"Versatility. That one word sums up what you get when you purchase RAM products. For Kayaks, versatility is key since space is always at a premium. Whether it's to make some room or put your fishing rod within easy reach, the 9"" pipe spline post for kayaks will do the trick. Getting your rod holder up high for stand up fishing is easy with this new product. The quick release female post and spline adaptor is simple and easy to release. Building on an already impressive line of Kayak products, this extension option is a simple add-on that is sure to add more fun and comfort to your day on the water."
"The RAP-299-3-B-102U consists of a double socket arm, two diamond bases and RAM-A-CAN II cup holder base. The diamond bases measure 2.43"" x 1.31"" diamond base and contain two holes 1.912"" from center to center, positioned at both ends of the diamond base. The hole pattern found on the diamond bases will connect to many RAM cradles, as well as third party cradles including mounts with the industry standard AMPS hole pattern. Designed into the mount is a 1"" diameter patented rubber ball and socket system with adjustment points at both socket ends of the arm. The RAM-A-CAN II cup holder base serves as a mounting point for the diamond base. Compatible with any vehicle cup holder with an inside diameter range of 2.57"" to 3.5""."
"The RAM-HOL-TABL12U consists of a spring loaded backplate, custom support cups and locking mechanism for the iPad mini WITH skin, sleeve or case. This spring loaded design makes it easy to load and unload your iPad mini, along with keeping it secure while on the go. Cup ends are designed to optimize the functionality of your tablet, allowing access to audio jacks, usb, power, and other ports, your iPad mini can be used just as it was intended. Quickly lock the cradle, keeping your iPad mini secure and safe from theft. Included is a set of four nuts and bolts to connect the cradle to any RAM components or mounts that contain the universal AMPs hole pattern. The included back plate is interchangeable with various size support cups, making it compatible with numerous tablet models. New detachable support cups are the only components needed for purchase, attach to the back plate for support of your new tablet. The Tab-Lock cradle is compatible with any tablet that will fit the dimensions listed below. It is important to verify the dimensions of your tablet when determining the overall size. Cradle Dimensions: Height: 6.75"" to 8.75"" Width: 5.06"" to 5.68"" Depth: 0.13"" to 1"" Note: Product consists of holder only. Case not included."
The RAM EZ-Roll'r Powered Key Locking Cradle for Sonim XP8 secures your device in a form-fit holder while keeping the entire screen and buttons visible and accessible. This powered cradle features two integrated pogo pins that provide charging capabilities to the device through male USB Type A connector, and includes key lock for extra security and peace of mind. Single-handed operation makes it easy to dock and remove the Sonim XP8—simply lift the top lever and pull out the device, or place bottom portion of the device in first and push in to lock in place. Compatible with RAM two-hole AMPS pattern bases and RAM® microphone brackets, this RAM form-fit cradle easily connects to B and C size ball mounts for use in a wide variety of applications.
"The spring loaded cradle is durable and allows for easy removal or insertion of your tablet. Cup ends are designed to optimize the functionality of your tablet, allowing access to audio jacks, usb, power, and other ports, your tablet can be used just as it was intended. With a full complement of compatible mounts, you are sure to find the perfect solution for all your mobile needs.Included is a set of four nuts and bolts to connect the cradle to any RAM components or mounts that contain the universal AMPs hole pattern. The Tab-Tite cradle is compatible with any tablet that will fit the dimensions listed below. It is important to verify the dimensions of your tablet when determining the overall size. Please see the compatible devices for known devices that fit in this cradel. Cradle Dimensions: Height: 9.75"" to 12"" Width: 6.38"" to 8.62"" Depth: 0.13"" to 1"""
"The RAM Tab-Tite spring loaded, quick release cradle offers a secure fit with easy access to the mounted tablet. The interchangeable cup ends are designed specifically for the Samsung Galaxy Tab 4 8.0 and Tab S 8.4 with an Otterbox Defender case. The spring loaded design makes it easy to insert and remove your tablet, along with keeping it secure in mobile applications. The custom end cups are designed to optimize the functionality of your tablet, enabling access to all ports and tablet functions. The included back plate is interchangeable with various size support cups, making it compatible with numerous tablet models. New detachable support cups are the only components needed for purchase, attach to the back plate for support of your new tablet. Included is a set of four nuts and bolts to connect the cradle to any RAM components or mounts that contain the universal AMPs hole pattern. For off-road environments and extreme use, we recommended the use of a tether to assist in retaining your device. The Tab-Tite cradle is compatible with any tablet that will fit the dimensions listed below. It is important to verify the dimensions of your tablet when determining the overall size. Cradle Dimensions: Length: 8.32"" to 10.92"" Width: 4.43"" to 5.3"" Depth: 0.13"" to 0.62"" Note: Product consists of holder only. Case not included."
"The RAM Tab-Tite spring loaded, quick release cradle offers a secure fit with easy access to the mounted tablet. The interchangeable cup ends are designed specifically for the Samsung Galaxy Tab A 8.0 and Tab A 8.0 with S Pen. The spring loaded design makes it easy to insert and remove your tablet, along with keeping it secure in mobile applications. The custom end cups are designed to optimize the functionality of your tablet, enabling access to all ports and tablet functions. Included is a set of four nuts and bolts to connect the cradle to any RAM components or mounts that contain the universal AMPs hole pattern. For off-road environments and extreme use, we recommended the use of a tether to assist in retaining your device. The Tab-Tite cradle is compatible with any tablet that will fit the dimensions listed below. It is important to verify the dimensions of your tablet when determining the overall size. Note: This RAM Tab-Tite is not compatible with the Samsung Galaxy Tab A 8.0 (2017). For this tablet, see RAM-HOL-TAB24U . Cradle Dimensions: Height: 7.88"" to 10.38"" Width: 4.3"" to 5.3"" Depth: 0.0"" to 0.37"""
RAM Mounts RAM-HOL-TAB4U holder Passive holder Tablet/UMPC Black
"The RAM-HOL-TABL20U consists of a spring loaded back plate, custom support cups and locking mechanism offers theft deterrence and unwanted tampering in public settings. This spring loaded design makes it easy to load and unload your iPad Air, along with keeping it secure while on the go. Cup ends are designed to optimize the functionality of your iPad, allowing access to audio jacks, usb, power, and other ports, your iPad can be used just as it was intended. Quickly lock the cradle, keeping your iPad Air secure and safe from theft. Included is a set of four nuts and bolts to connect the cradle to any RAM components or mounts that contain the universal AMPs hole pattern. The included back plate is interchangeable with various size support cups, making it compatible with numerous tablet models. New detachable support cups are the only components needed for purchase, attach to the back plate for support of your new tablet. The Tab-Lock cradle is compatible with any tablet that will fit the dimensions listed below. It is important to verify the dimensions of your tablet when determining the overall size. Cradle Dimensions: Height: 9.25"" to 11.375"" Width: 6.55"" to 7.43"" Depth: 0.3"" to 0.875"" Note: Product consists of holder only. Case not included."
"The RAM-HOL-UN8B-201U consists of a STANDARD length double socket arm and universal X-Gripclamping cradle for 7""-8"" tablets. The double socket arm is 3.69"" in length and will accept all RAM 1"" diameter ball bases. The spring loaded X-Grip cradle expands and contracts, allowing for a perfect custom fit of your 7""-8"" tablet. Included are extra easy access grip knobs, located on the back of the cradle for quick release of your tablet. The X-Grip includes a device tether recommended for outdoor applications. The cradle is compatible with handheld devices that will fit the dimensions listed below. It is important to verify the dimensions of your handheld device with a case/sleeve/skin when determining the overall size. Cradle Dimensions Minimum Width = 2.5"" (Minimum Height = 7"") Maximum Width = 5.75"" (Minimum Height = 4"") Depth = 0.875"""
MFR: Netgear, Inc
Qty: 1
Part #: GS105NA