Showing 160–170 of 688 results

Cable kit that includes power cables and signal cables for installation of 1 or several modular battery cabinets adjacent to the Galaxy UPS for external batteries. This cable kit is for use with the Galaxy VS Modular Battery Cabinet for 6 smart modular battery strings. One kit required for the full system.

Audible alarmsProvides notification of changing utility power and UPS power conditionsAutomatic self-testPeriodic battery self-test ensures early detection of a battery that needs to be replaced.Battery failure notificationProvides early-warning fault analysis on batteries enabling timely preventive maintenanceBattery replacement without toolsEnables fast battery replacement, lowering Mean Time to Repair (MTTR).Boost Automatic Voltage Regulation (AVR)Preserves battery life and maximizes runtime by correcting low voltages without discharging the battery.Building Wiring Fault IndicatorThis LED informs users of potentially dangerous wiring problems in the wall circuit.Cold-start capableProvides temporary battery power when the utility power is out.Dataline surge protectionProvides protection of connected equipment from power surges on the data lines.Disconnected battery notificationWarns when a battery is not available to provide backup power.Hot-swappable batteriesEnsures clean, uninterrupted power to protected equipment while batteries are being replacedIntelligent battery managementMaximizes battery performance, life, and reliability through intelligent, precision charging.LCD graphics displayText and mimic diagrams that display modes of operation, system parameters and alarms.Lifetime data recovery warrantyProvides peace of mind by providing professional data recovery services in the event data is lost due to the failure of the unit.Resettable circuit breakerEasy recovery from overloads; no need to replace a fuse.Safety-agency approvedEnsures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.Transformer Block SpacingConnect bulky transformer block plugs without covering up other outlets.USB connectivityProvides management of the UPS via a USB port (not available on all models).User-replaceable batteriesIncreases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)

APC SMX2KRMLVNCUS uninterruptible power supply (UPS) Line-Interactive 1.92 kVA 1800 W

APC Metered Rack Power Distribution Units (PDUs) provide active metering to enable energy optimization and circuit protection. User-defined alarm thresholds mitigate risk with real-time local and remote alerts to warn of potential circuit overloads. Metered Rack PDUs provide power utilization data to allow Data Center Managers to make informed decisions on load balancing and right sizing IT environments to lower total cost of ownership. Metered Rack PDUs include real power monitoring, a temperature/humidity sensor port, locking IEC receptacles, and ultra low profile circuit breakers. Users can access and configure Metered Rack PDUs through secure Web, SNMP, or Telnet Interfaces which are complimented by APC Centralized Management platforms using InfraStruxure Central, Operations, Capacity, and Energy Efficiency.

Audible alarmsProvides notification of changing utility power and UPS power conditionsAutomatic self-testPeriodic battery self-test ensures early detection of a battery that needs to be replaced.Battery failure notificationProvides early-warning fault analysis on batteries enabling timely preventive maintenanceBattery replacement without toolsEnables fast battery replacement, lowering Mean Time to Repair (MTTR).Boost Automatic Voltage Regulation (AVR)Preserves battery life and maximizes runtime by correcting low voltages without discharging the battery.Building Wiring Fault IndicatorThis LED informs users of potentially dangerous wiring problems in the wall circuit.Cold-start capableProvides temporary battery power when the utility power is out.Dataline surge protectionProvides protection of connected equipment from power surges on the data lines.Disconnected battery notificationWarns when a battery is not available to provide backup power.Hot-swappable batteriesEnsures clean, uninterrupted power to protected equipment while batteries are being replacedIntelligent battery managementMaximizes battery performance, life, and reliability through intelligent, precision charging.LCD graphics displayText and mimic diagrams that display modes of operation, system parameters and alarms.Lifetime data recovery warrantyProvides peace of mind by providing professional data recovery services in the event data is lost due to the failure of the unit.Resettable circuit breakerEasy recovery from overloads; no need to replace a fuse.Safety-agency approvedEnsures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.Transformer Block SpacingConnect bulky transformer block plugs without covering up other outlets.USB connectivityProvides management of the UPS via a USB port (not available on all models).User-replaceable batteriesIncreases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)

Adjustable voltage sensitivityProvides the ability to adapt the UPS for optimal performance in specific power environments or generator applications.Audible alarmsProvides notification of changing utility power and UPS power conditionsAutomatic self-testPeriodic battery self-test ensures early detection of a battery that needs to be replaced.Battery failure notificationProvides early-warning fault analysis on batteries enabling timely preventive maintenanceBattery replacement without toolsEnables fast battery replacement, lowering Mean Time to Repair (MTTR).Battery-protected and surge-only outletsReserves power capacity and run time for connected equipment that require UPS battery back-up while providing surge only protection for less critical equipmentBoost Automatic Voltage Regulation (AVR)Preserves battery life and maximizes runtime by correcting low voltages without discharging the battery.Building Wiring Fault IndicatorThis LED informs users of potentially dangerous wiring problems in the wall circuit.Cold-start capableProvides temporary battery power when the utility power is out.Dataline surge protectionProvides protection of connected equipment from power surges on the data lines.Disconnected battery notificationWarns when a battery is not available to provide backup power.Hot-swappable batteriesEnsures clean, uninterrupted power to protected equipment while batteries are being replacedIntelligent battery managementMaximizes battery performance, life, and reliability through intelligent, precision charging.LCD graphics displayText and mimic diagrams that display modes of operation, system parameters and alarms.Lifetime data recovery warrantyProvides peace of mind by providing professional data recovery services in the event data is lost due to the failure of the unit.Resettable circuit breakerEasy recovery from overloads; no need to replace a fuse.Safety-agency approvedEnsures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.Transformer Block SpacingConnect bulky transformer block plugs without covering up other outlets.USB connectivityProvides management of the UPS via a USB port (not available on all models).User-replaceable batteriesIncreases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)

One battery string for the Galaxy VS UPS. This string contains 9 Ah batteries.

Smart-UPS On-Line provides high density, true double-conversion on-line power protection for servers, voice / data networks, medical labs, and light industrial applications. Capable of supporting loads from 1 to 20kVA in a rack/tower convertible form, the Smart-UPS On-Line is available from 2U to 12U. Recent family extensions at 15 and 20kVA enable support of power hungry blade servers or heavily loaded equipment racks. When business-critical systems require runtime in hours, not minutes, Smart-UPS On-Line can be configured with matching battery packs to comply with aggressive runtime demands. The included PowerChute management software provides unattended graceful shutdown of network operating systems. All models 5kVA and above include an integrated Network Management Card for remote management (optional on models below 5 kVA). The Smart-UPS On-Line family provides customers with a reliable source of uninterruptible power even in demanding power environments, including very wide input voltage window, extremely tight output voltage regulation, frequency regulation, internal bypass, and input power factor correction.High density, double-conversion on-line power protection with scalable runtimeIncludes: CD with software, Country-specific detachable power cord, Documentation CD, Installation guide, Removable support feet, USB cable, Warranty card

Field-replaceable NMCIntegrated Network Management Card/Display Module can be replaced in the field to minimize downtime disruption in the unlikely event of a failure.High Retention OutletsWith no special power cords required, high retention outlets provide up to twice the holding force to reduce risk of accidental disconnect on 9000 series PDUs.60C Operating TemperatureSelect 9000 series PDUs provide the ability to operate in a maximum ambient air temperature of 60C (140F) at full load ensuring reliability and availability even in today's high density deployments. Other models allow up to 45C (113F).C13/C15 and C19/C21 Hybrid OutletsAvailable on select 9000 series PDUs only, Industry 1st hybrid outlets allow 60C operating temperature at full load, are fully compatible with standard C14 and C20 power cords, and are future proofed for implementation of higher temperature rated devices requiring C16 and C21 power cords.Hydraulic Magnetic Circuit BreakersProvide increased availability by maintaining trip current over a wide temperature range.

APC Rack PDU 9000 Switched, ZeroU, 17.2kW, 208V, (20) C13, (12) C19