certified Uninterruptible Power Supply (UPS) system. ENERGY STAR is the trusted, government-backed symbol for energy-efficient products and practices that help save money and protect the environment.