Showing 270–280 of 867 results

A mini-tower UPS with line interactive topology, the CyberPower Intelligent LCD CP1500AVRLCDTAA provides battery backup (using simulated sine wave output) and surge protection for desktop computers, workstations, networking devices, and VoIP phone systems. The CP1500AVRLCDTAA uses Automatic Voltage Regulation (AVR) to correct minor power fluctuations without switching to battery power, which extends battery life. AVR is essential in areas where power fluctuations occur frequently. The CP1500AVRLCDTAA comes with a three-year warranty (including coverage of batteries), a $500,000 Connected Equipment Guarantee, and complies with the U.S. Trade Agreement Act (TAA).Battery BackupSupplies power long enough for equipment to properly shut down when utility power fails. Helps prevent loss of data and minimizes the component stress caused by a hard shutdown.Surge ProtectionDiverts excess voltage away from sensitive electronic equipment during an AC power surge or power spike to prevent damage.Automatic Voltage Regulation (AVR)AVR increases the AC power and maintains a safe voltage level without switching to battery mode and conserving battery life.Multifunction LCDDisplays immediate, detailed information on the UPS battery and power conditions, alerting users to potential problems before they can affect critical equipment and cause downtime.Data Line ProtectionPrevents power surges that travel through coaxial and Ethernet lines from causing damage to electronics.Line Interactive TopologyExists when a line interactive UPS has an autotransformer that regulates low voltages (e.g., brownouts) and over voltages (e.g., spikes) without having to switch to battery.Simulated Sine Wave OutputProvides a manufactured waveform output to supply cost-effective battery backup power for equipment that does not require sine wave output.ENERGY STARThis model is an ENERGY STAR® certified Uninterruptible Power Supply (UPS) system. ENERGY STAR is the trusted, government-backed symbol for energy-efficient products and practices that help save money and protect the environment.GreenPower UPS™ Bypass DesignA patented design that allows utility power to bypass the UPS transformer, when AC power is stable, which reduces energy consumption, noise, and heat buildup.Ultra Quiet DesignMinimizes noise during operation for a quieter work environment.PowerPanel® Personal SoftwareProvides a user-friendly dashboard interface for controlling and monitoring the UPS. Free software download available.

Tripp Lite SMART1524ET uninterruptible power supply (UPS) Line-Interactive 1.5 kVA 1200 W 6 AC outlet(s)

Tripp Lite SMART1548ET uninterruptible power supply (UPS) Line-Interactive 1.5 kVA 1200 W 6 AC outlet(s)

IBM UPS 1500VA LCD 1.5 kVA 1000 W 6 AC outlet(s)

IBM 1500VA LCD 2U Rack UPS (230V)

IBM UPS 3000VA LCD uninterruptible power supply (UPS) 3 kVA 2700 W 6 AC outlet(s)

Tripp Lite SmartPro Line Interactive UPS with enhanced LCD interface offers network-grade power protection for critical server, network and telecommunications equipment. Line Interactive Uninterruptible Power Supply (UPS) with built-in Auto-Voltage Regulation (AVR) actively corrects brownouts and overvoltages back to usable levels while maintaining a full battery charge in case of power failure. Interactive LCD interface reports UPS operating mode, detailed UPS and site-power data, plus enables a variety of UPS setup and configuration options. Super-fast switchover from line to battery power occurs within milliseconds to maintain operation of connected equipment without interruption or reboot. 95% line-mode efficiency offers reduced heat emissions and operating costs. Network management interfaces support communications via USB, RS-232 and optional SNMPWEBCARD network interface. HID-compliant USB port enables integration with built-in power management and auto shutdown features of Windows and Mac OS X. Network communications ports enable detailed monitoring of equipment load levels, self-test data and utility power conditions. Includes PowerAlert monitoring software and complete cabling. Switched output load banks enable scheduled and real-time remote reboot and load shedding of select outlets. Emergency Power Off (EPO) interface. LCD display panel easily rotates for viewing in rackmount or tower configurations. Audible alarm with push-button momentary alarm-cancel and silent-mode configuration options. Programmable self-test. Field-replaceable, hot-swappable battery modules.- Tripp Lite SMART1000RM2U line interactive 2U rack/tower UPS with 1000VA / 1kVA / 800W capacity- Line interactive UPS with Automatic Voltage Regulation (AVR) corrects brownouts and overvoltages from 83 to 145V- NEMA 5-15P input plug; 6 NEMA 5-15R output receptacles, Two independently switchable output load banks- Maintains uninterrupted operation of connected networking equipment during blackouts, surges, brownouts and overvoltages- High 95% efficiency rating in line-power mode offers reduced power consumption and BTU emissions- Internal batteries offer 15 minutes at 50% load (400W) and 5.3 minutes at 100% load (800W)- Hot-swappable, user-replaceable internal batteries can be replaced with no disruption to connected equipment- Front panel LCD monitoring screen with MODE and ENTER buttons reports operating mode with 5-bar battery charge graphic, plus 7 selectable screens of detailed UPS and site power information- LCD interface also supports a number of advanced user setup and operating preferences- Ships with 4 post rackmount installation hardware; Optional 2POSTRMKITWM enables 2 post rackmount/wallmount installation; Optional 2-9USTAND enables tower placement- Built-in USB, RS-232 and optional SNMPWEBCARD accessory monitoring options- HID-compliant USB port enables integration with built-in power management and auto shutdown features of Windows and Mac OS X- Included PowerAlert UPS monitoring software; Built-in Emergency Power Off (EPO) interface with cable

User-replaceable batteries Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR).Flexible Design Available in a wide range of configurations to suit any operating environmentMultiple mounting methods Allows for standardization on one product for use in different environments.Plug-and-Play external batteries Ensures clean, uninterrupted power to the loads when adding extra runtime to the UPS.Automatic restart of loads after UPS shutdown Automatically starts up the connected equipment upon the return of utility power.Automatic self-test Periodic battery self-test ensures early detection of a battery that needs to be replaced.Cold-start capable Provides temporary battery power when the utility power is out.Power conditioning Protects connected loads from surges, spikes, lightning, and other power disturbances.Wide input voltage range Designed for harsh electrical environments to save battery life.Intelligent battery management Maximizes battery performance, life, and reliability through intelligent, precision charging.LED Indicators Provide easy-to-read status of the unit and utility power conditions.Optional Dry Contact I/O Accessory Each Dry Contact I/O Accessory increases the number of input contacts by 2 and output relays by 1SmartSlot Customize UPS capabilities with management cards.Hot-swappable batteries Ensures clean, uninterrupted power to protected equipment while batteries are being replaced.Technical support Our experienced technical support engineers are available to answer your questions, giving you peace of mind knowing the help you need is there when you need it.User-replaceable batteries Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR).

Intelligent and efficient network power protection from entry level to scaleable runtime. Ideal UPS for servers, point-of-sale, routers, switches, hubs and other network devices.

APC SRT6RMM uninterruptible power supply (UPS) 6 kVA