Tripp Lite SMART5000XFMRXL Tripp Lite SMART5000XFMRXL uninterruptible power supply (UPS) Line-Interactive 5 kVA 3750 W 11 AC outlet(s)

PRODUCT DETAILS:

Tripp Lite 5kVA Smart RM UPS. 5000VA line-interactive UPS for server, network and telecommunications equipment. UPS with internal batteries requires 3 rack spaces installed. Accepts 208V nominal input voltage. Simultaneous 208 & 120V output. Corrects brownouts and overvoltages from 167V to 260V. Sine wave output. Maintains battery-derived AC output during blackouts and severe voltage fluctuations. Expandable runtime with optional external battery packs. 11 output receptacles. NEMA L6-30P input connection with support for user-supplied 50A or hardwire input. Network-grade AC surge and noise suppression. Network management interfaces include USB, DB9 serial and SNMPWEBCARD slot. Supports simultaneous detailed monitoring of equipment load levels, self-test data and utility power conditions via all network interfaces simultaneously. Includes PowerAlert monitoring software and complete cabling. Emergency Power Off (EPO) interface. Integrated 8-bank switched PDU. 3-stage metered current monitoring and battery charge LEDs. Utility power and voltage regulation LEDs. Audible alarm. Self-test. 4-post rack mounting accessories included; 2-9USTAND and 2POSTRMKITWM accessories available. Field-replaceable, hot-swappable internal batteries and battery packs.- 5000VA/3750 watt max. output power capacity compatible with North American 208V/60Hz input voltage- Supports full output at either 208V or 120V- 3U rack/tower UPS installs in standard 19 inch rack enclosures with an installed depth of only 25 inches / 63.5cm- Protects sensitive networking equipment from blackouts, voltage fluctuations and transient surges- Line Interactive Automatic Voltage Regulation (AVR) corrects 208V nominal input from 167 to 260VAC back to usable 208/120V levels without consuming battery power- AVR circuits boost undervoltages by 12% and reduce overvoltages by 12%- Network interfaces support simultaneous communications via USB, DB9 serial and SNMPWEBCARD slot- Included PowerAlert UPS monitoring software supports safe unattended shutdown, monitoring and control via local connected servers, plus any number of additional servers over IP- Communications ports support on-battery, low-battery, power-restored, AC-voltage, DC-voltage, output current monitoring, battery charge current, battery capacity, internal UPS temperature, AC line frequency, timed inverter shutoff, activate self-test and load bank output power control- Built-in Emergency Power Off (EPO) interface with cable- Sine wave output in AC and battery mode- Expandable runtime with optional BP48V24-2U (limit 1), BP48V60RT-3U (multi-pack compatible) and BP48V27-2US (multi-pack compatible) external battery packs- Half/full load runtime of 20/8.5 minutes with internal batteries- Includes 11 output receptacles (2 L6-20, 1 L6-30 & 8 NEMA 5-15/20R)- Ships with installed L6-30P input plug, supports user supplied 50A replacement plug or hardwire input- Integrated 8 bank switched PDU enables remote outlet management for load shedding or remote reboot of individual devices- 3 stage metered LEDs offer current monitoring and battery charge level- Mains power and voltage regulation LEDs offer at-a-glance power status information- Front panel switches support self-test and alarm cancel functions- Included adjustable mounting rails support installation in 4 post 19 inch racks- UPS ships fully assembled in full compliance with DOT regulations, no time consuming connection of internal batteries by user is required- Supports 2 post rackmount installation with optional 2POSTRMKIT accessory- Supports upright tower placement with optional 2-9USTAND accessory