Showing 270–280 of 11000 results

This SmartRack open frame rack has no doors or side panels. It features integrated baying tabs to combine multiple racks in rows for data center applications. It is compatible with hot-aisle/cold-aisle configurations.The SR42UBEXPND houses 3000 lbs (1360.8 kgs) of standard 19-inch rack equipment in 42U. Square mounting holes on its rear and front vertical mounting rails adjust in quarter-inch increments from 4 to 37 inches. Each rack space is numbered for at-a-glance reference. An easy-to-read depth index ensures consistent rail placement without requiring time-consuming measurements.Two vertical mounting rails support toolless button-mount 0U installation of four compatible PDUs and cable managers. This makes it easier to route cabling to rack equipment and reduces cord clutter.Components are grounded to the enclosure frame. Threaded grounding points are provided for connection to the facility earth ground.To simplify deployment, the SR42UBEXPND includes preinstalled casters that enable it to be easily maneuvered into the desired location, where it can be secured by adjusting the preinstalled levelers. Note: the casters are intended for minor position adjustments and are not designed for moving the enclosure over long distances.

ASUS ASUS FN TUF GAMING TF120 ARGB Advanced FDB 5V AURA Sync Retail

Fixed Shelf, 1U Cantilever mount, Cold rolled steel with black finish. Required mounting hardware included. Supports up to 40 lbs (18.1 kgs)Use two shelves back to back to create a deep fixed shelf in 2POST racks.

Saves Valuable WorkspacePerfect for network wiring closets, retail locations, classrooms, back offices and other areas with limited floor space where you need equipment to be secure, organized and out of the wayHouses EIA-standard 19 in. rack equipment in 10U of spaceMaximum load capacity of 200 lb.Hinged Cabinet for Convenient AccessSwings away from the wall to allow easy back-door access to equipment and cabling during installation and maintenanceRotate cabinet 180° before mounting to open reversible doors left or rightShatter-Resistant Clear Acrylic Front WindowLets you monitor equipment without unlocking the enclosurePrevents equipment tamperingReduces acoustic noiseProvides extra visual flairKeeps Important Equipment SecureSide panels and doors lock securely to help prevent damage, tampering or theftVented panels allow generous airflow that keeps equipment coolConvenient ports with removable covers allow cable routing through top and bottomEasy Enclosure and Equipment InstallationShips fully assembled for quick installationMounts to wall or rolls on floor with optional SRCASTER caster kitWall-mounting holes spaced 16 in. apart for standard wall stud placementVertical mounting rails adjust in 7/8 in. increments to accommodate equipment up to 20.5 in. deep, such as network switches and patch panelsRails support square-hole or 12-24 threaded-hole mountingRack spaces numbered for easy referenceMeets Payment Card Industry StandardsProvides physical equipment and media security required for PCI DSS (Payment Card Industry Data Security Standard) compliance

Mount equipment that is up to 14 inches deep, such as patch panels or network switches, to your wallThis wall-mount bracket provides 8U of space for mounting shallow rack-mount equipment that's 13.75 in. (34.93 cm) deep or less to the wall, such as patch panels or network switches.Improve efficiency and accessibility in your workspaceThe 8U rack optimizes your working space by efficiently mounting your shallow equipment on your wall instead of taking up desk space or other usable surface areas. It's the perfect solution for your space-limited SoHo (small office, home office) environment or server room because it doesn't take up any floor space.Ensure a secure and hassle-free installationThe wall rack is constructed of solid steel to ensure a sturdy and safe mounting solution for your mission-critical equipment. Also, because the wall rack's mounting holes are positioned 16 in. apart, it exactly matches standard drywall construction framework to ensure simple and secure wall-stud anchoring.The rack also features a rear access panel that can be used to easily run cabling into the rack.Cage nuts and screws are included with the wall-mount bracket, to save you the hassle of sourcing separate mounting hardware.If you're looking for a shallow mounting solution with fewer or more rack units, StarTech.com also offers a 6U wall-mount bracket, and a 12U wall-mount bracket.The WALLMOUNT8 is backed by a StarTech.com lifetime warranty and free lifetime technical support.The StarTech.com Advantage

Thermaltake S100 TG Micro Tower Black

These lacing bars install horizontally on the front or back of your rack to provide a secure mounting point for you to run cables. You can attach your cables to the lacing bars using cable ties to reduce the tension on your cables and prevent damage to the ports on your rack-mount equipment. The lacing bars feature a 4 in. offset for hassle-free cable access.Protect your equipmentCable lacing bars protect your equipment by offloading the weight of the cables in your rack, which reduces the constant strain that can be put on the ports of your rack equipment. The lacing bars also provide a route for cables, which enhances passive cooling within your rack. This helps to ensure your rack remains at an optimal temperature, to extend the life of your equipment and minimize or eliminate downtime.Discreet and sturdy designThese cable lacing bars are constructed of solid steel and occupy just one-third of a rack U at each install point. The lacing bars are engineered to run horizontally and feature a 4 in. offset at 75 degrees, which enables you to easily run cables from the back of your equipment. The round solid-steel design ensures a high weight capacity, unlike flat lacing bars that can bend easily.Save on shipping costsThis package includes 10 cable lacing bars, enabling you to buy multiple bars packaged together. This is ideal for large-scale implementations, because it significantly reduces the packaging, and in turn, shipping costs.The CMLB104 is backed by a 2-year StarTech.com warranty and free lifetime technical support.

Netshelter SX Roof Fan Tray 115 VAC .

ThinkCentre Tiny Power Cage II is a mounting solution that provides an efficient and secure power adapter mounting solution for your Tiny PC. To complete this solution, the ThinkCentre Tiny Sandwich Kit II (4XH0N04098) or Tiny VESA Mount II (Option PN: 4XF0N03161) is required.

ROG Strix LC II 360 delivers high-performance CPU liquid cooling with sleek, modern aesthetics. Featuring a closed-loop design and ROG radiator fans, the cooler unleashes the full potential of an Intel® or AMD CPU while enabling subtle multicolor lighting effects to accentuate your build.NEXT-LEVEL CUSTOMIZATIONEmanate Your StyleFrom end to end, ROG Strix LC II 360 showcases the iconic ROG aesthetic. Engraved ROG lettering on the radiator’s side complements the iridescent lettering on the hubs of each fan. And the Aura Sync-compatible pump cover radiates the new ROG logo in any color you choose.Optimized Fan DesignThe ROG radiator fans are specifically tuned to deliver optimum performance on ROG Strix LC II series radiators. The fans generate 81 CFM / 5.0 mmH2O for exceptional cooling efficiency.Enhanced Pump DesignROG Strix LC II series is equipped with the latest cooling-plate design. Machined from pure copper, the plate features an array of fine micro-channels that reduce thermal resistance and increase surface area, resulting in lower CPU temperatures.PWM-Controlled Pump and FansPWM control enables both the pump and radiator fans to spin at slower speeds when the CPU is idling or under light load, helping to keep noise levels to a minimum.COMPREHENSIVE COMPATIBILITYROG Strix LC II series is compatible with a wide range of Intel® and AMD motherboard platforms, giving you the flexibility to pair it with your choice of processor. With 380mm of tubing at your disposal, radiator installation is equally as flexible in a variety of chassis.