Showing 970–980 of 2387 results

Place your serial printer or modem wherever you want to with a multi-purpose, economical DB25 extension. Extend existing serial or parallel cables...to connect through a switchbox or buffer or to connect to a modem. Remember that all 25 lines connect straight through pin-to-pin, and each cable is foil shielded for EMI/RFI protection. They are available in a variety of lengths and gender combinations. Stock lengths are available fully molded with thumbscrew connectors to provide you with a quick and easy connection each time.

We have an inexpensive solution to the stress of plugging and unplugging cables -- our port saver adapters. This adapter will quickly and easily extend the life of equipment connectors. Each port saver is molded and fully shielded, preventing any unwanted EMI/RFI interference caused from office equipment.

RapidRun® is designed to be the standard for in-wall audio/video installations. Using pre-terminated Break-away flying leads and wall plates with an in-wall runner ensures flexible, efficient, high quality connections for all types of equipment, with no field terminations.Use this CMG-rated Multi-Format Runner for in-wall installations that support high density, multi-format applications. Whether hanging a projector in a modern 21st century classroom or installing a commercial digital signage system, a clean, crisp signal will be delivered every time.

The High Speed HDMI Cable with Built-In Power Inserter 4K60 is the ideal solution for supporting HDMI bus-powered devices such as extenders, active cables, AOC cables or signal-sensing switches. This cable eliminates the need for separate voltage inserters or adapters, which increases reliability.PowerThe power supplies associated with source devices such as computers, teleconferencing codecs, media players and set-top boxes are designed, according to HDMI standards, to deliver a 55mA hot plug supply. When an accessory demands more current than the source can supply, the system may fail to operate dependably. Insufficient power may manifest as a flashing image (HDCP problem), distorted video (EDID related issues), or even a complete loss of the image (hot plug assertion failure). The HDMI Cable with Built-In Power Inserter allows for the necessary and proper voltages for the hardware “handshake”, HDCP key authentication and exchange, EDID information exchange and hot plug connection detect.PerformanceThe attached power inserter isolates the power from the source device and provides dedicated power to support HDMI switching, splitting, and extension accessories. If an installation leverages active cables with embedded chipsets, embedded electronic-to-optical media conversion, signal-sensing, auto-switching or similar devices, then this power inserter will be a critical performance element.

The Flexima UXGA + 3.5mm cable delivers high performance AND flexibility. This ultra-thin cable is highly flexible to make installation in even the tightest areas a breeze. Unlike cheap VGA cables, the Flexima cable will not coil or snag during installation. And, the low profile connector (1.25in width x 1.1in depth) helps you install this cable in places other connectors won't allow. Quality is also proven in the performance of these cables. Featuring double-shielded twisted pairs, and triple-shielded coax, this monitor cable delivers the signal without ghosting or distortion. The 3.5mm breakout cable (18in long) enables installation with most laptop and desktop configurations.Use it for video presentations, home theater and HDTV applications, classroom environments, POS devices, and server rooms. Or simply organize your work area for maximum comfort and efficiency. Will accommodate cable runs up to 100 feet without a booster (in most cases). CL3-rated for in-wall installation.

This cable is an ideal solution for connecting the Mini DisplayPort output of a small laptop or tablet to a computer monitor which accepts a Mini DisplayPort input. This cable carries a digital audio/video signal. Support of a High Bit Rate (HBR) bandwidth means that this cable can carry up to a 4k resolution. Built to DisplayPort 1.2 standards, this cable meets the requirements of high performance applications.

This extension cable is an ideal solution for adding length to an existing Mini DisplayPort cable or extending the fixed Mini DisplayPort cable of a computer monitor. This cable carries a digital audio/video signal. Built to DisplayPort 1.2 standards, this cable meets the requirements of high performance applications.

CMP-rated plenum jacket; low profile RCA connectors and small cable diameter enable easier in-wall installationAudio/video installations in educational and commercial settings often require plenum-rated cabling. Our plenum-rated line was engineered to overcome common challenges faced by installers. Low-profile connectors (1.5in total depth) save valuable space and enable easier in-wall connections. And our small-diameter (0.25in) cable design further reduces the space and clearance required to run the necessary cabling through walls and plenum air spaces.This cable is constructed from three 75 Ohm coaxial cables using 26 AWG center conductors and featuring a tinned copper braid that provides 92% over foil shield. CMP rating provides the fire protection required to run within walls and air plenums without the need for conduit.

Audio/video installations in educational and commercial settings often require plenum-rated cabling. Our plenum-rated line was engineered to overcome common challenges faced by installers.This computer audio/video combination cable is an economic alternative, and saves valuable installation time versus installing and purchasing individual cables. The HD15 connectors are low profile (1.25in total depth) which saves valuable space in the gang box, while the rounded shape (fits 1.25in diameter mounts) accommodates smaller mounts so that the cable can be easily hidden from view. The 3.5mm connectors are also low profile (1.5in total depth) and feature specific breakout lengths to fit your application. The cable is conveniently labeled to identify the 6in breakout for mounting in electrical boxes and the 20in breakout for the display or projector end.This combination cable is constructed from three 30 AWG coaxial plus one 26 AWG twisted pair to ensure RGBHV signal integrity in your installation. The coax cables feature a tinned copper braid that provides 92% minimum shielding. The audio uses 26 AWG fully-shielded conductors to prevent interference from the RGBHV signal. Overall the cable is well constructed to protect and prevent any EMI/RFI interference, and to ensure that the highest quality signal is transmitted for optimal audio/video performance.

Velocity™ Digital Audio Coax Interconnects from Impact Acoustics are a great upgrade from the cables typically included with consumer electronics products. Low-loss 75ohm oxygen-free copper center conductors and foam dielectric provides improved sound quality and performance. The 100% aluminum foil and dual OFC braid shields protect against unwanted noise and interference. Robustly designed molded connectors combine with an ultra-flexible jacket, and allow for easy installation and identification. The 24K gold plated, durable connectors ensure long-lasting performance.- Connectors: RCA Male to RCA Male- 75-ohm oxygen-free copper center conductor delivers high-quality digital audio- 24K gold-plated connectors ensure long-lasting quality- Fully molded connectors provide excellent strain relief- Aluminum foil and oxygen-free copper braided shields provide clear, noise-free, vivid sound- Ultra-flexible PVC jacket for easy installation