Showing 710–720 of 867 results

"Vertiv Liebert APS AS5. Output power capacity: 15 kVA, Output power: 13500 W, Input operation voltage (min): 200 V. Battery voltage: 1.67 V, Typical backup time at full load: 300 min. Product color: Black, Cooling type: Active, Safety: UL 1778 4th Ed and CSA 22.2 No. 107.1. Width: 17.3"" (440 mm), Depth: 31.5"" (800 mm), Height: 27.4"" (695 mm)"

"Vertiv Liebert APS AS4. Output power capacity: 20 kVA, Output power: 18000 W, Input operation voltage (min): 200 V. Battery voltage: 1.67 V, Typical backup time at full load: 300 min. Product color: Black, Cooling type: Active, Safety: IEC/EN/AS 62040-1:2008, UL 1778 4th Ed & CSA 22.2 No. 107.1. Width: 17.3"" (440 mm), Depth: 33.5"" (850 mm), Height: 48.8"" (1240 mm)"

"Vertiv Liebert APS AS5. Output power capacity: 10 kVA, Output power: 9000 W, Input operation voltage (min): 200 V. Battery voltage: 1.67 V, Typical backup time at full load: 300 min. Product color: Black, Cooling type: Active, Safety: UL 1778 4th Ed and CSA 22.2 No. 107.1. Width: 17.3"" (440 mm), Depth: 31.5"" (800 mm), Height: 27.4"" (695 mm)"

"Vertiv Liebert APS AS3. Output power capacity: 15 kVA, Output power: 13500 W, Input operation voltage (min): 200 V. Battery voltage: 1.67 V, Typical backup time at full load: 300 min. Form factor: Rackmount/Tower, Product color: Black, Cooling type: Active. Width: 17.3"" (440 mm), Depth: 31.5"" (800 mm), Height: 41.7"" (1060 mm)"

"Vertiv Liebert APS AS6. Output power capacity: 15 kVA, Output power: 13500 W, Input operation voltage (min): 200 V. Battery voltage: 1.67 V, Typical backup time at full load: 300 min. Product color: Black, Cooling type: Active, Safety: UL 1778 4th Ed and CSA 22.2 No. 107.1. Width: 17.3"" (440 mm), Depth: 33.5"" (850 mm), Height: 38.2"" (970 mm)"

"Vertiv Liebert APS AS6. Output power capacity: 20 kVA, Output power: 18000 W, Input operation voltage (min): 200 V. Battery voltage: 1.67 V, Typical backup time at full load: 300 min. Product color: Black, Cooling type: Active, Safety: UL 1778 4th Ed and CSA 22.2 No. 107.1. Width: 17.3"" (440 mm), Depth: 33.5"" (850 mm), Height: 38.2"" (970 mm)"

"Vertiv Liebert APS AS6. Output power capacity: 20 kVA, Output power: 18000 W, Input operation voltage (min): 200 V. Battery voltage: 1.67 V, Typical backup time at full load: 300 min. Product color: Black, Cooling type: Active, Safety: UL 1778 4th Ed and CSA 22.2 No. 107.1. Width: 17.3"" (440 mm), Depth: 33.5"" (850 mm), Height: 38.2"" (970 mm)"

10/100 BaseT ConnectionConnect the device to a network using a 10 or 100 BaseT connectionBattery failure notificationProvides early-warning fault analysis on batteries enabling timely preventive maintenanceLCD graphics displayText and mimic diagrams that display modes of operation, system parameters and alarms.Rack/Tower convertibleProtects the initial investment in the UPS when migrating from tower to rack-mount environment.SmartSlotCustomize UPS capabilities with management cards.Intelligent battery managementMaximizes battery performance, life, and reliability through intelligent, precision charging.LED IndicatorsProvide easy-to-read status of the unit and utility power conditions.Serial connectivityProvides management of the UPS via a serial port.

APC SMT1500RM2UCUS

Always stay online and prevent data lossAs soon as the power goes out, an APC Smart-UPS immediately provides emergency power to all connected equipment. Because an APC UPS does this automatically, you prevent unwanted failure of, for example, a PC, server or switch. With the APC PowerChute Network Shutdown software you can even have critical IT hardware shut down automatically and in a controlled manner when the battery of the UPS is almost empty. This way you prevent data loss, downtime and physical damage to hardware.SafetyIn addition, a Smart-UPS protects connected devices against peak voltage caused by lightning, among other things. This APC emergency power supply is ideally suited for (small) business use.Battery lifeYou can easily read the expected battery life in the runtime graph, which you can find between the product images. You can easily see how long the UPS supplies emergency power at a certain load.Manage your Smart-UPSThanks to the pre-installed network card (ap9641), you can easily connect the APC UPS to the network. This way you can monitor and manage the UPS remotely (SNMP) and the UPS can send a shutdown signal to multiple physical and/or virtual servers using PowerChute Network Shutdown software.PowerChute Network ShutdownPowerChute Network Shutdown is UPS management software that works with the UPS Network Management Card to protect Windows, Linux and Host ESXi, as well as hyperconverged and virtual infrastructure*. In the event of a power outage, PowerChute can properly shut down your virtual machines and the preconfigured boot sequence ensures they are turned back on.*An additional license is required for HCI and virtual machine support:1 year: SWPCNS1Y-DIGIUp to (Replace the bold number in the article number for the desired variant)6 years: SWPCNS6Y-DIGIRemote management and monitoring of your networkThe network card can be managed remotely via the easy-to-use web browser interface, remote management software EcoStruxure™ IT (SFTWES1-DIGI) or other SNMP-compatible system. Tip EcoStruxure™ IT also includes the functionalities of the support contract below.Support contractThe optional network card support contract license* ensures you are always up to date and secure and includes additional benefits such as frequent updates with:• New and improved features• Security updates• Advanced support(The support contract functionality is included free of charge in the first year of the UPS)*The above license and available in the variants:1 year: SWNMC3SU-1Y-DIGIUp to (Replace the bold number in the article number for the desired variant)6 years: SWNMC3SU-6Y-DIGIEase of useBy means of physical buttons and an LCD screen make it possible to set and read the basic functionalities.Extend the lifespanThe internal battery cartridge (APCRBC133) can be replaced easily, safely and independently by the user. This without having to switch off the APC SMT1500RMI2UNC or connected equipment. This way you can easily and cheaply extend the lifespan of the APC Smart-UPS and your equipment always remains online.Warranty extensionThe manufacturer's warranty of the SMT1500RMI2UNC is 3 years, with the exception of the battery cartridge, which has a 2-year manufacturer's warranty. Both are extended by 3 years to 6 and 5 years respectively with the APC service pack (WBEXTWAR3YR-SP-03).Ease of useBy means of physical buttons and an LCD screen make it possible to set and read the basic functionalities. Thanks to the included 4-post rail kit, you can easily mount the UPS in a rack.Switched Outlet Groups: Remote reboot and phased start-upThanks to the Switched Outlet Groups, it is possible to configure a phased/delayed power-on per UPS outlet group. This reduces the peak load on the UPS and brings it closer to the constant load, which limits oversizing of the UPS.It is also possible to reset a group of multiple UPS outputs and the equipment connected to them. If SmartConnect Advanced (ERWPLUS1-1Y-DIGI) is used, a UPS with SmartConnect port + Ecostruxure IT Expert (SFTWES1-DIGI) or a network card (ap9640) in combination with Ecostruxure IT Expert (SFTWES1-DIGI), this is even possible remotely.Green PremiumThis label represents Schneider Electric's commitment to delivering products with best-in-class environmental performance. Green Premium promises to comply with the latest regulations, transparency on environmental effects and circular and low CO2 emission products.Green Premium:- Stands for an energy-efficient product that helps our customers achieve their CO2 reduction goals and save energy costs at the same time. The energy efficiency of this product is at least 10% higher than the market average.- Provides insight into the environmental effects of the product, this data is available 24/7 via the digital product environmental profile, see https://checkaproduct.se.com/- Commits to minimal use of hazardous substances within and beyond regulatory compliance (RoHS/REACh)Cold-start capableProvides temporary battery power when the utility power is out.Energy meterProvides actual kilowatt hours of usage for energy conscious users.Green modePatent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.High online efficiencyReduces utlility costs, generates less heat.Intuitive LCD interfaceProvides clear and accurate information in multiple languages with the ability to configure the UPS locally with easy to use navigation keys.Predictive replace battery dateDynamically provides the month and year when battery replacement is recommended to aide in long term maintenance planning.Preinstalled network management cardProvides for remote management and control of the UPS over a network out of the box.Single switched outlet groupSingle outlet group that may be controlled separately from the UPS for discrete reboot of hung devices, sequenced on/off and non-critical load shedding.SmartSlotCustomize UPS capabilities with management cards.Temperature-compensated battery chargingProlongs battery life by regulating the charge voltage according to battery temperature.AvailabilityDisconnected battery notificationWarns when a battery is not available to provide backup power.Automatic restart of loads after UPS shutdownAutomatically starts up the connected equipment upon the return of utility power.Automatic self-testPeriodic battery self-test ensures early detection of a battery that needs to be replaced.Intelligent battery managementMaximizes battery performance, life, and reliability through intelligent, precision charging.Temperature-compensated battery chargingProlongs battery life by regulating the charge voltage according to battery temperature.Boost and Trim Automatic Voltage Regulation (AVR)Gives higher application availability by correcting low and high voltage conditions without using the battery (not available on all models).Power conditioningProtects connected loads from surges, spikes, lightning, and other power disturbances.ManageabilityNetwork manageableProvides remote power management of the UPS over the network.Serial connectivityProvides management of the UPS via a serial port.Audible alarmsActively let you know if the unit is on battery, if the battery is low or if there is an overload condition.Disconnected battery notificationWarns when a battery is not available to provide backup power.LED status indicatorsQuickly understand unit and power status with visual indicators.USB connectivityProvides management of the UPS via a USB port (not available on all models).SafetySafety-agency approvedEnsures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.Marketing FeaturesLow operating and maintenance costs with high efficiency, proven reliability and intelligent battery managementPatented green operating mode achieves efficiencies over 97%. Smart-ups was the first network UPS to be Energy Star certified. Intelligent battery management, pioneered by APC, maximizes battery performance and life through intelligent, precision temperature compensated charging.Dynamic battery replacement date indicator and automatic self tests insure battery reliability and warn in advance of needing replacement. Convenient, easy to connect, hot-swappable battery modules provide battery replacement without powering down. Designed and manufactured by APC for over 23 years, Smart-UPS is the world’s most trusted network UPS with over 25 million units sold.Save time with easy and convenient remote accessibilityNetwork manageable via serial, USB or optional ethernet. Includes Powerchute® Business Edition Software for convenient monitoring and control, safe operating system shutdown and innovative energy management capabilities.Smarter productivity with ability to tailor to your specific application needsIntuitive LCD interface provides clear information with the ability to configure the UPS locally with easy to use navigation keys. Over 15 different programmable settings including switched outlet group control allow for application specific settings, thresholds and notifications.Peace of mind that comes with full equipment compatibility and reliability of a leaderProvides pure sine wave output which is recommended by server manufacturers using active power factor corrected (PFC) power supplies. Safety agency tested and approved means that you can deploy Smart-UPS with confidence that they meet or exceed the industry’s most rigorous standards.Avoids costly power problems by keeping your IT equipment and data safe and availableNetwork grade power conditioning protects from damaging surges and disruptive noise. Solid state automatic voltage regulation boosts low input voltage up to 30% and trims high voltage up to 12% without battery operation. Reliable battery back-up capacity to power through outages or gracefully shutdown systemsServiceabilityResettable circuit breakersEnables a quick recovery from overload events.Hot-swappable batteriesEnsures clean, uninterrupted power to protected equipment while batteries are being replacedPredictive failure notificationProvides early-warning fault analysis ensuring proactive component replacement.User-replaceable batteriesIncreases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)Battery failure notificationProvides early-warning fault analysis on batteries enabling timely preventive maintenanceAdaptabilityAdjustable voltage-transfer pointsMaximizes useful battery life by widening the input voltage window or tightening the output voltage regulation.Adjustable voltage sensitivityProvides the ability to adapt the UPS for optimal performance in specific power environments or generator applications.