Showing 10–20 of 34 results

"The CRA30002 duct cable manager helps reduce cable stress and organize cable runs in any standard EIA-310 19"" rack enclosure or open frame rack. Mounting hardware is included. The CRA30002 is covered by a 5-year limited warranty."

The CRA60001 M6 cage nut and screw hardware kit allows users to install rack mount equipment in standard EIA-310 square hole rack angles. Each kit includes (50) each M6 cage nuts, screws, and cup washers.

"The CR25U40001 4-post rack can be customized with compatible accessories to meet specific requirements. The rack ships knock-down; assembly is required. It is covered by a 5-year limited warranty.Rack Mounting CompatibilityThe CR25U40001 is guaranteed compatible with all EIA-310 compliant 19"" equipment.Adjustable Rack AnglesVertical rack angles can be adjusted in 1"" increments for mounting depth requirements from 22 to 40 inches. Depth index numbering ensures quick and consistent rail placement. U rack units are numbered front and back for easy equipment installation.Designed for Full Loading StabilityHigh-precision frame design and heavy gauge mounting rails provide a static load rating of 1,323 lbs.Integrated Electrical GroundingConnections are located on the frame for facility grounding."

"The CRA30005 helps improve cooling efficiency and organize cable runs in any standard EIA-310 19"" rack enclosure or open frame rack. Mounting hardware is included. The CRA30005 is covered by a 5-year limited warranty."

The CRA30009 trough system allows users to safely and securely run power distribution on top of rack enclosures. Can be used across multiple racks in a row to create a dedicated path for cable runs, reducing cable stress. This model features toolless mounting to the rack roof panel and has a grounding stud to tie-in to the enclosure and the facility ground. Compatible with the CR42U11001 and CR24U11001 rack enclosures. The CRA30009 comes with a 5-year limited warranty.

"The CRA50006 is a heavy duty 1U shelf with an adjustable mounting depth from 20.6"" to 41.6"" that can support up to 135 lbs of equipment without rack mounts. Compatible with models CR45U40001 and CR25U40001. Required mounting hardware is included. The CRA50006 is covered by a 5-year limited warranty."

"The CR42U11001 includes convenient top panel cable access openings, perforated doors for efficient airflow, adjustable rack angles, toolless vertical PDU mounting, and more. The CR42U11001 ships fully assembled for quick deployment, and can be customized with compatible accessories to meet specific requirements. It is covered by a 5-year limited warranty.Removable RoofThe roof can be removed easily with simple pull pin hinges for access during equipment installation–even with cabling already in place and routed through the cable openings.Perforated Front Door with Curved ProfilePerforated front and rear doors provide ventilation for servers and networking equipment.Reversible DoorThe front door has a simple lift off design for easy removal and reverse installation.Half Height Side PanelsHalf height quick release side panels reduce size and weight for easy handling and access to equipment. Side panels can be locked using a single key with the doors.Cable Access OpeningsLarge toolless cable access slots in the roof provide access for overhead cable egress. The bottom design allows for unobstructed cable access through a raised floor.Rack Mounting CompatibilityThe CR42U11001 is compatible with all EIA-310 compliant 19"" equipment.Adjustable Rack AnglesVertical rack angles can be adjusted in 1/4 inch increments for mounting depth requirements up to 36 inches. Depth index numbering ensures quick and consistent rail placement. U rack units are numbered front and back for easy equipment installation.Split Rear DoorsSplit rear doors improve equipment access and reduce floor space requirements. Only 12.5 inches of clearance is needed behind the enclosures to allow for door swing.Rear Accessory ChannelsRear accessory channels extend the full height of the enclosure. These integrated, adjustable channels provide zero U mounting locations for toolless accessories. Mounting slots are arranged in an industry standard pattern compatible with a variety of accessories. Each channel can accommodate two vertical PDUs or cable managers side by side (four items per enclosure). Channels are pre-installed in the rear of the enclosure but can be moved to other locations.Enhanced Stability DesignA high-precision frame design, heavy gauge mounting rails, and casters provide for 3,000 lbs static (leveling feet) and 2,250 lbs dynamic (caster) load ratings.Rack Row Bolt HardwareAdjacent enclosures can be joined at 24 in centers to match standard data center floor tiles.Integrated Electrical GroundingThe roof, side panels, and doors are grounded to the enclosure frame, which has multiple connections for facility grounding. Front and rear doors include quick release ground wires."

Product OverviewThe CyberPower DOORSENSOR monitors Carbon Rack Enclosure door access and notifies users when a door has been opened or closed. It requires a CyberPower RMCARD205 or RMCARD305 network interface card and ENVIROSENSOR (all sold separately). The DOORSENSOR is covered by a 5-year limited warranty.

This set of steel brackets allows for a CyberPower OR series 1U UPS to be stood up vertically on the floor. The brackets attach to either of side the unit, near the bottom, to provide stability and keep the unit upright.

"The CRA50002 is a 1U 13"" deep cantilever fixed shelf able to support up to 40 lbs of monitors and other IT equipment without rack mounts. Two shelves can be used back-to-back to create a deep shelf in a 2-post open frame rack. Required mounting hardware is included. The CRA50002 is covered by a 5-year limited warranty."